AGILENT FILM HOLDER ACCESSORY
SS
SORY
FOR THE CARY 100/300/4000/5000/6000i
/55000/60000i
UV-VIS-NIR SPECTROPHOTOMETERS
METERS
Automated multi-filter and film homogeniety
niety measurements
The Agilent film holder accessory can be used to test the
homogeneity of a sample, as it scans across the sample, measuring
the %T or Abs as a function of distance. It is a versatile accessory,
designed for use with the Agilent sample transport accessory.
The film holder accessory provides a vertical mounting capability
for films, gels, sheets of material or multiple filters, allowing
photometric measurements across the sample, so a plot of
photometric mode (A, %T) versus position along the sample can
be easily generated. The film holder accessory is equipped with
a wide variety of mounting options, with the large number of
mounting holes providing flexibility in sample size.
For more information:
www.agilent.com/chem
Applications
The film holder accessory can be used to perform many
measurements, and is particularly useful where intraand inter-sample variability is of interest.
Sample
Photographic film
Bandpass filters
Optical components
Example measurement
Intra-sample homogeneity
Inter-sample variability
Defect rates
Specifications
Instrument
Wavelength range
Maximum sample
size
Schematic of accessory showing direct transmission (green) of incident light (black)
Additional Accessories
Cary 100/300/4000/5000/6000i
Equal to host instrument
Cary 4000/5000/6000i:
160 x 160 mm
Cary 100/300: 90 x 100 mm
Required
Optional
Extended sample compartment,
Sample transport accessory
None
For more information:
www.agilent.com/chem
Agilent Products are for Research Use Only.
Not for use in diagnostic procedures.
Information, descriptions and specifications in this
publication are subject to change without notice.
© Agilent Technologies, Inc. 2013
Published in USA, April 1, 2013
5991-1718EN