McCluskey Tennis Center Tennis Court Lighting Specifications
Four Hydro Soft Courts - Tech Light Center Pro Vertical Burn
**Electrician must have experience with athletic lighting.**
1. Furnish and install conduit from the electrical panel to five (5) rows of lights. Conduit will be run
along the south side of the court and connected to the conduits stubbed out by the lighting
contractor. Furnish all wiring to the light poles in the new conduits installed by contractor. Install
inline fusing at the base of the poles and make connections to the fixtures at the base of four (4)
poles. Install a 20 amp receptacle on the base of fur (4) poles.
2. Remove four (4) existing 40’ poles and haul to Recreation Center. Removal of fencing for access to
The two (2) poles on the east side of the court. Place plywood down for access to the poles.
3. TECH LIGHT CENTER COURT PRO VERTICAL BURN Sport Lighting System to be installed.

Furnish and install twelve (12) 4” OD and two (2) 5” OD 21’ high direct mounted poles. Poles will
be mounted inside the fence.

Remove eight (8) low level fixtures and four (4) arms that are currently in place (ct. 10-11). The
existing poles will be re-used and painted.

Furnish and install thirty-two (32) 1000-watt metal halide fixtures.

Install all wiring from fixtures to the bottom of each pole.

Aim and adjust all fixtures to insure proper court coverage.

Furnish and install conduit inside the court area and stub up for electrician

Patch all trenches with Hydroblend material.

Clean site of all debris created through installation
McCluskey Tennis Center Tennis Court Lighting
Bid Response Sheet
Total Price
Warranty Details
Date Work Can Begin
Time to Complete
Company
Address
Telephone Number
E-mail address
Signature of Authorized Company Representative
Printed Name of Representative