SDS # 52022
Revised 02/01/15
SDS # 52022
Revised 02/01/15
1801 Morgan Street
Rockford, IL 61102
Phone: (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com
SECTION 1: Identification SECTION 1: Identification
SAFETY DATA SAFETY
SHEET DATA SHEET
MSDS Number: 204
Revision Date: 06/10/2015
Supersedes Date: 03/14/2014
MATERIAL SAFETY DATA SHEET
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200
Heat Sink Compound
Heat
SinkAOS
Compound
Product Name: HEAT SINK TYPE 44 NON-SILICONE
AOS Product Code: 52022 AOS Product Code: 52022
REACH
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Ready!
Manufacturer:
REACH
Ready!
Numbers:
AOSType:
Thermal
Compounds
Solvent
Release
Adhesive
RTVEmergency Telephone
Emergency
Contact: Chemtrec
Emergency
Telephone
Numbers:
pounds Product
Health:
(732)
389-5514
9-5
EST M-F (800) 424-9300
22
Meridian
Road,
Suite
6
HEAT
SINK
TYPE
44 NON-SILICONE
Phone:
Health:
(732)
389-5514
9-5 EST M-F
Suite 6 Product Name:
Flammability:
(732) 389-5514 9-5 EST M-F
New
Jersey
07724
PartEatontown,
Number(s):
10-8118
Flammability:
(732) 389-5514 9-5
EST M-F
rsey 07724
(732)
389-5514
10-8120
10-8126
SECTION 2: Hazard Identification
SECTION
2: Hazard Identification
SECTION 2. HAZARD IDENTIFICATION
Skin
Irritant
(skin andCauses
eyes) skin irritation.
Skin
Irrit.
2 H315
Eye Irrit. 2A H319
Causes serious eye irritation.
Skin Irritant (skin and eyes)
SECTION on
3: ingredients
Composition/information on ingredients
ON 3: Composition/information
SECTION 3. COMPOSITION/INFORMATION
ON INGREDIENTS
nc Oxide
840600 # 5000P
840600 # 5001P
840600 # 5002P
CAS Registry #
Zinc1314-13-2
Oxide
00840600
# 5000P
(Trade Secret)
00840600
# 5001P
(Trade Secret)
00840600
# 5002P
(Trade Secret)
CAS Registry #
1314-13-2
(Trade Secret)
(Trade Secret)
(Trade Secret)
SDS # 52022
Revised 02/01/15

Based
on
the
data
available
to
AOS,
this
product
is
not
considered
a
hazard
under
OSHA
Hazard
lable to AOS, this product is not considered a hazard under OSHA Hazard
Communication Standard 29 CFR1910.1200.
ard 29 CFR1910.1200.

The
Zincform
Oxide
thisnot
product
in paste
form and will not pose a dust hazard.
s product is in
paste
andinwill
pose aisdust
hazard.
SECTION 4: First Aid Measures
SECTION 4. FIRST AID MEASURES

Route of Exposure
 Inhalation: N/A
 Skin: Wash with soap and water
 Eye Contact: Flush eyes with water
 Ingestion: Consult a physician; do not induce vomiting
AOS Thermal Compounds
AOS Thermal Compounds
02/01/15  Page 1
02/01/15  Page 1
PartTel.
Number(s):
10-8118,
10-8126
(732)389-5514
2210-8120,
Meridian
Road,
6, Eatontown, NJ 07724 Fax (732)389-6380
Meridian Road,
Suite 6, Eatontown,
NJ 07724
FaxSuite
(732)389-6380
Page 1 of 5
SDS # 52022
SDS
#
Revised
SDS02/01/15
# 52022
52022
Revised
02/01/15
Revised 02/01/15
1801 Morgan Street
SECTION 4: First Aid Measures
Rockford, IL 61102
SECTION
SECTION 4:
4: First
First Aid
Aid Measures
Measures
Phone:
(815)
968-9661
 Route of Exposure
 Route
of
Exposure
Fax:
(815)
968-9731
Route
Inhalation:
N/A
of
Exposure

Inhalation:
www.gcelectronics.com
Skin: WashN/A
with soap and water
 Inhalation:
N/A



