RON’S AUTO SERVICE LTD.
AND EQUIPMENT RENTALS
Box 185, 103 Kam Lake Road
Yellowknife NT X1A 2N2
Ph: 867-766-6025 Fax: 867-873-4871
e-mail: [email protected]
2016 Rental Rate Guide
 All Pricing, Business Hours and Terms subject to change without notice
 All equipment subject to availability
 Buy out formula for units on rental attached
 Formula for overtime rates on units with hour meters attached.
NOTE: Over time on equipment rentals may be applied.
Regular hours are based on:
Day = 8hrs Week = 40hrs 4 Weeks = 160hrs
i___________________________________________________________________________
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
RON’S AUTO SERVICE LTD & EQUIPMENT RENTALS (RAS) Offers our customers
well maintained equipment at the fairest possible rental rates. Naturally we are in business to
make a fair profit in order to provide our customers with the most up to date equipment and to
assist them in completing their work economically.
INSURANCE
Once equipment leaves our building the customer is fully responsible until its’ return.
BUSINESS HOURS
Open from 8:00AM to 5:30PM Daily and from 9:00AM to 2:00PM Saturdays.
RENTAL CONDITIONS
 All rentals require proper identification
 All rentals require a full address or Lot & Block number where equipment is to be used.
 Signed Visa or Master Card slip must be left as a deposit if there is no account
established
 Check all equipment taken out against rental slip before you sign
 Shortages at the time of return are charged
 Any abnormal repairs or cleaning are charged for
 Make sure all rental returns are checked by shop staff.
 Finalize all paper work in our office.
 Make sure you receive a rental return slip itemizing everything returned
PICK-UP & DELIVERY
Rental rates do not include delivery. The rental starts and stops at our building, where rental
originates. Delivery and pick-up charges are extra. (See rate schedule for costs). RAS will
provide pickup and delivery to the expediter at no charge with the exception of larger pieces of
equipment.
FUEL CONSUMPTION
All equipment requiring fuel leaves our premises with full tanks. Upon return, tanks are filled and
quantity used is charged to customer.
RENTAL PERIOD
One (1) day rental expires after twenty-four (24) hours and allows up to eight (8) hours use.
Every day is a rental day. One week rental allows for forty (40) hours use and a 4 week period
allows for one hundred sixty (160) hours of use.
OVERTIME CHARGES
Overtime hours apply to all equipment except light towers, calculated at 200 hours/4 week period.
Please see calculation sheet located on page 9 for formulas.
LONG TERM RENTALS
Published rental rates are based on short term needs "hourly, daily, weekly or 4 weeks”. Through
advanced negotiations and with a guaranteed term rental, we will submit a long term rate. Also a
lease plan is available.
BUY OUT FORMULA
RAS has a buyout program based on percentage of Rental paid then credited back at the time of
st
nd
purchase. Percentage formula based on retail price, i.e. 1 (4) week period 50%, 2 (4) week
rd
th
period 50%, 3 month 50%, 4 month 40% and so forth. Please see page 9 for complete details.
___________________________________________________________________________
ii
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
SERVICE RATES & REQUIREMENTS FOR RENTAL EQUIPMENT
In Shop service rates are $180/hour
Service call in town (locally) $180/hour
Service out of town or camp calls $125 - $180/hour
 Charges start from time of leaving either driving or arriving at airport till return to airport.
 Maximum 12 hour day, Minimum 8 hour day.
If Ron’s Auto’s equipment is required for long term and the mechanics are required on a full time
basis or for regular service schedule (program) then labour rates can be negotiated
If the service call is for equipment rented and owned by Ron’s Auto Service and if the equipment
is out of town, the Renter is responsible for travel, and travel time of technician, until arrived at the
equipment to be repaired.
Rental customers are responsible for abuse, misuse and damages to the equipment. Rental
customer is responsible for servicing of equipment on long term rentals.
Example: Every 250 hours all units with diesel/gas engines require service, oil change, oil filter,
fuel filter, air filter, belts, fluid levels etc.
Every 50 hours on portable equipment i.e. (plate tampers, generators, water pumps,
etc.).
All rental equipment is supplied with hostile and cold climate packages (arctic fluids, hoses,
heaters & lights if necessary).
Preferred rental rates may be negotiated if we are also providing service and parts.
EQUIPMENT SAFETY CERTIFICATIONS
All RAS equipment is inspected and serviced after each rental, as we keep our equipment ready
to go for long or short term rental and possibly to a remote location. RAS has a reputation that
our equipment works when it gets to site.
Our equipment has factory check list inspections performed yearly or more depending on hours.
RAS also has some equipment that has undergone nondestructive testing (NDT) and is Engineer
Certified. Fifty percent of our lifts are NDT certified at this time.
As a rule if customer requires NDT testing, the costs for engineer would be the responsibility of
the customer. There are certain exceptions to this i.e. term of rental. Approximate cost $500$1500 per unit for this inspection.
OTHER RELATED COSTS FOR SERVICE, INSPECTIONS, REPAIRS, PARTS, ETC.
Any non-OEM equipment or options required may incur extra charges (fire extinguishers / wheel
chocks). Quotes available upon request.
Renter is responsible for equipment maintenance.
