US_L_07_Cond_038_049.qxd
01.02.2005
19:27 Uhr
Seite 38
Conductivity
Conductivity
Conductivity Meters
Meters
Conductivity
Conductivity is a parameter used to
measure the ionic concentration and
activity of a solution. The more salt,
acid or alkali in a solution, the greater
its conductivity. The unit of conductivity is S/m, often also S/cm. The scale for
aqueous solutions begins with pure
water at a conductivity of 0.05 µS/cm
(77 °F / 25°C). Naturally occurring
waters such as drinking water or surface
water have a conductivity in the range
100 – 1000 µS/cm. At the upper end of
the chart some acids and alcalines can
be found.
Conductivity of aqueous solutions
µS/cm
0,1
mS/cm
1
10
100
1
10
100
1000
Feedwater for high-pressure boilers
Fully deionized water (ion exchanger)
Deionized water
Drinking water
Wastewater
Surface water
Brackish water, sea water
Conductivity measurements are used
for applications such as in the production of ultrapure water or determining
the salinity of sea water.
Industrial process water
Concentrated acids and bases
Conductivity is measured by making a measurement of the electrical resistance.
The simplest kind of measuring cell used consists of two similar electrodes. An
alternating voltage applied to one of the electrodes causes the ions in the solution
to migrate towards the electrodes. The more ions in the solution, the greater the
current which flows between the electrodes. The instrument measures the current
and uses Ohm's law to calculate first the conductance of the solution and then –
by taken the cell data into account – the conductivity.
38
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
Cond
Cond 315i
Cond 330i
Cond 340i
–
●
●
–
●
–
●
–
–
●
●
●
●
●
●
●
●
●
●
●
●
●
–
–
●
–
–
–
–
–
–
●
●
–
●
●
●
❍
–
AQA with documentation
–
R&D hidh precision
–
Control measurements
–
LIMS connection
–
Quality assurance
–
Training
●
●
●
●
●
●
❍
–
●
–
●
●
●
●
❍
Service
Field measurements
–
●
–
–
●
–
–
●
–
●
●
●
●
●
–
●
–
●
●
–
●
●
❍
●
Depth measurements
–
–
–
●
–
–
–
–
External control/PC connection/
PC control
–
●/●/–
●/●/●
●/●/–
–
–
–
●/●/–
Suitable for USP 27
●
●
●
●
●
●
●
●
●
●
–
●
●
–
–
●
●
●
●
●
●
Measurement of ultrapure water
●
●
●
●
●
●
●
●
Trace conductivity
●
●
●
●
–
–
●
●
see page
40
40
41
42
for conductivity measurements with multi-parameter instruments see page 50
45
44
44
44
Laboratory measurements
Salinity/TDS measurement
LR325/001
TetraCon®
DU/T
TA 197 LF
USP 27
–
–
●
●
–
–
Pharmaceutical water
❍
❍
●
–
–
–
●
–
❍
●
–
–
–
●
–
–
–
●
●
❍
●
–
–
–
–
–
●
–
–
●
–
–
–
–
●
–
●
●
–
–
–
–
–
–
❍
❍
–
–
●
❍
–
●
–
❍
–
●
–
●
–
–
❍
–
●
–
–
❍
–
–
–
–
–
–
–
–
–
Application Range
Sensors
Chemical water
Ground water
Surface waters
Depth measurements (barrages)
Laboratory measurements
Foods industry (juices)
Swimming pools
Pharmaceutics
Cosmetics/Detergents
TetraCon®
325
LR 325/01
●
–
TetraCon®
325/S
Specific resistance
only SAL
Semi-conductor industry
–
Paint/Varnish (soluble)
●
●
Electroplating
applicable instruments:
all/except all/except all/except all/except all/except
VARIO
VARIO/
VARIO
VARIO/
VARIO/
315i
315i
315i
Parameter
pH
Cond 197i
–
●
Routine measurement with documentation
ORP
Cond 740
–
●
Routine measurement
ISE
Cond 730
●
Application Range
Oxygen
(D.O.)
