A TEREX BRAND
Technical Specification
BISON 35
Jaw Crusher
BISON 35
HOPPER
Hopper Capacity: 0.6m3 (0.78yd3)
Hopper width at rear: 1.28m (4’ 2.5”)
Hopper length: 1.78m (6’10”)
Hopper loading height: 1.9m (6’ 2¾”)
Belt Width: 0.5m (20”)
Belt Type: Chevron
Variable Speed via throttle valve
JAW CRUSHER
Jaw Width: 480mm (19”)
Jaw Gape: 250mm 10”)
CSS Range: 15mm (5/8”) to 80mm (3 ¼“)
Jaw CSS adjusted directly from Remote Control
Throughput Capacity:
Up to 30tph/33 US tph depending on CSS
PRODUCT CONVEYOR
Discharge Height: 1.1m (3’ 4”)
Belt Width: 400m (16”)
Belt Type: Chevron
POWERUNIT
Engine Type: Isuzu 3CE
Engine Power: 21kW / 28.5Hp
Transmission:
Direct Drive to Crusher via Clutch and V-Belts
Hydraulic Tank Capacity: 50L (13.2 US Gal)
Fuel Tank Capacity: 50L (13.2 Gal)
TRACKS
Track Pitch: 2100mm (6’ 11”)
Shoe width: 300mm (12”)
Track Material: Rubber
Track Speed: Slow Speed: 1.2 Km/hr
Fast Speed:
2.2 Km/hr
GENERAL
Available in both rubber tracked and wheeled
versions
Remote Control as standard for all functions
Paint colour:
Graphite Grey (RAL 7024), Green (RAL 6018), Black
(RAL 9005) – for tracks
TRANSPORT
Track Unit - Length: 4.45m (14’7”)
Width: 1.5m (4’11”)
Height: 2.05m (6’9”)
Wheeled Unit - Length: 5.25m (17’2”)
Width: 1.45m (4’9”)
Height: 2.2m (7’3”)
Machine weight: 3.4mT (7,469lbs)
2046 [6'-9"]
21
1189 [3'-11"]
FIXED DIMENSIONS
300
4533 [14'-10"]
2046 [6'-9"]
1500 [4'-11"]
300 [1']
300 [1']
1450 [4'-9"]
CONTAINER TRANSPORT SUGGESTION
EvoQuip equipment complies with CE requirements.
Please consult EvoQuip if you have any other specific requirements in respect of guarding, noise or vibration levels, dust emissions, or any
other factors relevant to health and safety measures or environmental protection needs. On receipt of specific requests, we will endeavour to
ascertain the need for additional equipment and, if appropriate, quote extra to contract prices.
All reasonable steps have been taken to ensure the accuracy of this publication, however due to a policy of continual product development we
reserve the right to change specifications without notice.
It is the importers’ responsibility to check that all equipment supplied complies with local legislation regulatory requirements.
Plant performance figures given in this brochure are for illustration purposes only and will vary depending upon various factors, including feed
material gradings and characteristics. Information relating to capacity or performance contained within this publication is not intended to be, nor
will be, legally binding.
Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.
EvoQuip is a registered trademark of Terex GB Ltd in the United States of America and many other countries.
200 Coalisland Road
Dungannon
Co. Tyrone
BT714DR
Tel: +44 28 8771 8500
Email: [email protected]
terex.com/EvoQuip
© Terex Corporation 2016
Follow us:
A TEREX BRAND