 Large Diesel Equipment - service required every 250 hours
 Small Diesel Equipment - service required every 50 hours
 Small Gas Equipment - service required every 50 hours
**Service charges apply to overdue services on equipment – chargeable by the hour at
$3.00/hour.
___________________________________________________________________________
iii
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
Hydro oil needs inspection, changing or testing at 1500 hours. In extreme conditions such as
heavy dust in summer or in a batch plant environment, equipment (i.e. Skid-steer/Generator) may
require filter changes more often. RAS offer parts, filters, belts etc. at a very competitive price.
In general, customer is responsible for tires, bulbs, belts, etc. classed as maintenance items.
In the case of other items, such as batteries, each repair would have to be determined at the time
of failure. RAS will be fair and honest with customer on these issues and will accept
responsibility to supply normal wear and tear items.
If failure is due to the extreme conditions encountered; customer is responsible. The cold weather
climate does create more breakdowns (i.e. hoses, joysticks, fuel filters, air filters, fuel conditioner
and other extra expenses).
We must work together on failed items as they would require some discussion. For example, if
starter failure is due to normal wear or due to over cranking because unit was run out of fuel, had
not been plugged in or been boosted.
HYDRAULIC HOSES
RAS units are all arctic based. If hose fails due to age then RAS may assume responsibility for
this item. If hose fails due to extreme cold then that is customer’s responsibility.
In case of breakdowns, RAS does allow equipment to be exchanged or swapped out provided
unit and shipping available. We can offer down time if a problem is reported and an inspection is
carried out by RAS technician, as soon as possible after breakdown. As well, allowance for
freight time to site for the repair parts is reasonable. RAS will make every effort to be on site
within one day to trouble shoot problems as long as technician and travel is available.
All parts are FOB Yellowknife, unless quoted or requested, otherwise.
SAFETY TRAINING
Training is available for Aerial Equipment / Forklifts / Skid Steers / Telehandlers / Loaders / Mini
Excavators / Fall Protection rates are $180/ hour –or- per student (depending on class size).
Please call for rates.
PRICES
Prices are subject to change without notice.
SCAFFOLD
Rules for safe operation are located on page 18
& 19.
___________________________________________________________________________
iv
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
TABLE OF CONTENTS
BOARDROOM / CLASSROOM .................................................................................................... 12
BUY OUT FORMULA ................................................................................................................... 13
BUY OUT REQUEST .................................................................................................................... 14
CALCULATION FOR OVERTIME CHARGES ............................................................................. 15
DELIVERY / PICK UP RATES ...................................................................................................... 16
RENTAL AGREEEMENT .............................................................................................................. 17
SCAFFOLD GUIDELINES ............................................................................................................ 18
SCAFFOLD SAFETY RULES ....................................................................................................... 19
AERIAL WORK PLATFORM………………………………………………………………………...20-21
SCISSOR LIFTS ELECTRIC BATTERY POWERED - SELF PROPELLED .......................................20
DUAL FUEL DIESEL SCISSOR LIFTS ..............................................................................................20
BOOM LIFTS ARTICULATING ..........................................................................................................20
BOOM LIFTS STRAIGHT BOOM .......................................................................................................21
MATERIAL LIFT .................................................................................................................................21
AIR EQUIPMENT ..................................................................................................................... 22-23
AIR COMPRESSORS ...........................................................................................................................22
AIR TUGGER ......................................................................................................................................23
AIR TAMPER .......................................................................................................................................23
AIR HOSE ............................................................................................................................................23
AIR TOOLS ................................................................................................................................... 24
AUGERS ....................................................................................................................................... 25
SOIL .....................................................................................................................................................25
ICE .......................................................................................................................................................25
AUTO TOOLS AND SHOP EQUIPMENT ............................................................................... 26-27
CARPENTRY TOOLS ................................................................................................................... 28
CHAINS & BOOMERS .................................................................................................................. 28
COME ALONGS / CHAIN FALLS / TIRFORS ........................................................................ 28-29
COMPACTION .............................................................................................................................. 29
TAMPER RAMMERS ...........................................................................................................................29
PLATE TAMPERS ...............................................................................................................................29
CONCRETE EQUIPMENT ....................................................................................................... 30-32
CONSTRUCTION EQUIPMENT ................................................................................................... 33
DIAMOND PRODUCTS ........................................................................................................... 34-35
BLADE RENTAL ..................................................................................................................................34
CORE BIT RENTAL .............................................................................................................................35
DRILLS AND GRINDER………………………………………………………………………….…..36-40
DISPENSERS / CAULKING GUNS .....................................................................................................40
DRILL STEEL & BITS………………………………………………………………………………...40-42
ELECTRICAL ................................................................................................................................ 43
EXCAVATORS ......................................................................................................................... 44-45
BREAKERS ..........................................................................................................................................45
EXTRA BUCKETS ...............................................................................................................................45
FANS ............................................................................................................................................. 46
FLOORING EQUIPMENT ............................................................................................................. 47
SHOP VACS .........................................................................................................................................47
FLOOR SANDERS ...............................................................................................................................47
FLOOR MAINTAINER ........................................................................................................................48
FORKLIFTS................................................................................................................................... 49
TELEHANDLER (ZOOM BOOMS) .....................................................................................................49
ATTACHMENTS/PARTS .....................................................................................................................49
GENERATORS ............................................................................................................................. 50
GENERATORS / LIGHT PLANTS ................................................................................................ 52
LIGHT TOWERS (TRAILER MOUNTED) ..........................................................................................52
HEATERS ...................................................................................................................................... 53
KEROSENE FIRED .............................................................................................................................53
KEROSENE FIRED/ELECTRIC DRIVEN...........................................................................................53
KEROSENE/DIESEL FIRED - ELECTRIC DRIVEN ..........................................................................53
CLEAN AIR FROSTFIGHTERS ..........................................................................................................54
HAMMERS .................................................................................................................................... 56
IN-VIRO DRUM ............................................................................................................................. 56
JACKS AND HOISTS ................................................................................................................... 57
COME ALONGS / CHAIN FALLS / TIRFORS ....................................................................................58
LADDERS ..................................................................................................................................... 59
STEP LADDERS ..................................................................................................................................59
EXTENSION LADDERS ......................................................................................................................59
LITTLE GIANT ....................................................................................................................................59
LAWN AND GARDEN EQUIPMENT ....................................................................................... 60-61
LEVELS ......................................................................................................................................... 62
LIGHTS.......................................................................................................................................... 63
LOADERS (SKID-STEER) ............................................................................................................ 64
LOADERS (MINI TRACK LOADERS) .......................................................................................... 65
LOADERS (ATTACHMENTS) ...................................................................................................... 65
