Poster_Sensoren_en_V03.qxp
05.04.2011
11:22 Uhr
Seite 1
Sensors and vision systems from Festo
Excellent process reliability, optimum performance and
maximum reliability:
The new and comprehensive portfolio of sensors brings
together these important core values and facilitates troublefree and efficient manufacturing processes.
factor 1 technology. From colour sensors to monitoring
smooth running; and yet they are very competitively
priced.
Many sensors offer the best technically feasible and practical solutions. From the world's smallest inductive sensor to
These products are naturally fully coordinated with
products and services from Festo.
Proximity sensors, position transmitters and connection technology
This range began with a proximity switch in Festo’s portfolio
of sensors which was optimally coordinated for use with
pneumatic drives. New variants and completely new functionalities were created on the basis of this stable and successful
platform. The analogue position transmitter was a logical
development.
With connectivity in mind, the NEBU modular system for connecting cables provides excellent connections for the SVE4
signal converters for example – and in the case of the NEBU
system, this even extends to all sensor types from Festo and
more besides.
Proximity sensors SMT-8M and SME-8M
for T-slots
Position detection for pneumatic
cylinders in drive technology.
Position transmitter: Continuous position detection with
analogue value output
Proximity sensors SMT-10M
and SME-10M for rounded slots
Position detection from pneumatic
cylinders in drive technology.
Position transmitters SMAT
Continuous position/location detection
using analogue signals for process monitoring, object identification and recording. For example: Identification of
“go”/“no go” parts, quality inspection,
Clamping, ultrasonic welding and wear
monitoring.
• Switch outputs: PNP, NPN, contacting
• Switching element function:
NO, NC, Namur
• Operating voltage up to 250 V AC/DC
• Electrical connection: M5, M8, M12,
open at one end
• Switch outputs: PNP, NPN, contacting
• Switching element function:
Normally open contact
• Operating voltage up to 30 V AC/DC
• Electrical connection: M8, M12,
open at one end
Pressure and vacuum switches SDE5
For low-cost, simple and fast compressed
air, regulation and vacuum detection and
object detection via back pressure.
Pressure and vacuum sensors SDE3
The space-optimised pressure sensor
SDE3 is positioned between the highfunctionality pressure sensor SDE1 and
the price-optimised pressure switch SDE5.
Pressure and vacuum sensors SDE1
All pressure values are continuously
under control with the SDE1 modular
system for pressure measurement, pressure monitoring and pressure sensing.
• 2-colour LCD display
• Alphanumeric and bargraph pressure
indicator
• Measured variables:
Relative and differential pressure
• Operating voltage: 15 ... 30 V
• Switch output: PNP, NPN
• Operating medium: Filtered compressed
air, lubricated or unlubricated
• Pressure ranges: -1 ... +10 bar
• Accuracy: 2 %
• Illuminated LCD display
• Measured variables:
Relative and differential pressure
• Operating voltage: 15 ... 30 V
• Switch output: PNP, NPN
• Analogue output: 0 ... 10 V, 4 ... 200 mA
• Operating medium: Filtered compressed
air, lubricated or unlubricated
• Pressure ranges: -1 ... +10 bar
• Accuracy: 2 %
Flow sensors and transmitters
SFE3/SFET
Suitable for applications in the electronics, light assembly, optical and pharmaceutical industries.
Flow sensors SFAM
This high-flow sensor can operate either
as a standalone unit or ideally, combined
with MS series service units.
Proximity sensor: Binary position detection on the drive
• For all profile slot cylinders
• Position measuring range: 50 mm
• Analogue output:
0 ... 10 V, 0 ... 20 mA
• Operating voltage: 15 ... 30 V
• Electrical connection: M8
NEBU sensor cables
A modular system offering four specific
cable qualities:
- Basic mainly for static applications
- Standard for normal applications
- Drag chain for enhanced reverse
bending stress requirements
- Robotic applications with torsional
requirements
• Coordinated with all Festo sensor types
• M5, M8 and M12 connection technology
• Line lengths from 0.1 to 30 m,
configurable
• Additional types of support available
• Protection class IP65, IP68
Signal converters SVE4
Anywhere where analogue signals have
to be converted into digital signals.