Cond 720
Profi- VARIO Handheld Meters
Line
Conductivity
inoLab®
Multiparameter
– not recommended
BOD/
Respiration
❍ conditionally applicable
Photometers
● recommended by WTW
Seite 39
Turbidity
19:27 Uhr
Colony
Counter
01.02.2005
Software/
Printers
US_L_07_Cond_038_049.qxd
Cond
197i
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
39
US_L_07_Cond_038_049.qxd
01.02.2005
19:28 Uhr
Seite 40
Conductivity
NEW
Conductivity
Laboratory
Conductivity
MetersMeters
Conductivity is an important parameter that is often used for monitoring water quality.
In the laboratory sector this parameter has also increased in importance since the
introduction of USP 27 Guideline for pharmaceutical water. WTW inoLab® Cond
laboratory instruments meet all the requirements for measurements according to
this standard.
inoLab® Cond 720
Simple and reliable
Application specific
displays
Touch-sensitive keypad
with pressure point and
tactile response
Battery or line power
operation
Routine laboratory conductivity meter with
large multifunctional display, parallel
temperature display and automatic
temperature compensation. 68 °F or 77 °F
(20 °C or 25 °C) can be set as reference
temperature. Both TDS and salinity measurements are possible as well as
conductivity and temperature. The ability to set different cell constants means
that other special conductivity cells can be connected as well as the TetraCon® 325
4-electrode conductivity cell and LR 325/01 ultrapure water conductivity cell.
inoLab® Cond 730
Compact and precise
Simplified operator
convenience
GLP documentation
via PC or optional
built-in printer
Meets all the requirements of USP 27
40
Standard laboratory conductivity meter
with large multifunctional display, parallel
temperature display and automatic temperature compensation. The datalogging
capability and the real-time clock allows for all GLP functions.
Data output can take place via the optional built-in printer on thermal paper
accepted for use for official documents or via the built-in RS 232 digital interface
via a PC or external printer.
68 °F or 77 °F (20 °C or 25 °C) can be set as reference temperature. Both TDS and
salinity measurements are possible as well as conductivity and temperature. The ability
to set different cell constants means that other special conductivity cells can be connected as well as the TetraCon® 325 4-electrode conductivity cell and LR 325/01
ultrapure water conductivity cell.
IP 43
3 Year
Warranty
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
Seite 41
NEW
inoLab® Cond 740
Conductivity Meters
inoLab® Cond 740 with Terminal or PC software:
flexible and powerful
Meets all the requirements
of USP 27
High-performance laboratory conductivity meter with graphic display and digital
recorder function, parallel display of temperature and automatic temperature
compensation. A built-in datalogger and a real-time clock allows for all QA conforming
functions. The optional built-in printer allows data printout on thermal paper
accepted for use in official documents.
Parameter
19:28 Uhr
pH
01.02.2005
TDS and salinity measurement
External control with
MultiLab® pilot via PC
ISE
68 °F or 77 °F (20 °C or 25 °C) can be set as reference temperature. Both TDS and
salinity measurements are possible as well as conductivity and temperature. The
ability to set different cell constants means that other special conductivity cells can
be connected as well as the TetraCon® 325 4-electrode conductivity cell and
LR 325/01 ultrapure water conductivity cell.
ORP
US_L_07_Cond_038_049.qxd
Oxygen
(D.O.)