MSDS Number: 204
Revision Date: 06/10/2015
Supersedes Date: 03/14/2014
Skin:
Wash
soap
and
water
Eye Contact:
Flush
eyes
with
water
Skin:
Wash with
with
soap
and
water
MATERIAL
SAFETY DATA SHEET
Eye
Contact:
Flush
eyes
with
Ingestion:
Consult
physician;
do not induce vomiting
Eye
Contact:
Flushaeyes
with water
water
Complies
with
OSHA
Hazard
Communication
Standard 29 CFR 1910.1200
Ingestion: Consult a physician; do not induce vomiting
Ingestion: Consult a physician; do not induce vomiting
Product Name: HEAT SINK TYPE 44 NON-SILICONE
SECTION 5:
SECTION
SECTION 5:
5:
SECTION 5. Fire Fighting Measures




Fire Fighting Measures
Fire
Fire Fighting
Fighting Measures
Measures
Extinguishing Media: Foam, Carbon Dioxide, Dry Chemical
Extinguishing
Media:
Carbon
Dioxide,
Chemical
Fire
Fighting Instructions:
Wear
self-contained
breathing
apparatus for enclosed or confined areas
Extinguishing
Media: Foam,
Foam,
Carbon
Dioxide, Dry
Dry
Chemical
Fire
Instructions:
Wear
breathing
Unusual
Fire &
Explosion Hazards:
None known
Fire Fighting
Fighting
Instructions:
Wear self-contained
self-contained
breathing apparatus
apparatus for
for enclosed
enclosed or
or confined
confined areas
areas
Unusual
Fire
&
Explosion
Hazards:
None
known
Unusual Fire & Explosion Hazards: None known
SECTION 6: Accidental Release Measures
SECTION
6:
Release
SECTION
6: Accidental
Accidental
Release Measures
Measures
SECTION 6. ACCIDENTAL
RELEASE
MEASURES






Personal precautions – Do not ingest, protective equipment – wear gloves
Personal
precautions
–
protective
Collect
and repackage
in a container.
Personalproduct
precautions
– Do
Do not
not ingest,
ingest,
protective equipment
equipment –– wear
wear gloves
gloves
Collect
product
and
repackage
in
a
container.
Dispose
productand
in landfill
as environmental
Collect product
repackage
in a container.precaution
Dispose
product
as
precaution
For
containment
andlandfill
clean up
use common solvents
such as mineral spirits or acetone followed by
Dispose
product in
in
landfill
as environmental
environmental
precaution
For
containment
and
clean
up
use
common
solvents
such as mineral spirits or acetone followed by
soap
and
water
For containment and clean up use common solvents such as mineral spirits or acetone followed by
soap and water
soap and water
SECTION 7: Handling and Storage
7:
SECTION 7. HANDLINGSECTION
AND STORAGE
SECTION
7: Handling
Handling and
and Storage
Storage
 Storage temperature: Ambient
 Storage
Ambient
Storage temperature:
pressure:
Atmospheric
temperature:
Ambient
 Storage
Atmospheric
General:
Keep container
closed
Storage pressure:
pressure:
Atmospheric
 General:
Keep
container
Avoid
direct
flames
General:
Keep
container closed
closed
 Avoid
direct
flames
Avoid direct flames
SECTIONCONTROLS,
8: Exposure Controls, Personal
Protection
SECTION 8. EXPOSURE
PROTECTION
SECTION 8: ExposurePERSONAL
Controls, Personal
Protection








