ELIMINATOR
LP
Dump bodies
& rugby HOISTS
www.rugbymfg.com
Rugby MFG
Page
Built Better The Rugby Way
The Rugby Eliminator LP
The Rugby Eliminator LP is the hardest working dump body in the landscape and light
construction industries. When landscape and construction contractors need a productive,
reliable, and versatile body, they chose the Eliminator LP time after time.
Eliminator
2 - Eliminator LP
3 - Eliminator LP
4 - Stainless Steel LP
5 - Aluminum LP
6 - Eliminator MD
7 - Hoists
8 - Accessories
The steel model features a seamless, one-piece steel floor for optimum strength and
durability. Full 9-foot floor length allows for full sheets of plywood or other materials. The
Eliminator LP design also features front pillars that incorporate forward facing clearance
lights positioned at a 45-degree angle at each corner. Rugby products feature light
locations that may assist the installer in meeting FMVSS/CMVSS 108.
Other industry leading design features include:
•Primarily constructed of 10 ga and 12 ga materials
•Side design includes fully boxed dirt shedding top rail and a sloped bottom rail for
a completely self-cleaning profile
•Double-walled rigid sides with vertical braces
•Single-walled fold down sides with vertical braces
•Pockets for 6" side boards increase load capacity
•Front body’s seamless one-piece design features triple bend top rails for
long-term durability
StandardFeatures
•Stacked understructure consisting of 5" structural long members overlaid with
3" structural I-beam crossmembers nominally spaced 16" (12" optional) apart
•Standard ¼ cabshield with viewing window
•Full height corner posts with rear surface sloped aids in tailgate closing
•Tailgate double walled panel design featuring fully boxed dirt-shedding top and
bottom rails. Two vertical braces to provide additional strength and rigidity
•Standard 10 ga floor
•Board pocket design that aligns with cabshield, allowing the use of tapered side
boards to increase capacity when hauling lighter loads such as brush, firewood,
and mulch.
Cabshield Posts
Full height corner posts include
cut-out for fast installation of
cabshield insert. Makes all
Eliminator LP cabshields
interchangeable, helping to keep
inventory low.
Note: While the addition of a taller side board allows for some additional capacity,
you must follow the maximum weight capacities of your body and hoist.
Carbon steel Rigid 2-3 YARD Body Specifications
Body Length (Inside)
9'3"
11'3"
12'3"
Body Length (Inside)
9'3"
11'3"
12'3"
Body Capacity (cubic yds)
2-3
2-3
2-3
Body Capacity (cubic yds)
2-3
2-3
2-3
Side Height (in)
12
12
12
Side Height (in)
12
12
12
Rear Height (in)
18
18
18
Rear Height (in)
18
18
18
1450
1660
1770
1475
1685
1795
Body Weight (lbs)
2
carbon steel fold down side
2-3 YARD Body Specifications
Body Weight (lbs)
Eliminator LP – Body Options
2-3 & 3-4 Yard Rigid & Fold Down Side Carbon Steel:
•Cabshields (¼, ½, ¾, Full) Standard and Tall
•One-piece floor in 10 ga or 7 ga
•Cross sills on 16" centers (12" optional)
•Understructure Options:
- Stacked
- Crossmemberless
Eliminator lp
Aluminum Side Assemblies available on
2-3 yard & 3-4 yard Fold Down Side models
Fold down sides feature a centrally located quick release
lever that extends and retracts ¾" pins at each end using a
solid linkage member. Weight-saving aluminum fold down
sides are optional on steel bodies.
carbon steel Rigid 3-4 YARD Body Specifications
Rugby’s patented and industry leading EZ-LATCH™
(located on each side of body) allows for easy body
access. The latch system is designed for quick
opening and slam lock operation with a cam action to
draw-in upper tailgate pins.
carbon steel fold down side
3-4 YARD Body Specifications
Body Length (Inside)
9'3"
11'3"
12'3"
Body Length (Inside)
9'3"
11'3"
12'3"
Body Capacity (cubic yds)
3-4
3-4
3-4
Body Capacity (cubic yds)
3-4
3-4
3-4
Side Height (in)
17
17
17
Side Height (in)
17
17
17
Rear Height (in)
23
23
23
Rear Height (in)
23
23
23
1550
1780
1890
1575
1805
1815
Body Weight (lbs)
Body Weight (lbs)
3
stainless
steel
lp
One Tough Choice
Stainless steel dump bodies from
Rugby are corrosion resistant and more
durable than high tensile steel.