LOADERS (PARTS & ACCESSORIES) ...................................................................................... 67
LOADERS ..................................................................................................................................... 67
LOADERS (BACKHOE) ............................................................................................................... 67
PAINT & WALLPAPER EQUIPMENT .......................................................................................... 68
PARTY EQUIPMENT .................................................................................................................... 68
PIPE CUTTERS............................................................................................................................. 69
PIPE STANDS ............................................................................................................................... 69
PLUMBING EQUIPMENT ............................................................................................................. 69
PRESSURE WASHERS ............................................................................................................... 71
PUMPS ..................................................................................................................................... 72-75
DISCHARGE HOSE ............................................................................................................................74
DISCHARGE HOSE (PLASTIC LAYFLAT) ........................................................................................74
SUCTION HOSE (RED RUBBER) ......................................................................................................75
FUEL TRANSFER HOSE ....................................................................................................................75
GARDEN HOSE...................................................................................................................................75
PUMPS TOOLS & TANKS ........................................................................................................... 76
REBAR BENDERS / SHEARS ..................................................................................................... 76
SAFETY EQUIPMENT .................................................................................................................. 77
SANDERS……………………………………………………………………………………………....77-78
SAWS……………………………………………………………………………………………………79
SCAFFOLDING ............................................................................................................................. 82
SNOW CLEARING EQUIPMENT ................................................................................................. 85
SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S................................................................. 86
STAPLERS AND
NAILERS……………………………………………………………………………...888
STRAPPING & BINDING ............................................................................................................. 89
TOOL BOXES / CARRY CASES / SEACAN ............................................................................... 89
TRAILER RENTAL RATES .......................................................................................................... 90
TRACTORS ................................................................................................................................... 90
WELDING, TORCHES AND CUTTING OUTFITS…………………………………………………91-94
INDEX
A
AERATOR (Lawn) ......................................................................................................................................................... 56
AIR COMPRESSOR ...................................................................................................................................................... 22
ARGO
ATV ARGO............................................................................................................................................................... 86
TRAILER ATV TUB ................................................................................................................................................ 87
AUGER .............................................................................................................................................................. 25, 61, 64
B
BATTERY CHARGER
CHARGER ................................................................................................................................................................ 26
BBQ ................................................................................................................................................................................ 68
BLOWER
BACKPAC BLOWER .............................................................................................................................................. 85
BACKPACK BLOWER ............................................................................................................................................ 61
BOLT CUTTER ............................................................................................................................................................. 26
BOOMERS ..................................................................................................................................................................... 28
BREAKER .....................................................................................................................................................22, 37, 38, 45
BULL FLOAT ................................................................................................................................................................ 31
C
CABLE ............................................................................................................................................................... 26, 64, 85
WELD CABLE ......................................................................................................................................................... 92
CARBIDE ......................................................................................................................................................37, 48, 78, 81
CARPET EXTRACTOR ................................................................................................................................................ 47
CARPET KICKER ......................................................................................................................................................... 43
CEMENT MIXER .......................................................................................................................................................... 30
CHAINSAW .............................................................................................................................................................. 79-81
CHAINSAW WINCH .................................................................................................................................................... 58
CHIPPER .................................................................................................................................................................. 22, 61
CHOCKS ........................................................................................................................................................................ 77
CLAY SPADE .......................................................................................................................................................... 37, 41
COME ALONG ................................................................................................................................................... 28-29, 58
CORDS - EXTENSION ................................................................................................................................................. 43
CORE DRILL ........................................................................................................................................................... 32, 39
CORESPLITTER............................................................................................................................................................ 35
CRANE
ENGINE CRANE ................................................................................................................................................ 26, 57
CRIMPER
AIRCRAFT CABLE CRIMPERS ............................................................................................................................. 89
BATTERY CABLE CRIMPERS .............................................................................................................................. 89
CUBE OIL ...................................................................................................................................................................... 76
CUTTING OUTFIT ........................................................................................................................................................ 91
CYLINDER DEGLAZER .............................................................................................................................................. 26
CYLINDER HONE ........................................................................................................................................................ 26
D
DOLLY ........................................................................................................................................................................... 57
DRILL
AIR DRILL ................................................................................................................................................... 22, 24, 37
ANGLE AIR DRILL ................................................................................................................................................. 24
ROTARY HAMMER ................................................................................................................................................ 36
SCREW GUN ................................................................................................................................................ 36, 48, 88
DRILL PRESS .......................................................................................................................................................... 26, 37
DRY WALL LIFT .......................................................................................................................................................... 57
E
EARTH AUGER ............................................................................................................................................................ 25
EXTENSION CORDS .................................................................................................................................................... 43
F
FAN
AIR MOVER ............................................................................................................................................................. 46
CARPET FAN ........................................................................................................................................................... 46
FENCE PULLER ............................................................................................................................................................ 28
FERTILIZER SPREADER ............................................................................................................................................. 60
FLOORSCRAPER.......................................................................................................................................................... 42
FOAM DISPENSING GUN ........................................................................................................................................... 68
G
GAS WINCH .................................................................................................................................................................. 58
GENERATOR
