Collator tb flex B 325 VP 4065, year of manufacture 2008, with
stitcher-folder-trimmer tb 304 QSM 7061, year of manufacture 2009
Collator tb flex B 325 VP 4065, YOM 2008
station no.:
25
pile:
variable pile up to 30 cm
format:
max. 35 x 50 cm, min. 10,5 x 15 cm
paper weights:
20 up to 1000 g/m²
speed:
synchronization 1:1 up to 2900 cycles/h
synchronization 1:2 up to 4200 cycles/h
operation:
via touch screen, Siemens program control
controls:
missed and double sheet detector ultrasound, each station, self adjusting
paper jam detector
current:
standard 400 V, 50 Hz, 3/N/PE
additional equipment:
 automatic adjustment of the conveyor belts via touch screen
 side blast air unit, individually adjustable
 synchronization sucker : conveyer belts = 1 : 2, for higher output
 ejector, faulty sets are ejected during the run
 jogger
Stitcher-folder-trimmer tb 304 QSM 7061, YOM 2009
motor quick adjustment of format „Quick Set motor”
open formats:
max. 35 x 50 cm, min. 6.5 x 15.5 cm,
with head-foot trim
11.1 x 15.5 cm
smallest brochure:
6.5 cm spine length x 4 cm,
with head-foot trim
10.5 cm spine length x 4 cm
speed:
up to 4200 cycles/h, format- and paper depending
current:
standard 400 V, 50 Hz, 3/N/PE
operation:
stitching:
folding:
3 knife trimming:
delivery:
three lined display with function keys
2 small stitching heads for normal staples up to 5 mm Hohner Universal,
complete with clinching unit and wire, automatic adjustment to booklet thickness,
cross adjustment of staples to fold, staple detection
friction-free knife fold with automatic layer height adjustment and brochure press
for approx. 120 pages normal paper, 80 g/m²
fore-edge trimming with upper and lower knife, incl. air pressured waste removal,
necessary for the trimming to 4 cm and for cut bigger than 1,5 cm, infinitely variable
motor format adjustment of the fore-edge trimming with additional hand wheel for fine
adjustment, head and foot trim of 3 up to 20 mm each for approx. 120 pages normal
paper, 80 g/m², with upper and lower knife paper waste box. The head and foot trim
can be switched to transport without trim, then formats as with 303 are reached.
scale delivery with double side electric driven material infeed and infinitely adjustable
scale spacing
additional equipment:
 press fold with motor adjustment
 preselection counter with booklet separator
 unspool unit for 15 kg wire rolls
Prices on request