A PC keyboard interface allows an external keyboard or a barcode reader to be
connected.
additional features
Range/Resolution
Conductivity
Multiparameter
Cond 720 and Cond 730
Cond 740
Temperature:
Salinity:
TDS:
Resistivity:
0.0 µS/cm ... 500 mS/cm in 5 measuring ranges
or AutoRange additionally for
K = 0.1 cm-1: 0.00 µS/cm ... 19.99 µS/cm
K = 0.01 cm-1: 0.000 µS/cm ... 1.999 µS/cm
23 … 211.82 °F (-5.0 ... +99.9 °C)
0.0 ... 70.0
0 ... 1999 mg/l
0.000 ... 1999 MΩcm
0.0 µS/cm ... 2000 mS/cm in 5 measuring ranges
or AutoRange additionally for
K = 0.1 cm-1: 0.00 µS/cm ... 20.00 µS/cm
K = 0.01 cm-1: 0.000 µS/cm ... 2.000 µS/cm
23 … 221 °F (-5.0 ... +105.0 °C)
0.0 ... 70.0
0 ... 2000 mg/l
0.000 ... 2000 MΩcm
Conductivity:
Temperature:
± 0.5 % of value
± 0.1 K
Conductivity:
Accuracy (± 1 digit)
Reference temperature
68 … 77 °F (20 °C or 25 °C) selectable
Cell constants
0.475 cm-1, 0.1 cm-1 and 0.01 cm-1 fixed; freely
selectable 0.25 ... 2.5 cm-1 and 0.09 ... 0.11 cm-1
Temperature compensation
Automatic or switched off
Temperature coefficient
• Non-linear function for natural water to EN 27 888
• Linear compensation from 0.001 ... 2.999%/K
• No compensation
Calibration
With 0.01 mol KCl
0.475 cm-1, 0.1 cm-1 and 0.01 cm-1 fixed;
freely selectable 0.25 ... 2.5 cm-1
Colony
Counter
Model
Ordering Information
inoLab® Laboratory Conductivity Meter SETs – with wide-range power supply 100-240 VAC (50/60 Hz) included
Order No.
inoLab®
1C10-0111
Cond 720
Simple and reliable conductivity meter, including
TetraCon®
325 and accessories
inoLab® Cond 730
Compact precision conductivity meter, including TetraCon® 325, passive multifunction box and accessories
1C20-0111
inoLab® Cond 740P
The intelligent conductivity measuring station with additional built-in printer, TetraCon® 325 and accessories
1C31-0111
Passive multifunction box (not included in Cond 720 Set)
BOD/
Respiration
Technical Data
Photometers
3 Year
Warranty
IP 43
Turbidity
•
•
•
Built-in digital recorder
Real-Time Graphic Display
User Selectable Languages
Multi-Level GLP Functions
(password-protected operator levels)
Limit input with acoustic alarm
Meets all the requirements of USP 27
Free-of-charge software downloads for
MultiLab® pilot or terminal
Software/
Printers
•
•
•
•
109 810
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
41
US_L_07_Cond_038_049.qxd
01.02.2005
19:28 Uhr
Seite 42
Conductivity
Conductivity
Portable
Conductivity
Meters
Meters
ProfiLine Cond 197i
The WTW conductivity meter of the ProfiLine Cond 197i series is
both hoseproof (IP 66) and submersible (IP 67). Along with an
800 data file datalogger, a real time clock and recorder output, the ProfiLine Cond 197i conforms to all GLP requirements. They are equipped with a carrying/support handle
and carrying strap as standard.
New: Powerful NiMH rechargeable batteries.
The Cond 197i is suitable for depth measurements down to 330 ft (100 m) in
combination with the TA 197 LF
depth armature.
IP 66
IP 67
Highly precise, indestructible, waterproof
Large, silicone keys
for field use
Large, easy to read
display
Measurement down to
depths of 330 ft (100 m)
3 Year
Warranty
Conductivity depth armature TA 197 LF with built-in temperature sensor, up to 100 m cable with waterproof plug (IP 67),
pressure-resistant steel armoring (material VA 1.4571) with
screw-off protective hood, pressure-resistant to max. 10 bar,
fits into small boreholes (2“ dia.).
Technical Data
Model
ProfiLine Cond 197i
Range/
Resolution
LF:
Temp.:
Salinity:
TDS:
Accuracy
(±1 digit)
LF:
Temp.:
0.0 µS/cm … 500 mS/cm in 5 measuring ranges or AutoRange,
0.00 … 19.99 µS/cm for K=0.1 cm-1, 0.000 … 1.999 µS/cm for K=0.01 cm-1
23 … 221 °F (-5.0 °C … +105.0 °C)
0.0 … 70.0
0 … 1999 mg/l
±0.5 % of value
±0.1 K
Reference temp.
