The only limit
is your imagination!
A builder says…
“The Clydesdale’s a great tool for builders –
I used them every day on the job!”
“I used The Clydesdale to help me build a high-end Victorian home. I used
them every day for over a year. I can tell you from my own experience, The
Clydesdale is strong and versatile. I set them up as sawhorses, work tables,
job site picnic tables, and more.
Cheap sawhorses collapse when you get too much weight on them. The
Clydesdale handles anything. Itʼs a great design and a great tool!”
— Dave Sundberg, Sundberg Construction,
Garberville, CA
“The Clydesdale will handle anything.”
OWNERS MANUAL
How to create
INSTANT JOB SITE SET-UPS for
DOZENS OF CONSTRUCTION TASKS!
Special Notice about SAFETY
Every tool is only as safe as the person using it. Your safety is specifically YOUR RESPONSIBILITY — see Warranty. We urge you to use
good sense when using The Clydesdale and always put safety first.
• Use only #2 Douglas Fir or better lumber with The Clydesdale.
• Avoid lumber thatʼs twisted, cupped, split, or has knots.
• “Kick out” The Clydesdaleʼs legs to be sure Pinch Points secure lumber in the Pockets and Slots.
• Use extreme caution when The Clydesdale is set up as an elevated
work platform – we strongly recommend the use of safety railings.
11679 Mae Lane, Redding, CA 96003
Stephens Construction
www.The-Clydesdale.com
TOLL FREE 1-877-MY-CLYDESDALE
(1-877-692-5933)
Dear Friend,
Thank you for purchasing The Clydesdale™
Work Platform. This tool has revolutionized
the way I handle dozens of job site set-ups
and I know it will do the same for you.
Read this Owners Manual carefully, then put The
Clydesdale to work. And please do me two favors: write
and tell me what you think, and tell your friends about
The Clydesdale!
Sincerely,
Thanks and WELCOME to The Clydesdale!
Scott Stephens, Owner, Stephens Construction
Here’s how to GET MAXIMUM UTILITY from
THE WORLD’S MOST VERSATILE JOB SITE WORK PLATFORM!
The Clydesdale’s SECRET is 20 SLOTS & POCKETS
Add 2 x 12ʼs in the
diagonal slots to
make handy Vshaped shelving.
Supply Trough
Lean 2 x 4ʼs
upright with The
Clydesdale a couple of feet off the
ground. Length of
2 x 4ʼs and height
of The Clydesdale
will vary to fit your
application.
Staging
20 pockets & slots
are sized to take
any dimensional
lumber from 2 x 4’s
to 2 x 12s.
Self-locking pinch
points secure your set
up with no fasteners
or hardware.
Simply slide lumber into
the slots – hundreds of
combinations are
possible.
Use 2 x 4ʼs to
make the worldʼs
toughest sawhorses.
Use top slots to
create a tabletop
of 2-by material.
Add a 2 x 12
bench seat.
Light Duty
Work Table
Offloading Platforms &
Tailgate Extenders
Sawhorse
Slide in 2 x 4ʼs to
create a table
base then add a
sheet of plywood.
Heavy Duty
Work Bench
Slide in 2 x 4ʼs
then add 2 x 12ʼs to create an extremely
rugged bench.
Break Tables
Lower your tailgate and create
a platform to
hold plywood,
sheet rock, etc. for easy unloading and
easy access.
Horizontal
Shelving
Use horizontal
slots for horizontal shelving.
Light
Duty
Ramps
Make a
basic table
with 2 x 4ʼs
and add 2 x
10ʼs or 2 x
12ʼs to make light ramps.
Heavy
Duty
Ramps
Make a basic
table and add
2 x 10ʼs or 12ʼs. Lay a sheet of plywood
on top. Make extra-long ramps with The
Clydesdale as a mid-point support.
Let the ends of your
2 x 4ʼs extend beyond
The Clydesdale and
you have handy tool
hooks and hangers.
Tool Hooks & Hangers
Elevated
Work
Platforms
Lean 2 x 4ʼs
against the
structure and
raise The
Clydesdale off
the ground.
Add safety railings and 2-by material to stand on.
See SAFETY NOTICE on back of this
Owners Manual.
Double
Height
Platforms
Stack two
Clydesdales
head-to-head to
create a work
platform thatʼs
twice as high.
Use safety
railings. See
SAFETY NOTICE
on back of this
Owners Manual.
Use The Clydesdaleʼs slots and pockets
to create dozens more job site set ups.
The only limit is your imagination!
Dozens more set ups