• Signal range: 0 ... 10 V, 0 ... 20 mA
• Setting options: Teach-in
• Switch outputs: 2x PNP or 2x NPN
• Selectable switching element functions
• Freely programmable switching function
• Electrical connection: M8
• Ambient temperature: -20 ... +70 °C
• Protection class: IP65
Pressure and vacuum sensors
Efficient and reliable pressure and vacuum monitoring and
control combined with flow monitoring are of the utmost importance when pneumatic systems are used for automation.
They broaden the range for which systems can be used, offer
more safety and also provide the option of remote maintenance and monitoring. Quick and simple to operate thanks
to the uniform control and display concept utilised with all
of Festo’s pressure sensors.
Check to ascertain that an item is in position using the
pressure and vacuum switch SDE5
The pressure sensor SDE1 is integrated into a service unit
and monitors the pressure range of a pulsed air motor.
• With operating status indicator
• Measured variable: Relative pressure
• Operating voltage: 15 ... 30 V
• Switch output: PNP/NPN
• Switching element function:
NO contact, NC contact, switchable
• Analogue output 0 ... 10 V
• Operating medium: Filtered compressed
air, lubricated or unlubricated
• Pressure ranges: -1 ... +10 bar
• Threshold value and window comparator function
Pressure sensors SDET
Monitors the pressure of different types
of gaseous and liquid media – for example, for the process industry, automation
technology, the automotive sector and
the food-processing industry.
• Measured variable: Relative pressure
• Operating voltage: 14 ... 30 V
• Analogue output: 0.1 ... 10 V, 4 ... 20 mA
• Pressure ranges: -1 ... +100 bar
• Accuracy: 1 %
SPAB pressure and vacuum sensor
The compact SPAB is distinguished by
unequivocal read-outs: Colour switching
status displays allow for clear-cut ascertainment of system statuses, and all
values can be easily read from the twopart display. And time is saved as well
with the data copying function.
• Pressure supply ports with GPT, NPT
and RPT thread
• Measuring ranges: -1 to 1/0 to 10 bar
• Electrical connection: M8 or cable
• Analogue and digital outputs
• Freely selectable units of measures
for pressure
• Optional: Adapter plate for connections in confined installation spaces
Flow sensors
Flow monitoring provides simpler diagnostic and condition
monitoring processes: A change in the flow rates is often an
indicator that problems are likely to occur. Areas of application: Detection of very small particles, acceptance inspec-
Plastic bottle
tions of components with sensitive surfaces, acceptance
records, functional monitoring, leak testing, checking to
ascertain that an item is in position.
Flow sensors SFAB
For leak detection, leak testing of end
products, flow monitoring of parts feeding – including diagnosis.
Air motor
(with pulsation)
Buffer
Storage container
SFE3
SFAB
Constant pressure
Quality control using the SFE3 flow sensor
Flow
A flow sensor for functional monitoring
of an air motor SFAB
• Attractive display and operating
concept
• Display can be rotated 360°
• Measured variables:
Flow rate consumption
• Flow measuring ranges:
0.1 ... 1000 l/min
• Measurement dynamic range 1:100
• Switch outputs: 2x PNP, 2x NPN
• Freely programmable switching function
• Analogue output: 0 ... 10 V, 4 ... 20 mA
• Operating pressure: 0 ... 10 bar
• Operating medium: Compressed air,
nitrogen
• Digital display
• Measured variable: Flow rate
• SFE3: 0.05 ... 50 l/min
SFET: 0.05 ... 50 l/min
• Switch outputs: 2x PNP, 2x NPN
• Freely programmable switching function
• Analogue output: 1 ... 5 V
• Operating pressure: -0.9 ... +7 bar
• Operating medium: Compressed air,
nitrogen
• Large backlit digital display
• Measured variables:
Flow rate consumption
• Convenient switching-point adjustment
• Flow measuring ranges:
10 ... 5,000 l/min
• Measurement dynamic range 1:100
• Switch outputs: 2x PNP, 2x NPN
• Freely programmable switching function
• Analogue output: 0 ... 10 V, 4 ... 20 mA
• Operating pressure: 0 ... 16 bar
• Operating medium: Compressed air,
nitrogen
Inductive sensors
With sensors in the SIE… series the focus is on metals.