The stainless steel Eliminator LP is built
with a one-piece floor, dirt shedding
sides, a centrally located quick release
lever, (fold down side models only) and
the patented EZ-LATCH™ system.
The unit is designed to provide years
of service.
Body Options
Stainless Steel Eliminator LP –
Rigid & Fold Down Sides
•Cabshields (¼, ½, ¾, Full) Standard
and Tall
•Understructure Options:
- Fully Stainless Steel Interlaced
- Crossmemberless
Crossmemberless body has
STAINLESS STEEL Rigid 2-3 yard
Body Specifications
STAINLESS STEEL fold down side
2-3 YARD Body Specifications
Body Length (Inside)
9'3"
11'3"
Body Length (Inside)
9'3"
11'3"
Body Capacity (cubic yds)
2-3
2-3
Body Capacity (cubic yds)
2-3
2-3
Side Height (in)
12
12
Side Height (in)
12
12
Rear Height (in)
18
18
Rear Height (in)
18
18
1450
1660
1475
1685
Body Weight (lbs)
carbon steel AR400 floor and carbon steel longmembers.
Body Weight (lbs)
6° slope tailgate allows easy attachment
of spreaders during winter.
•10 ga 201 2B stainless steel sides and
ends standard
•8" Longsills
STAINLESS STEEL Rigid 3-4 yard
Body Specifications
Body Length (Inside)
9'3"
11'3"
Body Length (Inside)
9'3"
11'3"
Body Capacity (cubic yds)
3-4
3-4
Body Capacity (cubic yds)
3-4
3-4
Side Height (in)
17
17
Side Height (in)
17
17
Rear Height (in)
23
23
Rear Height (in)
23
23
1550
1780
1575
1805
Body Weight (lbs)
4
STAINLESS STEEL fold down side
3-4 YARD Body Specifications
Body Weight (lbs)
•One-piece 3⁄16" AR400
crossmemberless steel floor
•Pockets for 6" side boards increase
load capacity
Aluminum
lp
Hard Working & Good Looking
Tough, efficient Rugby aluminum
Eliminator LP bodies weigh up to 50%
less than traditional carbon steel and
provide an exceptional strength to
weight ratio! This means increased
payload, improved fuel efficiency, and
corrosion resistance, in addition to
lower maintenance costs and lower tire
and brake costs.
The aluminum Eliminator LP body also
features lightweight fold-down sides
for easy access. Enjoy long lasting,
durable aluminum bodies from Rugby
and customize with a wide range
of performance and appearance
enhancing accessories.
Body Options
Aluminum LP – All Models
•Cabshields (¼, ½) Standard and Tall
•Standard Interlaced Understructure
• Constructed of 1⁄8", 3⁄16", and 1⁄4" 5052 aluminum
• Pockets for 6" boards increase load capacity
• Long members constructed of 8" formed
¼" 5052 aluminum
Fold down aluminum sides are
lightweight and easy to operate.
Rigid 2-3 YARD Body Specifications
fold down side 2-3 YARD Body Specifications
Body Length (Inside)
9'3"
11'3"
Body Length (Inside)
9'3"
11'3"
Body Capacity (cubic yds)
2-3
2-3
Body Capacity (cubic yds)
2-3
2-3
Side Height (in)
12
12
Side Height (in)
12
12
Rear Height (in)
18
18
Rear Height (in)
18
18
Body Weight (lbs)
813
915
Body Weight (lbs)
830
935
Rigid 3-4 YARD Body Specifications
fold down side 3-4 YARD Body Specifications
Body Length (Inside)
9'3"
11'3"
Body Length (Inside)
9'3"
11'3"
Body Capacity (cubic yds)
3-4
3-4
Body Capacity (cubic yds)
3-4
3-4
Side Height (in)
17
17
Side Height (in)
17
17
Rear Height (in)
23
23
Rear Height (in)
23
23
Body Weight (lbs)
867
980
Body Weight (lbs)
875
985
5
Eliminator
md
Even More Capable
Incorporating the great look and
dependable performance of the
Rugby Eliminator LP, the Eliminator MD
increases productivity by combining
side and rear dump capabilities.