68 … 77 °F (20 °C or 25 °C), selectable
Call constant
Calibratable 0.450...0.500 and 0.800...1.200 cm-1, fixed: 0.01 cm-1
freely adjustable 0.25 … 2.5 cm-1 and 0.09 … 0.11 cm-1
Temperature comp.
Automatic, can be switched off
Temperature
coefficient
• Non-linear function for natural waters to EN 27 888
and ultrapure water function
• Linear compensation from 0.01 ... 2.99 %/K
• No compensation
Ordering Information
42
Portable Conductivity Meter –
with wide-range power supply 100-240 VAC (50/60 Hz) included
Order No.
ProfiLine Cond 197i
3C30-010
Robust, waterproof, submersible conductivity meter
Depth armatures down to 330 ft (100 m) see brochure “Product Details”
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
19:28 Uhr
Seite 43
Conductivity
Handheld
Conductivity
Meters
Meters
Conductivity Meters
Parameter
01.02.2005
pH
US_L_07_Cond_038_049.qxd
BOD/
Respiration
Multiparameter
4-electrode principle
allows a wide range of
applications
Oxygen
(D.O.)
Up to 1500 hours of
continuous operation
Conductivity
Robust, shockproof, waterproof
ISE
ORP
Cond 315i, Cond 330i, Cond 340i
Photometers
Cond 340i in field armoring FM 325 (optional)
Software/
Printers
Useable anywhere, WTW handheld instruments are robust, easy to operate and
provide assured accurate readings. From the monitoring of on-line process systems
to field studies, WTW’s handheld Conductivity meters meet all your measurement
needs.
Turbidity
Complete as SET
Colony
Counter
Cond 330i in protective armoring
SM 325 (optional)
IP 66
IP 67
3 Year
Warranty
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
43
US_L_07_Cond_038_049.qxd
01.02.2005
19:28 Uhr
Seite 44
Conductivity
Conductivity
Handheld
Conductivity
Meters
Meters
WTW handheld conductivity meters are available in three versions:
Cond 315i
The simple conductivity meter for meeting higher demands. With only 5 keys for
error-free measurement with parallel temperature measurement, automatic temperature compensation, 4-electrode measuring technology.
Cond 330i
Robust and waterproof handheld conductivity meter for battery operation; with
parallel temperature display, integrated datalogger, GLP supporting functions, automatic and manual temperature compensation with linear temperature function and
non-linear function for ultrapure water and natural waters according to EN 27 888.
The temperature compensation can be switched off; either 68 °F or 77 °F (20 °C or
25 °C) can be selected as the reference temperature.
Cond 340i
As Cond 330i, but with additional analog and digital RS 232 output and an optional power supply is available.
Cond 315i
Technical Data
Model
Cond 315i
Range/
Resolution
LF:
Temp.:
Salinity:
TDS:
Resistivity:
Accuracy
(± 1 digit)
LF:
Temp.:
Cond 330i and Cond 340i
0.0 µS/cm … 500 mS/cm in 5 measuring ranges or AutoRange 0.00 µS/cm ... 19.99 µS/cm (for K=0.1 cm-1)
0.000 µS/cm ... 1.999 µS/cm (for K=0.01 cm-1)
23 … 221 °F (-5.0 °C … +105.0 °C)
0.0 … 70.0
–
0 … 1999 mg/l
0.000 ... 1999 MΩcm
±0.5 % of value
±0.1 K
Reference temp. Tref
68 … 77 °F (20 °C or 25 °C), selectable
Cell constant
Fixed 0.475 cm-1, 0.1 cm-1
Temperature comp.