DIESEL GENERATOR ...................................................................................................................................... 46, 47
GAS GENERATOR .................................................................................................................................................. 46
GRINDER...................................................................................................................................................... 24, 36-40, 77
ANGLE GRINDER ................................................................................................................................................... 36
H
HAMMER ...................................................................................................................................................................... 52
SLEDGE HAMMER ................................................................................................................................................. 52
HEATER
ELECTRIC ................................................................................................................................................................ 53
GROUND HEATER ................................................................................................................................................. 54
KEROSENE .............................................................................................................................................................. 53
PROPANE ................................................................................................................................................................. 53
HEATER DUCT ............................................................................................................................................................. 54
HEDGE TRIMMER ....................................................................................................................................................... 61
HOSE
DISCHARGE HOSE ............................................................................................................................................ 74-75
GARDEN .................................................................................................................................................................. 75
SUCTION HOSE ...................................................................................................................................................... 75
I
ICE AUGER ................................................................................................................................................................... 25
IN-VIRO DRUM ………………………………………………………………………………………………………....56
J
JACK .................................................................................................................................................. See PALLET JACK
FLOOR ...................................................................................................................................................................... 57
HYDRAULIC............................................................................................................................................................ 57
RATCHET LEVER ................................................................................................................................................... 57
TRANSMISSION...................................................................................................................................................... 57
JACKALL....................................................................................................................................................................... 57
JOINTER ........................................................................................................................................................................ 84
K
KUBOTA........................................................................................................................................... 44, 45, 50, 67, 86, 90
..
L
LADDER ........................................................................................................................................................................ 59
LANYARD ..................................................................................................................................................................... 77
LAWN EDGER .............................................................................................................................................................. 61
LAWN ROLLER ............................................................................................................................................................ 60
LEVEL............................................................................................................................................................................ 62
LINO ROLLER .............................................................................................................................................................. 47
LOG SPLITTER ............................................................................................................................................................. 60
M
MAGNETIC LOCATOR (Sweeper) ........................................................................................................................ 40, 62
METAL DETECTOR ..................................................................................................................................................... 62
MOWER ................................................................................................................................................................... 60, 66
N
NAILER.......................................................................................................................................................................... 88
NIBBLER (Electric) ....................................................................................................................................................... 36
O
OIL CUBE ...................................................................................................................................................................... 76
P
PALLET JACK............................................................................................................................................................... 57
PANEL LIFT DRYWALL ............................................................................................................................................. 57
PIPE CUTTER MINI...................................................................................................................................................... 69
PIP E EXPANDER…………………………………………………………………………………………......…………27
PIPE WRENCH………………………………………………………………………………………………...………....69
PLANER…………………………………………………………………………………………………………………..28
SURFACE PLANER………. .............................................................................................................................. 32, 48
PNEUMATIC AIR POST DRIVER………………..………………………………………………...…………………..24
PRESSURE WASHER ................................................................................................................................................... 71
R
RAKE ............................................................................................................................................................................. 61
REBAR BENDER / SHEAR
REBAR BENDER ..................................................................................................................................................... 76
S
SANDBLASTER ............................................................................................................................................................ 73
SANDER ............................................................................................................................................................ 43, 72, 73
SAW .................................................................................................................................................................... 31, 79-81
SCISSOR LIFTS............................................................................................................................................................. 20
SEACAN ........................................................................................................................................................................ 89
SHEAR ELECTRIC…………...…………………………………………………………………………………….28, 36
SKID-STEER………………………………………………………………………………………………………….64-66
SHOVEL ........................................................................................................................................................................ 61
SHREDDER ................................................................................................................................................................... 61
SHOP VAC……………………………………………………………………………………………………………..…47
SNOWBLOWER ................................................................................................................................................ 66, 85, 90
SPREADER BAR………………………………………………………………………………………………………...29
SPREADER LIFTING BEAM
STAPLER ....................................................................................................................................................................... 88
SWEEPER .......................................................................................................................................................... 60, 61, 66
T
TANK
PORTABLE AIR TANK ........................................................................................................................................... 24
PROPANE TANK ................................................................................................................................................ 93-94
TIDY TANK ............................................................................................................................................................. 76
WATER TANK ......................................................................................................................................................... 79
TARPS ............................................................................................................................................................................ 33
TIGER TORCH .............................................................................................................................................................. 91
TILE CUTTER ............................................................................................................................................................... 31
TOOL CRIB (Van) ......................................................................................................................................................... 87
TORCH ...................................................................................................................................................................... 91-93
TORQUE WRENCHES ................................................................................................................................................. 27
TRAILER
SNOWMOBILE TRAILER ................................................................................................................................ 87, 90
UTILITY TRAILER.................................................................................................................................................. 90
W
WHEEL BARROW GAS POWERED ...................................................................................................................... 31-32
WINCH - GAS ............................................................................................................................................................... 58
WALL PAPER STRIPPER ……………………………………………………………………………………………....68
RON’S AUTO SERVICE LTD.