Operators enjoy pinpoint load
placement and greater functionality in
tight jobsites with the Eliminator MD.
Body Options
Eliminator MD
•Cabshields (¼) Standard and Tall
Dumping direction is easily controlled with one lever and Rugby’s
standard tailgate release controls both the rear and the side
release. The Eliminator MD includes Rugby’s patented
EZ-LATCH™. Standard vertical side and tailgate braces along with
the Eliminator’s sleek design offer the complete package to make
your work truck stand out!
Increase productivity by combining side and rear dump capabilities
with the Eliminator MD.
• 10 ga steel ends and 7 ga steel floor
• 12 ga fold down passenger side
• 7 ga dump thru driver’s side
• 55° side dump angle; 46° rear dump angle
ELIMINATOR MD SPECIFICATIONS
Multi-Directional dumping hoist specifically
designed for the Eliminator MD body.
6
Body Length
9'
9'
11'
11'
Body Capacity (yds)
2-3
3-4
2-3
3-4
10.9/9.6
10.9/9.6
8.6/9.6
8.6/9.6
Side Height
12.5"
17"
12.5"
17"
Tailgate Height
18.5"
23"
18.5"
23"
Hoist Capacity
Rear/Side (Tons)
HOISTS
Need a Lift
HOIST SPECIFICATION
SR-4016
HR550
40
40
Cyl. Bore & Stroke
5.5" x 16"
5.5" x 20"
Chrome Cyl. Shaft
2"
2 1⁄2"
Operating Pressure (psi)
3200
3200
Hoist Weight w/subframe (lbs)
460
650
7.7 - 17 tons
8 - 16 tons
NTEA Class
Subframe
Rugby designs and manufactures more hoists
than anyone in the world. Rugby hoists are built
for optimum performance and are factory tested
for performance and durability. If you need a
dependable long-lasting hoist, you need a Rugby!
Hoist Capacity Ranges
With over 45 years of experience, Rugby® is the industry leader in
hoist design and testing. The new Rugby SR-4016 truck hoist is tested
at full-rated capacity for an extended life cycle*, and with a new
integrated body prop, the SR-4016 will reduce the installation time in
your shop by at least 10-15%! The new SR-4016 can be used for both
HR520 and HR540 applications, reducing your inventory!
•Available with single or double acting electric pump or
direct mount gear pump
• Mounting height: 9.6 inches
*Test results assume all recommended maintenance is adhered to.
7
accessories
A Complete Line Up
Tailgate Bumpers
Pintle and Receiver Hitch Plates
Coal Chutes
Two Rung Ladder
Other Accessories Available:
• Spreader Aprons
• LED Lights
Rugby products feature light locations that may assist the installer in meeting FMVSS / CMVSS 108.
Rugby Manufacturing is the world’s leading designer and manufacturer of Class 3-5 dump bodies, landscape bodies, platforms, hoists
and related truck equipment & accessories. With more than 4 decades of experience, Rugby dump bodies and hoists are precision
engineered and manufactured to perform! Rugby is committed to delivering product design innovation, superior quality and unrivaled
service. And with each body and hoist backed by a 3-year warranty, nothing compares to Rugby!
Commitment to Quality
Today’s marketplace demands quality products and competitive pricing. We work hard at Rugby
to comply with your needs. Our reputation since 1969 has been one of quality production and we
won’t change. You deserve and demand what we are committed to, the best.
RUGBY Manufacturing
Rugby, ND • 701-776-5722 • FAX 701-776-6235
www.rugbymfg.com • E-mail [email protected]
Sold by:
©2016 Truck Bodies & Equipment International, Inc.
Printed in USA
Visit Our Parts & Accessories Web site
www.tbeidumpbodyparts.com