Automatic, can be switched off
Temperature
coefficient
• Non-linear function for natural waters (nLF) to EN 27 888 and ultrapure water function
–
• Linear compensation from 0.01 ... 2.99 %/K
• No compensation
0.475 cm-1, 0.1 cm-1 and 0.01 cm-1 fixed and 0.25 ... 2.5 cm-1 and 0.09 ... 0.11 cm-1 adjustable
Ordering Information
Handheld Conductivity Meter SETs
Order No.
Cond 315i
Robust and waterproof battery-operated handheld conductivity meter,
including TetraCon® 325, professional case and accessories
2C10-0011
Cond 330i
Robust and waterproof battery-operated handheld conductivity meter with datalogger,
including TetraCon® 325, professional case and accessories
2C20-0011
Cond 340i
Robust and waterproof battery-operated handheld conductivity meter with datalogger and serial interface,
including TetraCon® 325, professional case and accessories
2C30-0011
Universal wide-range power supply 100 V - 240 V, 50 - 60 Hz; for 340i series
44
902 867
Other measuring cells in SET see brochure “Product Details”
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
10:09 Uhr
Seite 45
Conductivity
VARIO Cond
Meters
Conductivity Meters
Parameter
02.02.2005
pH
US_L_07_Cond_038_049.qxd
NEW
ORP
Simple measurement at a your
fingertips – now also available for
conductivity measurement!
ISE
Touch screen
Large operating range
Oxygen
(D.O.)
Plug-in cells – no cables
Model
VARIO Cond
Range
[µS/cm] 0.00 … 19.99 (when
and Resolution
using module LR01 V)
0.0 … 199.9
0 … 1999
[mS/cm] 0.00 … 19.99
0.0 … 199.9
Resistivity [k*cm] 0.000 … 1.999
0.00 … 19.99
0.0 … 199.9
0 … 1999
Resistivity [M*cm] 0.00 … 19.99
0.0 … 199.9
0 … 1999
SAL 0.0 … 70.0
according IOT
TDS [mg/l] 0 … 1999
T [°F/°C] 41…221/5.0…+105.0
Multiparameter
BOD/
Respiration
Increased precision through the omission
of cable connectors – the VARIO Cond is
an appropriate solution for servicing and
maintaining water treatment equipment.
No matter whether using it for pure
water measurement in semi-conductor
industry or in cell culture laboratories,
the pure water conductivity cell with
flow-through vessel always allows a rapid
and easy control measurement.
Photometers
Technical Data
The globally renowned measurement cell
TetraCon® 325 was specially shortened
and modified for the VARIO Cond. With
extra ultrapure water cell and flow vessel
the Vario Cond is uniquely suited for
ultrapure water analysis.
Turbidity
VARIO Cond has a lot to offer – at an
excellent price. This economical designed
meter is ideal for use in process control
monitoring or anywhere a small, accurate
meter is needed. The VARIO is small,
light, handy, waterproof and has a robust
firm-grip rubber armoring.
Miniature precision
Long-lasting power.
VARIO Cond offers up to 500 hours of
continuous operation – with just one
standard battery. The low power technology shuts down the device after 10
minutes in standby. Changing the battery
is easy and quick.
Colony
Counter
VARIO Cond
Conductivity
3 Years
Warranty
Ordering Information
VARIO Cond
Order No.