These start with detection and even distance measurement
of metal objects.
Sensors SIEN
Types: 4, M5, 6.5, M8, M12, M18, M30
Example: SIEN...-M5
For the detection of metal objects. Area
of application: automation technology,
packaging industry, food industry, and to
some extent the chemicals industry.
Detecting large distances: inductive proximity sensors
SIEF-Q40
Position detection with the analogue inductive sensor SIEA
• Housing types:
- High-alloy stainless steel
- Nickel-plated brass
- Polyamide, reinforced
• Switching distance: up to 15 mm
• Switch outputs: PNP, NPN
• Switching element function:
NC/NO
• Switching frequency: Up to 3000 Hz
• Electrical connection: M8, M12, cables
• Polyamide housing in M12, M18, M30
versions
• Operating voltage range: 10 ... 34 V
• Protection class: IP65/IP67
Sensors SIEH-CR
Types: M12, M18, M30
Higher resistance to all gases and media
that attack materials other than stainless
steel – thanks to the fully enclosed design of the stainless steel housing. Areas
of application: Tough physical environment, in the automotive, chemical and
food industries.
• Switching distance: up to 20 mm
• Switch outputs: PNP, NPN
• Switching element function: Normally
open contact
• Switching frequency: Flush mounting
200 ... 400 Hz
• Electrical connection: M12, cables
• Operating voltage range: 10 ... 30 V
• Housing: High-alloy steel
• Protection class: IP65/IP67
Sensors SIEF
Types: M8, M12, M18, M30
These are unaffected by interference produced by strong magnetic fields (AC and
DC) – e.g. with electrical welding, or in
areas where lifts, smelting furnaces, etc.
are installed.
• With reduction factor 1 for all metals
• Up to 250 % faster than conventional
proximity switches
• Switching distance: up to 20 mm
• Switch outputs: PNP, NPN
• Switching element function: Normally
open contact
• Switching frequency: Up to 3000 Hz
• Electrical connection: M8, M12, cables
• Housing:
- Brass, chrome-plated, polybutylene
terephthalate
- Brass, PFTE-coated, polybutylene
terephthalate
• Protection class: IP67
Sensors SIEA
Types: M8, M12, M18, M30
Measurement, monitoring and control
tasks: SIEA sensors with a distance proportional analogue signal, combine voltage and current signals into one single signal. Ideal for monitoring.
• Position measuring range: up to 20 mm
• Analogue output: 0 ... 10 V, 4 ... 20 mA
• Broadband: 200 ... 1600 Hz
• Electrical connection: M8, M12
• Operating voltage range: 15 ... 30 V
• Housing: Brass, chrome-plated
• Protection class: IP67
Inductive proximity sensor SIES-8M
Ideal for sensing intermediate and endpositions at electrical drives. The only
inductive sensor for type 8 slots with
patented status display by means of two
yellow LEDs.
• Time tested mounting technology
analogous to cylinder sensors
• Simple positioning and screw
mounting thanks to new central mount
• Ideal visibility thanks to 2 LEDs
• Repetition accuracy: ≤ ±0.05 mm
(radial)
• Supply power: 10 to 30 V
• Switching distance: 1.5 mm
• Per EN 60947
• Flush mounting
• Operating temperature: -25 to 70° C
Optical sensors
Thanks to the optical measuring process in the SOE…sensor
range, they are capable of performing a wide variety of tasks.
From colour recognition and the detection of very small particles to a distance sensor using laser light.
Sensors SOEG-...-M12/M18, M18W
Ideally suited for larger distances. They
recognise both large and small objects
in all colours.
Diffuse sensor with background suppression:
Detection of objects independent of the colour and surface
Detection of the presence of an item in automation
technology
• Diffuse sensors,
retro-reflective sensors,
through-beam sensors,
diffuse sensors with background
suppression
• Light type: Infrared, red (polarised)
• Max. operating range:
120 ... 20,000 mm
• Electrical connection: M12, cables
• Max. switching frequency:
250 ... 1000 Hz
• Setting options: Potentiometer
• Protection class: IP65/IP67
Sensors SOE..-...-Q20
Very small but extremely accurate: For
dynamic process assimilation via the
“teach-in” function. Optimal for cramped
installation conditions.