SECTION 8: Exposure Controls, Personal Protection
Control Parameters (Biological): N/A
Control
(Biological):
Appropriate
Engineering
controls:N/A
Gloves
Control Parameters
Parameters
(Biological):
N/A
Appropriate
Engineering
controls:
Gloves
Respiratory
necessary
Appropriate Protection:
EngineeringNot
controls:
Gloves
Respiratory
Protection:
Not
necessary
Ventilation:
Under normal
Respiratory Protection:
Not conditions,
necessary no special ventilation is needed
Ventilation:
Under
normal
no
Skin
Protection:
Gloves
areconditions,
not necessary
Ventilation:
Under
normal
conditions,
no special
special ventilation
ventilation is
is needed
needed
Skin
Protection:
Gloves
are
necessary
Eye
not necessary
SkinProtection:
Protection: Safety
Glovesglasses
are not
notare
necessary
Eye
Safety
are
not
Work/Hygienic
Safety
& gloves are recommended
Eye Protection:
Protection: Practices:
Safety glasses
glasses
areglasses
not necessary
necessary
Work/Hygienic
Work/Hygienic Practices:
Practices: Safety
Safety glasses
glasses &
& gloves
gloves are
are recommended
recommended
AOS Thermal Compounds
Part Number(s): 10-8118, 10-8120,
10-8126
AOS
Thermal
Tel. (732)389-5514 22 Meridian
Road,
Suite 6,Compounds
Eatontown, NJ 07724 Fax (732)389-6380
AOS
Thermal
Compounds
Tel.
(732)389-5514
22
Meridian
Road,
Suite
6,
Page 2 NJ
Tel. (732)389-5514 22 Meridian02/01/15
6, Eatontown,
Eatontown,
NJ 07724
07724 Fax
Fax (732)389-6380
(732)389-6380
Road, Suite
Page 2 of 5
1801 Morgan Street
Rockford, IL 61102
Phone: (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com
MSDS Number: 204
Revision Date: 06/10/2015
Supersedes Date: 03/14/2014
MATERIAL SAFETY DATA SHEET
SDS # 52022
SDSRevised
# 52022
02/01/15
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200
Revised 02/01/15SDS # 52022
Revised 02/01/15
SECTION
9: Physical
and Chemical Properties
Product Name: HEAT
SINK TYPE
44 NON-SILICONE
SECTION 9: Physical and Chemical Properties
SECTION 9: Physical and Chemical Properties
SECTION 9. PHYSICAL
ANDWhite
CHEMICAL
Appearance:
Paste PROPERTIES
Specific Gravity: 2.7 (H2O=1)
Appearance: Odor:
White Paste
Odorless
Specific Gravity:
2.7 (H2O=1)
Appearance:
White Paste
Vapor
Pressure:
<0.1 mm
Hg
Specific
Gravity:
2.7 (H2O=1)
Odor:
OdorlessN/A
Odor
Threshold:
Vapor
Pressure:
<0.1
mm
Hg
Odor: Odorless
Vapor
Density:
Not relevant
Vapor
Pressure:
<0.1 mm Hg
Odor Threshold: N/A
pH: N/A N/A
VaporRelative
Density:Density:
Not relevant
Odor Threshold:
2.4 g/cc
Vapor
Density:
Not relevant
pH:
N/A
Melting Point/Freezing Point: pH:
N/A N/A
Relative
Density:in Water:
2.4 g/cc Insoluble
Solubility
Relative
Density:
2.4 g/cc
Melting
Point/Freezing
Point:
N/A
Initial
Boiling
and Boiling
Solubility
in Water:
Insoluble
MeltingPoint
Point/Freezing
Point:
N/A>204C
Partition
coefficient/
n>400F/
Solubility in Water:
tial Boiling Point and Boiling Range:
N/A Insoluble
Partition coefficient/
nInitial Boiling Point and
Boiling
>400F/
>204C
octanol/water
N/A
Partition
coefficient/
nRange:
>400F/
>204C
Flash Point:
565°F/296° (COC)
octanol/water
Range:
Auto-ignition
Temperature:
N/A N/A
octanol/water
Flash Point: 565°F/296°
(COC)
<0.01565°F/296°
(butyl
Auto-ignition
Temperature:
N/A
(COC)
EvaporationFlash
Rate:Point:
Decomposition
Temperature:
225 oC
Auto-ignition
Temperature:
N/A
<0.01
(butyl
acetate=1)
o
Evaporation Rate:
<0.01 (butyl
Decomposition
Temperature:
225
C
o
acetate=1)
Evaporation
Rate:
870,000,
LFL: acetate=1)
Not determined
Decomposition Temperature:
225 70,000
C
Flammability Limits:
-1
870,000,
70,000
LFL: NotUFL:
determined
Viscosity:
cP
@
1,
10
sec70,000
Not determined
870,000,
Flammability Limits:
LFL:
Not determined
-1
Viscosity: cP @ 1, shear
10 sec@ 25 oC
UFL:
Not
determined
Flammability
Limits:
Upper/lower Flammability
Limits:
N/A
@ 1, 10 sec-1
Viscosity: o cP
UFL: Not determined
shear
@
25 C
r/lower Flammability Limits: N/A
shear @ 25 oC
Upper/lower Flammability Limits: N/A
SECTION 10: Stability and Reactivity
SECTION
10: Stability and Reactivity
SECTION 10. STABILITY AND REACTIVITY
SECTION 10: Stability and Reactivity