VARIO Cond Set
VARIO Cond in the mobile case set, incl. 4-electrode cell and KCI solution 0.01 mol/l
2X00-001A
VARIO Cond Set
VARIO Cond in the mobile case set, incl. ultra pure water cell and flow-through vessel
2X00-001B
Software/
Printers
IP 65
Other accessories see brochure “Product Details”
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
45
US_L_07_Cond_038_049.qxd
01.02.2005
19:29 Uhr
Seite 46
Conductivity
Conductivity
Conductivity Cells
Meters
TetraCon®
For more than 50 years WTW has been one of the leading manufacturers worldwide of precision conductivity meters and cells. The TetraCon® 4-electrode system
is the result of our commitment to quality and sets a new standard for professional
conductivity measurements. In comparison with conventional measuring cells with
2 electrodes, the TetraCon® conductivity cell offers numerous technical advantages:
•
•
•
•
•
•
•
•
•
•
Highest degree of precision and linearity by optimized cell geometry
Extremely large measuring range with just one cell
Long-term cell constant stability with high-quality
abrasion-resistant graphite electrodes
With built-in temperature sensor as standard
Smallest immersion depth possible
No measuring errors even with very dirty electrode –
contact resistance on the electrode surface is automatically compensated
No measuring errors from cable influences
No measuring errors from primary or secondary polarization effects
No measuring errors due to contact with side walls or base of measuring vessels
Robust, unbreakable epoxy body
●
●
●
●
●
●
●
5
5
5
5
5
5
5
5
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
4
4
4
4
●
●
5
5
●
●
●
●
Cond 197i
LF 597
2
2
2
●
●
●
●
●
●
5
5
5
5
5
5
5
5
●
●
●
●
●
●
●
●
●
●
●
2
2
●
●
●
●
●
●
●
4
4
LF 197
2
Multi 350i
●
MultiLine® P3 pH/LF,
pH/Cond 340i
●
●
●
●
MultiLine® P4,
Multi 340i, Multi 197i
2
MultiLab® P4/P5
inoLab® Cond,
pH/Cond, Multi
2
MultiLab® 540
Cond 330i/340i
2
LF 3000
LF 330/340A
2
LF 539
LF 320/323/325
2
LF 538
LF 318
2
LF 537
LF 315
Cond 315i
Measuring cell
LTA 1
LTA 10
LR 01/T
KLE 1/T
KLE 315
TetraCon® 96
TetraCon® 96-1,5
TetraCon® 325
TA 197 LF
TetraCon® 325/Pt
TetraCon® DU/T
TetraCon® DU/TH
LR 325/01
LR 325/001
TetraCon® 325/S
ConOx
TetraCon® V
LR01 V
VARIO Cond
Selection Guide
5
5
●
●
●
4
4
Adapter (possible conversion with cell constants) is required:
46
2 Adapter cable K/LTA together with temperature sensor TFK 325 or TFK 150
4 Connection cable KKDU
5 Connection cable KKDU 325
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
01.02.2005
19:29 Uhr
Seite 47
301 961
40/120 mm
30/120 mm
301 992
V4A steel
–
V4A steel
4.72 in (120 mm)
K = 0.1 cm-1
0.47 in (12 mm)
4.9 ft (1.5 m)
0.001 µS/cm ... 200 µS/cm
32 … 212 °F (0 ... 100 °C)
17 ml (without sensor)
301 962
V4A steel
V4A steel
V4A steel
4.72 in (120 mm)
K = 0.01 cm-1
0.79 in (20 mm)
4.9 ft (1.5 m)
0.0001 µS/cm ... 30 µS/cm
32 … 212 °F (0 ... 100 °C)
ca. 10 ml (without sensor)
40 mm 40/120 mm
Conductivity
flow-thru cell
TetraCon® DU/T
301 252**
Graphite
–
Epoxy
6.10 in (155 mm)
K = 0.778 cm-1
–
3.3 ft (1 m) (only with KKDU 325)
1 µS/cm ... 2 S/cm*
32 … 140 °F (0 ... 60 °C)
7 ml
Turbidity
301 602
Graphite
–
Epoxy
4.72 in (120 mm)
K = 0.491 cm-1
0.60 in (15,3 mm)
4.9 ft (1.5 m)
1 µS/cm ... 2 S/cm*
32 … 212 °F (0 ... 100 °C)
–
Trace
conductivity cell
LR01 V LR 325/001
Colony
Counter
301 960
301 990
Order No.
Graphite
Electrode material
–
Flow-thru vessel
Epoxy
Shaft material
4.72 in (120 mm)
Shaft length
K = 0.475 cm-1
Cell constant
0.60 in (15,3 mm)
Diameter
4.9 ft (1.5 m)
Cable length
1 µS/cm ... 2 S/cm*
Measuring range
32 … 212 °F (0 ... 100 °C)
Temperature range
–
Filling volume
Min./max.
