JENNY LIND
BOOKCASE
COMPONENTS
4 - feet
1 - top shelf
2 - shelf panels
Thank you for purchasing the Jenny Lind Bookcase.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
2 - long
front
spindles
4 - short
front
spindles
2 - long
back
spindles
4 - short
back
spindles
1 - bottom
panel
4 - long side
posts
Note: 2 people are required to safely assemble this product.
!
WARNING: Adult Assembly Required
3 - back
crossbars
8 - short side
posts
short front
spindle
short front
spindle
top shelf
B
A
back crossbar
short side
post
NOTE: Make sure holes
of short back spindles
are facing each other
during assembly
1
B
A
B
short dowel of
back crossbar
short back
spindle
A) Fit dowels of 2 short front spindles and 2
short back spindles into corresponding holes
of top shelf as shown. Press firmly to secure.
B) Insert 4 short side posts into top shelf as
shown.
Made in Vietnam - r02
A
2
A
long dowel of
back crossbar
A) Fit long dowel of back crossbar into corresponding hole of short back spindle as shown.
B) Gently pull spindles outward to allow enough
space to fit the short dowel of the back crossbar into the corresponding hole of remaining
short back spindle.
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
Page 1 of 4
JENNY LIND
BOOKCASE
NOTE: Make sure dowel of each
spindle is securely fitted into
corresponding spindle and shelf
during assembly
shelf panel
short front
spindle
B
back crossbar
short side
post
B
A
short back
spindle
NOTE: Make sure holes
of short back spindles
are facing each other
during assembly
3
A) Align holes of shelf panel with spindles of
assembly and attach with 2 short front spindles
and 2 short back spindles as shown.
B) Insert 4 short side posts into shelf panel as
shown.
long front
spindle
B
short dowel of
back crossbar
NOTE: Make sure holes
of long back spindles
are facing each other
during assembly
5
4
shelf panel
back crossbar
A
A
long back
spindle
A) Align holes of remaining shelf panel with
spindles of assembly and attach 2 long front
spindles and 2 long back spindles as shown.
B) Insert 4 long side posts into shelf panel as
shown.
Made in Vietnam - r01
A
long dowel of
back crossbar
A) Fit long dowel of back crossbar into corresponding hole of short back spindle as shown.
B) Gently pull spindles outward to allow enough
space to fit the short dowel of the back crossbar into the corresponding hole of remaining
short back spindle.
B
side
B long
post
A
B
short dowel of
back crossbar
6
A
long dowel of
back crossbar
A) Fit long dowel of back crossbar into corresponding hole of long back spindle as shown.
B) Gently pull spindles outward to allow enough
space to fit the short dowel of the back crossbar into the corresponding hole of remaining
long back spindle.
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
Page 2 of 4
JENNY LIND
BOOKCASE
NOTE: Make sure dowel of
each foot is securely fitted into
corresponding spindle and
bottom panel during assembly
foot
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished
with a protective clear lacquer.
bottom
panel
7
Align holes of bottom panel with spindles of
assembly and attach with 4 feet as shown. With
the assistance of another adult, position unit
upright.
Assembly is now complete.
Made in Vietnam - r02
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
Page 3 of 4
JENNY LIND
BOOKCASE
! WARNING
Serious or fatal crushing injuries can occur from furniture
tip-over. Use of tip-over restraints may only reduce, but
not eliminate, the risk of tip-over. To help prevent tip-over,
install tip restraint per instructions below.
MOUNTING HARDWARE
C
mounting
bracket
C
screw
B
4 - plastic
anchors
2 - wall straps
4 - screws
plastic
anchor
2 - mounting
brackets
Missing hardware? Please call 800.933.9904
for replacements. NOTE: Contains small
parts. Keep away from small children.
F wall
strap
TOOLS REQUIRED
phillips head screwdriver
power drill
(for pilot holes only)
WALL MOUNTING ASSEMBLY
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible. The following instructions are for drywall mounting only.
A) Determine the final location of unit. Mark each position on the wall for 2 mounting brackets.
B) Drill 4 pilot holes into marked positions on the wall and into a wall stud. If the wall stud is not available, drill a hole in the
wall that is slightly smaller in diameter than the plastic anchor. Gently tap 4 plastic anchors until the flange of each anchor is
flush with the wall.
C) Attach 2 mounting brackets to the wall with 2 screws per bracket as shown. Using a screwdriver, make sure the
screws are secured through the mounting bracket and into the plastic anchor in the wall.
E) With the assistance of another adult, align back uprights of unit with the mounting brackets on the wall.
F) Attach 2 wall straps to corresponding mounting bracket and back upright as shown. Lace one end of the wall strap
through bracket and into the other end of the strap. Pull tightly on the wall strap to secure.
Wall mounting assembly is now complete.
Made in Vietnam - r02
Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com
Page 4 of 4