 Reactivity: Product is stable; hazardous polymerization will not occur.
Reactivity:
ProductStability:
is stable;Inert
hazardous polymerization will not occur.
 Chemical
 Reactivity:
Product is stable; hazardous polymerization will not occur.
Chemical
Stability: of
Inert
 Possibility
Hazardous
None known
 Chemical
Stability: Reactions:
Inert
Possibility
of
Hazardous
Reactions:
None known
 Materials
&
Conditions
to
Avoid:
Strong
agents
 Possibility of Hazardous Reactions: oxidizing
None known
Materials
& Conditions
to Avoid:N/A
Strong oxidizing agents
 Incompatible
Materials:
 Materials & Conditions to Avoid: Strong oxidizing agents
Incompatible
Materials:
N/A
 Hazardous
Decomposition
Products:
 Incompatible
Materials:
N/A None known
Hazardous Decomposition Products: None known
 Hazardous Decomposition Products: None known
SECTION
11: Toxicological Information
SECTION 11. TOXICOLOGICAL
INFORMATION
SECTION 11: Toxicological Information
SECTION 11: Toxicological Information
 Route of Exposure
Route ofExposure
N/A
 Inhalation:
Route of Exposure
 Inhalation:
N/A
 Ingestion:
Consult
a physician
 Inhalation:
N/A
 Ingestion:
Consult
a with
physician
 Skin:
Wash
soap
water
 Ingestion: Consultand
a physician
 Skin: Wash
with
soapFlush
and water
Eye
Contact:
eyes
with
water
 Skin: Wash with soap and
water
 Eye Contact: Flush eyes with water
 Eye Contact: Flush eyes with water
Symptoms related to physical, chemical and toxicological characteristics: None known
Symptoms
relatedand
to physical,
chemical
andalso
toxicological
characteristics:
None
known
Delayed
immediate
effects
and
chronic
from short
and long
term
exposure:
Symptoms
related to
physical,
chemical
andeffects
toxicological
characteristics:
None
knownNone know
DelayedMeasures
and immediate
effectsN/A
and also chronic effects from short and long term exposure: None know
of
toxicity:
Delayed and immediate effects and also chronic effects from short and long term exposure: None know
Measures of toxicity: N/A
Measures of toxicity: N/A

Part Number(s): 10-8118, 10-8120, 10-8126
SECTION 12: Ecological Information
Page 3 of 5




Possibility of Hazardous Reactions: None known
Materials & Conditions to Avoid: Strong oxidizing agents
Incompatible Materials: N/A
Hazardous Decomposition Products: None known
SECTION 11: Toxicological Information
1801 Morgan Street
 Route ofILExposure
Rockford,
61102
 Inhalation:
N/A
Phone:
(815) 968-9661
 Ingestion: Consult a physician
Fax:
(815) 968-9731
 Skin: Wash with soap and water
www.gcelectronics.com

MSDS Number: 204
Revision Date: 06/10/2015
Supersedes Date: 03/14/2014
Eye Contact: Flush eyes with water
MATERIAL SAFETY DATA SHEET
Symptoms related to physical, chemical and toxicological characteristics: None known
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200
Delayed and immediate effects and also chronic effects from short and long term exposure: None know
Measures of toxicity: N/A
Product Name: HEAT SINK TYPE 44 NON-SILICONE
SECTION
12: Ecological Information
SECTION 12. ECOLOGICAL
INFORMATION




Ecotoxicity: N/A
Persistence and degradability: N/A
Bioaccumulative potential: N/A
Mobility in soil: N/A SECTION 13: Disposal Information
SDS # 52022
Revised
SDS02/01/15
# 52022
Revised
SDS02/01/15
# 52022
Revised 02/01/15
SECTION 13: Disposal Information
 Incinerate
dispose ofSECTION
materials
in 13:
accordance
with
local, state & federal regulations.
Disposal
Information
SECTION
13.orDISPOSAL
INFORMATION
 Incinerate or dispose of materials
accordance
with local, state & federal regulations.
AOSinThermal
Compounds
 Tel.
Incinerate
or dispose22ofMeridian
materialsRoad,
in accordance
with local, NJ
state
& federal
regulations.
(732)389-5514
Suite 6, Eatontown,
07724
Fax (732)389-6380
SECTION
14: Transport
Information
02/01/15
 Page
3
SECTION
14:
Transport
Information
SECTION 14. TRANSPORT INFORMATION
 UN Number: N/A
SECTION 14: Transport Information
 UN Number:
N/A Name: Non-Hazardous Heat Sink Compound
Proper Shipping
 UN
Number:
N/A Class:
ProperHazard
Shipping
Name:
Non-Hazardous Heat Sink Compound
Transport
Non-Hazardous
UN
ProperHazard
Shipping
Name:
Non-Hazardous
Heat Sink Compound
 Transport
Class:
Non-Hazardous
Environmental
Hazards
(Marine
Pollutant): No
 Transport
Hazard
Class:
Non-Hazardous
Environmental
Hazards
Pollutant): No
in Bulk:
Yes (Marine
Environmental
Hazards
Pollutant): No
 Transport
in Bulk:
Yes (MarineN/A
Special
Transport
Precautions:
Transport
in Bulk:
Yes for DOT,
 Special
Transport
Precautions:
N/ATDG classification, ADR/RID, IMDG, and IATA-DGR
Not a hazardous
material
shipping.
 Special
Transportmaterial
Precautions:
N/ATDG classification, ADR/RID, IMDG, and IATA-DGR
Not
a hazardous
for DOT,
shipping.
 Not a hazardous material for DOT, TDG classification, ADR/RID, IMDG, and IATA-DGR
shipping.
SECTION
15: Regulatory Information
SECTION 15. REGULATORY
INFORMATION