AND EQUIPMENT RENTALS
Box 185, 103 Kam Lake Road
Yellowknife NT X1A 2N2
Ph: 867-766-6025 Fax: 867-873-4871
e-mail: [email protected]
website: www.ronsauto.ca
Boardroom / Classroom
Room Size: 24’ x 32’
Board table: 5’ x 18.5’
• Table can be adjusted to eight individual tables 2.5’ x 4.5’ for classroom type
setting
• 16 adjustable executive chairs
• additional seating available
Equipment
Poly com conference phone with 2 additional speakers
Hands free phone with 3 way conference
ViewSonic LCD Projector
High speed internet connection
8’ x 4’ Magnetic white board
13” TV with VCR
Coffee service included in room rental.
Rental rate is $250.00 per day.
Parking is available outside the main gate.
Ron’s Auto Service Ltd is non-smoking.
Pop and snack vending machine available on site.
12
Buy Out Formula
Percentage of rent given back at time of purchase
1 (4) week period
2 (4) week period
3 (4) week period
4 (4) week period
5 (4) week period
6 (4) week period
7 (4) week period
50%
50%
50%
40%
30%
20%
10%
For this to be effective account must be kept current or this can affect the
formula.
Ron’s Auto Service Ltd reserves the right to change pricing.
13
BUY OUT REQUEST
RENTAL
CONTRACT#
CUSTOMER #
FAX #
DATE OF REQUEST
CUSTOMER
NAME
PHONE #
DISCOUNTED
QTY
ITEM
RENTAL RATE RENTAL
PERIOD
FROM
TOTAL TIME TOTAL RENT
TO
IN 4WK PERIOD
RENTAL
RETAIL
PURCHASE
PAID % REBATE PER EACH
PRICE
TOTAL BUY OUT COST FOR CONTRACT
14
BUY OUT FORMULA
1 (4) WEEK PERIOD 50%
2 (4) WEEK PERIOD 50%
3 (4) WEEK PERIOD 50%
4 (4) WEEK PERIOD 40%
5 (4) WEEK PERIOD 30%
6 (4) WEEK PERIOD 20%
7 (4) WEEK PERIOD 10%
CALCULATION FOR OVERTIME CHARGES
DATE:
CUSTOMER NAME:
P.O. NUMBER:
R.A. NUMBER:
1) Rental Duration:
____________ To ____________ Inclusive - __________ Days
2) Hour Meter Reading:
UNIT #
HRS. OUT
HRS. IN
TOTAL HRS
__________
__________
__________ =
__________
TOTAL HOUR USAGE
__________
3) Allowable Hours Usage: (Covered under regular rates based on 28 day month)
200 Hrs. per Month
50 Hrs. per Week
10 Hrs per Day
Rental Duration: =
______ (Days) =
______ Mth(s) x 200 = __________
______ Wk(s) x 50 = __________
______ Day(s) x 10 = __________
TOTAL ALLOWABLE HOURS
__________
4) Overtime Hourly Rate:
Net Monthly Rate _________ divide by 200 (Hrs) = $________ Per Hour Factor
5) Overtime Charge: Calculation
{a}
Total Hour Meter Reading
Less Allowable Hours
__________
__________
__________ OVERTIME HOURS CHARGABLE
(Overtime Hours)
_________ X __________ (Per Hour Factor)
=
{b} Rental Charge before overtime
__________
$ ____________
**Overtime Charges shall NOT exceed two (2) times the total rent charged
___________________________________________________________________________
15
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
DELIVERY / PICK UP RATES
Standard Delivery & Pick-up Charges
Delivery
Pick-up
$100.00
$100.00
Load and unload fees will apply based on $120.00/ hour.
NOTE:
CUSTOMER IS RESPONSIBLE FOR LOADING/UNLOADING
& SECURING OF LOADS
Price quoted is for pick-up or delivery
Skid-Steers
Excavator
Electric Scissor Lifts
Rough Terrain Scissor Lifts
Boom Lifts
Large Excavator
$175.00/hour
$175.00/hour
$175.00/hour
$225.00/hour
$225.00/hour
$225.00/hour
Charges are for deliveries and pick-ups within City limits.