36/120 mm
40 mm
immersion depth
Ultrapure water
conductivity cell
LR 325/01
–
* Measuring range depends on particular instrument, ** Adapter cable KKDU 325 (order no. 301 963), length 3.3 ft (1 m), is necessary for the connection
For additional special measuring cells or other cable lengths see brochure “Product Details”
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
Software/
Printers
Standard
Special
conductivity cell
conductivity cell
®
®
TetraCon 325 TetraCon V TetraCon® 325/S
Photometers
BOD/
Respiration
Multiparameter
Conductivity
Oxygen
(D.O.)
ISE
ORP
pH
Conductivity Cells
Parameter
US_L_07_Cond_038_049.qxd
47
US_L_07_Cond_038_049.qxd
01.02.2005
19:29 Uhr
Seite 48
Conductivity
Conductivity
USP 27 and accessories
Meters
Calibration and testing agents
Kit for measuring conductivity
according to USP 27
This kit contains LR 325/01 Ultrapure
water cell, D01/T Flow-thru vessel
made of glass (USP-KIT 1) or stainless
steel (USP-KIT 2), NIST traceable 5 µS
standard with accuracy ±2 % and
6R/SET/LabTesting set
Calibration standard 100 µS/cm
Shelf life 2 years,
NIST traceable with accuracy ±3 %
NEW
Calibration standard 5 µS/cm
Shelf life 1 year,
NIST traceable with accuracy ±2 %
Ordering-Information
Kit for measuring the conductivity according to USP 27
Order no.
USP Kit 1
Kit for measuring conductivity according to USP 27,
consisting of LR 325/01 Ultrapure water cell, D01/T
Glass flow-thru vessel, NIST traceable 5 µS standard
with accuracy ±2% and 6R/SET/LabTesting set
300 569
USP Kit 2
As USP Kit 1, but flow-thru vessel made of
stainless steel instead of D01/T
300 568
KS 100µS
Calibration standard 100 µS/cm, shelf life 2 years,
NIST traceable with accuracy ±3% (300 ml)
300 578
KS 5µS
Calibration standard 5 µS/cm, shelf life 1 year,
NIST traceable with accuracy ±2% (300 ml)
300 580
EP/SET
Calibration and platinization set (6 x 50 ml bottles calibration
and control standard, KCl 0.01 mol/l, 30 ml platinizing solution,
1 calibration vessel), only for platinized cells
300 570
E/SET
Calibration set (6 x 50 ml bottles calibration and control
standard, KCl 0.01 mol/l)
300 572
Calibration agents
48
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
01.02.2005
19:29 Uhr
Seite 49
Multiparameter
Conductivity
Oxygen
(D.O.)
ISE
Conductivity measuring kit according
to USP 27, with stainless steel flow-thru
vessel for pharmaceutical water.
ORP
pH
USP 27 and accessories
Parameter
US_L_07_Cond_038_049.qxd
Photometers
BOD/
Respiration
Flow-thru vessels
Ordering Information
D 530
Order no.
Flow-thru vessel of transparent PVC,
suitable for conductivity cells and
temperature sensors,
I.D. 44 mm, V*=97 ml
108 060
Flow-thru vessel of transparent PVC,
I.D. 18 mm, V*=13 ml
203 730
Turbidity
for LTA 1, LTA, LTA 01 and TFK 530
D 201
Colony
Counter
for TetraCon® 325
for TetraCon® 96, LTA 100 and KLE 1
Flow-thru vessel, glass
I.D. 24 mm, V*=36 ml
302 730
Flow-thru vessel, glass
I.D. 18 mm, V*=17 ml
302 750
Software/
Printers
D 1/T
for LR 01/T and LTA 01
D 01/T
V*: filling volume without sensor
For information visit www.WTW.com for a customer care center near you or inside US: call WTW 800 645 5999.
49