SECTION 15: Regulatory Information
All ingredients are onSECTION
the Toxic Substances
Control Act
(TSCA) Inventory list or are not required to
15: Regulatory
Information
be
If youare
export
this
product,
please ensure
ingredients
meetlist
theor
inventory
listing to
Alllisted.
ingredients
on the
Toxic
Substances
Controlthat
Actthe
(TSCA)
Inventory
are not required
requirement
of the
receiving
company.
be
If you
export
this
product,
please ensure
ingredients
meetlist
theor
inventory
listing to
Alllisted.
ingredients
are
on the
Toxic
Substances
Controlthat
Actthe
(TSCA)
Inventory
are not required
requirement
of the
receiving
company.
be listed. If you
export
this product,
please ensure that the ingredients meet the inventory listing
requirement of the receiving company.
SECTION 16: Other Information
SECTION 16: Other Information
The information herein isSECTION
presented in16:
good
faith and
believed to be accurate as of the revision date
Other
Information
shown
above. However,
warranty,
implied,
is given.
It is theas
buyer’s
The
information
herein isno
presented
in expressed
good faithor
and
believed
to be accurate
of the responsibility
revision date
to
ensure
that its
activities
comply
with
federal,
or
provincial,
shown
above.
However,
warranty,
or
implied,
is given.
Itlocal
is thelaws.
buyer’s
The
information
herein
isno
presented
in expressed
good
faithstate
and
believed
to beand
accurate
as
of the responsibility
revision date
to
ensure
that its
activitiesnocomply
withexpressed
federal, state
or provincial,
andItlocal
shown
above.
However,
warranty,
or implied,
is given.
is thelaws.
buyer’s responsibility
 to
This
MSDS
updated
to conform
to standards
forth by the
Manufacturers
ensure
thathas
itsbeen
activities
comply
with federal,
state orset
provincial,
andChemical
local laws.
Association
as
released
through
the
American
National
Standard
Institute.
(See
ANSI
Z400.1-1993)
 This MSDS has been updated to conform to standards set forth by the Chemical Manufacturers
Part Number(s): 10-8118, 10-8120, 10-8126
Association
through
American
Nationalset
Standard
(See ANSI
Z400.1-1993)
 This
MSDS as
hasreleased
been updated
tothe
conform
to standards
forth byInstitute.
the Chemical
Manufacturers
Association as released through the American National Standard Institute. (See ANSI Z400.1-1993)
Page 4 of 5
1801 Morgan Street
Rockford, IL 61102
Phone: (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com
MSDS Number: 204
Revision Date: 03/14/2014
Supersedes Date: 03/25/2011
MATERIAL SAFETY DATA SHEET
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200
Product Name: HEAT SINK TYPE 44 NON-SILICONE
SECTION 16. DISCLAIMER (OTHER INFORMATION)
GC Electronics believes that the information contained herein is accurate and reliable as of the date of this
material safety data sheet, but no representation guarantee or warranty, express or implied, is made as to the
accuracy, reliability or completeness of the information. Persons receiving information are encouraged to make
their own determination as to the information’s suitability and completeness for their particular application.
NO INFORMATION CONTAINED HEREIN CONSTITUTES A PRODUCT WARRANTY OF ANY KIND, WHETHER
EXPRESS OR IMPLIED; AND ALL IMPLIED WARRANTIES OF MERCHANT ABILITY AND OF FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY GC ELECTRONICS.
Part Number(s): 10-8118, 10-8120, 10-8126
Page 5 of 5