___________________________________________________________________________
16
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
RENTAL AGREEEMENT
LEASE
By this lease and in consideration of the statements on the reverse side hereof and the following agreements, limitations and conditions, Ron’s Auto Service and Equipment Rentals Ltd. (RAS) hereinafter called lessor, leases unto the person, firm or corporation
signing this lease as lessee, hereinafter called lessee, that certain personal property, hereinafter called equipment, described on the reverse side hereof.
1.
TERM – Unless otherwise provided on the reverse side hereof, the term of this lease respecting each item of equipment commences on the date of pickup by the lessee or his agent, or, if shipped, the date of shipment by the lessor to the lessee, and ends on
the date of return by the lessee of the equipment to the lessor’s premises.
1 day equals 24 hours with maximum 8 hours operation. 7 days equals 1 week which equals 168 hours with maximum 40 hours operation.28 days equals 1 month which equals 672 hours with maximum 160 hours operation. Where guaranteed minimum
rental period is specified the lessee guarantees to pay the rate specified for the full term of the guaranteed rental period not withstanding early return or early termination of the rental period.
2.
RENT - The rent for any and every item of equipment shall be the amount designated on the reverse side hereof and section 30.
3.
PAYMENT – All rentals due under this agreement shall be paid monthly, weekly or daily, as the case may be depending upon whether the equipment has been rented by the month, by the week, or by the day, in advance to the office of the lessor. All overdue
payments shall bear interest at the rate of 2% per month (24% per annum) on the unpaid balance without prejudice to the lessor’s rights, and in particular without prejudice to the lessor’s right hereinafter stipulated to terminate the agreement for non-payment
of rental
4.
LOCATION - The equipment shall be located in the province or territory and at the address designated by the lessee at the time of execution of this agreement and shall not be removed from the said province, territory or from the designated address therein
without the lessor’s prior written consent.
5.
USE – Lessor shall comply with all laws in anywise relating to the use, operation or maintenance of the equipment. If lessor supplies lessee with labels stating that the equipment is owned by lessor, lessee shall affix and keep the same upon a prominent
place on the equipment.
6.
ACCEPTANCE – Lessee acknowledges that he has fully inspected and accepted said equipment in good condition and repair. The Lessee further acknowledges, the lessee is familiar with such equipment and the operation thereof and has inspected and
accepted said equipment in good operation condition.
7.
INSPECTION – Lessor shall at any and all times during business hours have the right to enter into and upon the premises where the equipment may be located for the purpose of inspecting the same or observing its use. Lessee shall give lessor immediate
notice of any attachment or other judicial process which affects or may affect any item of equipment and shall whenever requested by lessor advise lessor the exact location of the equipment.
8.
LOSS, DAMAGE AND REPAIRS – Lessee hereby assumes and shall bear the risk of loss and damage to the equipment from any and every cause whatsoever and shall keep and maintain the equipment in good repair, condition and working order. No loss
or damage to the equipment or any part thereof shall impair any obligation of lessee under this lease which shall continue in full force and effect. In the event of loss or damage of any kind whatsoever to any item of equipment, lessee at the option of lessor,
shall place the same in good repair, condition and working order or alternatively, replace damaged or lost equipment at today’s new market value or repair the damaged equipment, the cost of such repairs to be borne by the lessee together with interest on
the outstanding balance at the rate of 2% per month (324% per annum) from date of invoice to the date of payment.
9.
ALTERATIONS - Without the prior written consent of lessor, lessee shall not make any alterations, additions or improvements to the equipment. All additions and improvements of whatsoever kind or nature made to the equipment shall belong to and become
the property of lessor upon the expiration or earlier termination of this lease. The lessee will not alter, remove, disfigure or in anywise change any insignia or lettering upon any of the said equipment. The lessee shall not tamper with: Odometers,
Speedometers or Hourmeters on units equipped with same. If these meters show signs of tampering or disconnecting the customer agrees to the following charges at the option of the lessor. Odometers/Speedometers – A charge of 50 KM or 30 miles for
each hour the equipment was in the customer’s possession. Hourmeters – A charge of 1 hour for each hour the equipment was in the customer’s possession.
10.
DOWN TIME – Should the lessor suffer lost rentals or incur expenses as a result of the unavailability of leased equipment being repaired by the lessee, or lessor, due to damage or loss of the said leased equipment arising during the term of this lease, then
such lost rentals and expenses shall be the sole responsibility of the lessee and the lessee shall forthwith pay and/or reimburse the lessor for the same.
11.
EXPENSE – During the time of this lease, the lessee shall at the lessee’s own expense, pay the cost of:
a)
all fuel, oil and lubricants required to operate and maintain the equipment.
b)
all repairs, replacement parts including labour charges, required to be made to the equipment in order to keep it in good repair and running order.
12.
SURRENDER – Upon the expiration or earlier termination of this lease, lessee shall return the equipment to lessor in good repair, condition and working order, ordinary wear and tear resulting from proper use thereof alone excepted.
13.
TAXES AND ENCUMBERANCES – Lessee shall keep the equipment free and clear of all levies, liens and encumbrances and shall pay all license fees, registration fees, assessments, charges, taxes and encumbrances (municipal, provincial, territorial and
federal) which may now or hereafter be imposed upon the ownership, leasing, renting, sale, possession or use of equipment, including without limiting the generality of the foregoing, any and all taxes at whatever rates that are currently or may be in effect
with respect to sales tax, value added tax and/or goods and services tax.