• Very convenient to operate
• (Laser) diffuse sensors,
retro-reflective sensors,
through-beam sensors,
fibre-optic units
• Variants: With background suppression, for measuring distances, for
transparent objects
• Light type (polarised): Red, red laser
• Max. operating range: 80 ... 6,000 mm
• Electrical connection: M8
• Max. switching frequency:
200 ... 4000 Hz
• Setting options: Teach-in
• Protection class: IP67
Sensors SOE..-...-Q50
The SOE-..-Q50 features a scaling
potentiometer, digital scaling with a
switching frequency of up to 2500 Hz.
SOEC-RT-Q50 – the world's smallest
colour sensor. Integrated white light
source, switching frequency 500 Hz,
including three independent channels
with teach-in capability.
• (Laser) diffuse sensors,
retro-reflective sensors,
through-beam sensors,
distance and colour sensors,
diffuse sensors with background
suppression
• Max. operating range: 15,000 mm
• Electrical connection: M12, cable
• Max. switching frequency:
500 ... 2500 Hz
• Protection class: IP65/IP67
Fibre optic cable and fibre-optic
units SOE4
The high precision, variable solution.
Saves space as well for position detection of small parts, at large distances
or in high temperature ranges.
Light barrier sensor SOOF
Easy to install and adjust because the
emitter and the receiver are in a single
housing. Traditional metal version or
innovative polymer variant with a status
display which is visible from all sides.
• Easy adjustment via teach-in
• Detection of very small objects
• Offers various fibre optic functions
and cable types in a single concept
• 3 types of fibre optics: without
display, with display, or display plus
analogue output
• Highly precise (12-bit converter)
• Protection
- Fibre optic cable: IP66
- Fibre-optic unit: IP64
• IP67 protection
• Fork widths: 30, 50, 80 and 120 mm
• Numerous mounting types
• Good visibility thanks to red light
• Adjustment by means of teach-in
(SOOF-P) or potentiometer (SOOF-M)
• Accurate, with high resolution and
repetition accuracy
Compact vision systems
Pure economy: Innovative and intelligent vision systems.
Versatile to use and simple to integrate thanks to its
compact, industrial-grade design and the clearly defined
interfaces.
Festo AG & Co. KG
135153 en 2011/02
Vision system SBOC-M/SBOI-M
Designed to support diagnostics and
commissioning as well as function
monitoring for fast motion sequences.
The innovative and low-cost alternative
to conventional high-speed cameras.
For high-speed monitoring:
The intelligent Compact Vision System SBOx-M
For type, position and orientation detection:
The intelligent Compact Vision System SBOx-Q
• Integrated electronics to record and
save films
• Several cameras can be networked
via Ethernet and synchronised
• Lens mounting: Integrated optics or
C-mount
• Operating distance: 22 ... 1000 mm
or depending on the lens selected
• Field of view: 14 x 10 ... 520 x 390 mm
or depending on the lens selected
• Sensor resolution: 640 x 480 pixels
• Frame rate: 185 ... 2000 fps
• Protection class: IP65/IP67
Vision system SBOC-Q/SBOI-Q
Intelligent vision system for accurate
positioning of axes, type identification,
position detection and 2D quality inspection of moving parts and parts at rest.
Plus: recognition of OCR and reading of
1/2D codes.
• Sensor resolutions: 640 x 480,
752 x 480 or 1280 x 1024 pixels
(monochrome and colour)
• Standard software interfaces via
Ethernet and integrated 24 V I/O
• Integrated PLC runtime system
(CoDeSys 2.3)
• CANopen master functionality
in conjunction with CoDeSys
• Lens mount: fixed lens or C-mount
• Compact dimensions, low weight
• Protection class: IP65/IP67
P.O. Box
73726 Esslingen
Ruiter Strasse 82
73734 Esslingen
Germany
Phone +49/711/347-0
Fax +49/711/347-21 44
[email protected]
www.festo.com