14.
INSURANCE – The lessee shall at the lessee’s own expense maintain liability, theft, fire and any other insurance required to indemnify the lessor against any loss to or of the equipment to the extent of new replacement value at date of replacement or cash
equivalent, such insurance to cover the insurable interest of the lessor in said equipment. This insurance shall be kept in full force and effect from the time the equipment is leased out by the lessee or is shipped by the lessor until it is returned by the lessee to
the lessor during the lessor’s normal business hours with lessor’s acknowledgement. Customer will, on demand, furnish RAS with a Certificate of Insurance evidencing the applicable coverages. Such certificate(s) shall include liability limits of not less than
$2,000,000 per occurrence and shall be endorsed to provide that the applicable insurance policies may not be cancelled or materially modified except on thirty (30) days prior written notice to RAS at the location identified on the front.
15.
INSURANCE – The lessee agrees to immediately inform the lessor in writing of all losses or damages to the equipment and provide the lessor the name of the lessee’s insurance company, name and address of the lessee’s insurance agent, a copy of the
police report and complete information concerning insurance coverage for said loss or damage. The Lessee further hereby assigns and grants a security interest to the Lessor to any and all proceeds payable from any claims or otherwise generated from
insurance coverage over any and all of the personal property covered by this Agreement.
16.
LESSOR’S PAYMENT – In case of failure to procure or maintain said insurance or to pay said fees, assessments, charges and taxes, all as hereintofore specified, lessor shall have the right, but shall not be obligated, to effect such insurance or pay said
fees, assessments, charges and taxes as the case may be. In that event, the cost thereof shall be re-payable to the lessor with the next installment of rent, and failure to repay the same shall carry with it the same consequence, including interest at the rate of
two percent (2%) per month (twenty-four (24%) per annum), as failure to pay any installment of rent.
17.
WARRANTIES – Lessor makes no warranties, either expressed or implied, as to any matter whatsoever, and not restricting the generality of the foregoing, the condition of the equipment, its merchantability or fitness for any particular purpose. All sales of
new or used equipment shall be on an “as is – where is” basis without any warranty of any nature whatsoever, excepting only such warrant, if any, as may be provided by the manufacturer directly to the purchaser with respect to new equipment.
18.
FORCE MAJEURE – Lessor shall incur no liability whatsoever for any delay or failure to deliver the equipment or for any delay or failure to perform any of its obligations hereunder by reason of strike, lockout, threat of strike or lockout, fire, flood, interruption
or delay in manufacture or transportation, act of nature, war, insurrection, mob violence, requirement of governmental authorities, embargo, shortage of labour, equipment or materials, plant breakdown or any other causes beyond the control of lessor whether
or not such causes of delay or failure are in existence whether or not known to lessor at the time of completion of this agreement.
19.
INDEMNITY – Lessee shall indemnify lessor against, and hold lessor harmless from any and all claims, actions, suits, proceedings, costs, expenses, damages and liabilities, including solicitor’s costs, on a solicitor-client basis, arising out of, connected with,
or resulting from the equipment, including without limitation, the manufacture, selection, delivery, possession, use, operation or return of the equipment.
20.
SECURITY – As security for the prompt and full payment of the rent, and faithful and timely performance of all provisions of this lease, and any extension or renewal thereof, on its part to be performed, lessee has pledged and deposited with lessor the
amount set forth on the reverse side hereof. In the event any default shall be made in the performance of any of the covenants on the part of lessee herein contained with respect to any item or items of equipment, lessor shall have the right, but shall not be
obligated to apply said security to the curing of such default. Any such application by lessor shall not be a defense to any action by lessor arising out of said default; and, upon demand, lessee shall restore said security to the full amount set forth in the
schedule. Upon the expiration, or earlier termination, of this lease, or any extension or renewal thereof, provided lessee has paid all of the rent herein called for and fully performed each and all of the other provisions of this lease on the part to be performed,
lessor will return to lessee any remaining balance of said security. The Lessee hereby further confirms that this Agreement and any extension or renewal or replacement hereof constitutes a security interest. The Lessee agrees and consents to the Lessor
filling any and all documentation required by any governmental authority whatsoever in any jurisdiction requiring registration of any such security interest, or interests, as are created by this Agreement and agrees to reimburse and indemnify the Lessor for
any expenditure that might be incurred in registering any documentation required by any jurisdiction or governmental authority in that regard. The Lessee acknowledges receipt of a duplicate copy of this Agreement and waives his right to receive a copy of
any document verifying registration of this Agreement.
21.
DEFAULT – If lessee with regard to any item or items of equipment fails to pay any rent or other amount herein provided within ten (10) days after the same is due and payable, or if lessee with regard to any item or items of equipment fails to observe, keep
or perform any other provision of this lease required to be observed, kept or performed by lessee, lessor shall have the right at its sole discretion to exercise any one or more of the following remedies:
a)
To declare the entire amount of rent hereunder immediately due and payable as to any or all items of equipment.
b)
To sue for and recover all rents, and other payments then accrued or thereafter accruing, with respect to any or all items of equipment.
c)
To take possession of any or all items of equipment without demand or notice, wherever same may be located without any court order or other process of law. Lessee hereby waives any and all damages occasioned by such taking of possession.
Any said taking of possession shall not constitute a termination of this lease as to any or all items or equipment unless lessor expressly so notifies lessee in writing.
d)
To terminate this lease as to any or all items or equipment.
e)
To pursue any other remedy at law or in equity. Notwithstanding any said repossession, or any other action which lessor may take, lessee shall be and remain liable for the full performance of all obligations on the part of the lessee to be performed
under this lease.
All such remedies are cumulative, and may be exercised concurrently or separately.
22.
BANKRUPTCY – Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the lessee, or if the lessee is adjudged insolvent, of it the
lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of the equipment and is not released or satisfied within ten (10) days thereafter, or if a receiver is appointed in any proceeding or
action and given authority to take possession or control of any item or items of the equipment, lessor shall in its sole discretion have and may exercise any one or more of the remedies set forth in paragraph 21 hereof; and this lease shall, at the option of the
lessor, without notice, immediately terminate and shall not be treated as an asset of lessee from the date of the exercise of said option.
23.
LESSOR’S EXPENSE – Lessee shall pay lessor all costs and expenses, including solicitor’s fees on a solicitor/client basis incurred by lessor in exercising any of its rights or remedies hereunder or enforcing any of the terms, conditions, or provisions hereof
including any costs of removal of the said equipment.
24.
ASSIGNMENT – Without the prior written consent of lessor, lessee shall not:
a)
assign, transfer, pledge, or hypothecate this lease, the equipment, or any part thereof or any interest therein, or
b)
sublet or lend the equipment or any part thereof to be used by anyone other than lessee.
All rights of lessor hereunder may be assigned, pledged, mortgaged, transferred or otherwise disposed of, either in whole or in part without notice to lessee.
25.
OWNERSHIP – The equipment is, and shall at all times be and remain, the sole and exclusive personal property of lessor; and the lessee shall have no right, title or interest therein or thereto except as expressly set forth in this lease.
26.
PERSONAL PROPERTY - The equipment is, and shall at all times be and remain personal property notwithstanding that the equipment or any part thereof may now be, or hereafter become, in any manner affixed or attached to, or imbedded in, or
permanently resting upon, real property or any building thereof, or attached in any manner to what is permanent as by means of cement, plaster, nails, bolts, screws or otherwise. The lessee acknowledges that any property of the lessor that is affixed or
attached to any other property is solely for the better use of the lessor’s property.
27.
OFFSET – Lessee hereby waives any and all existing and future claims, and offsets, against any rent or other payments due hereunder, and agrees to pay the rent and other amounts hereunder regardless of any offset or claim which may be asserted by
lessee or on its behalf.
28.
NON WAIVER – No covenants or conditions of this lease can be waived except by the written consent of lessor. Forbearance or indulgence by lessor in any regard whatsoever shall not constitute a waiver of the covenants or conditions to be performed by
lessee to which the same may apply, and, until complete performance by lessee of said covenants or conditions lessor shall be entitled to invoke any remedy available to lessor under this lease or by law or in equity despite said forbearance or indulgence.
29.
TIME BASIS OF RATES – The rental rates herein are based upon the general practice industry of one shift of 8 hours per day, 40 hours per week, and 160 hours per a 4 week period, and if the equipment is used for periods in excess of the general practice,
th
th
overtime will be charged. If the equipment is rented by the day, the rate for overtime is 1/8 of the daily rate for each hour in excess of eight. If it is rented by the week, the rate for overtime is 1/40 of the weekly rate for each hour in excess of 40. If it is rented
th
by 4 weeks overtime rate is 1/160 of the monthly rate for each hour in excess of 160 hours in any one 28 consecutive day period. Lessee shall advise Lessor when equipment is used more than a single shift. Rental rates shall not be subject to any deduction
for any non-working time during the rental period, nor because the lessee returns the equipment to the lessor before the expiration of the minimum rental period. All charges will be calculated using the best combination of daily, weekly, and monthly to give
the lowest possible charges.
30.
LOADING, UNLOADING AND TRANSPORTATION – The lessee at his own expense shall load the equipment for transit and shall unload the said equipment upon its return. The lessee shall pay all shipping expenses from the original point of shipment to his
receiving point and all return shipping expenses to the lessor’s yard. Lessor assumes no responsibility for hook-up of trailer mounted units or loading equipment.
31.
LIEN – The lessee acknowledges that the lessor has a right to file a lien, under the appropriate legislation against the owner of the land where the equipment was used should rental payments not be forthcoming.
32.
DISCLOSURE – The lessor shall disclose fully and accurately the identity and address of those who will be using the equipment.
33.
SEVERABILITY – If any part of this agreement be declared or held invalid or unenforceable for any reason, such invalidity or unenforceability shall not affect the validity and enforceability of the remainder which shall continue in force and effect and be
construed as if this agreement had been executed without the invalid or unenforceable portion and it is hereby declared the intention of the parties hereto that this agreement would have been executed without reference to any portion which may, for any
reason, be hereafter declared or held invalid or unenforceable.
34.
ACKNOWLEDGEMENT – Lessee acknowledges and understands that the Agreement contained herein is and shall become part of every Rental Agreement, oral or written, between the Lessee and Lessor, and will be retained by the Lessor as evidence of
such Agreement for all other rentals by the Lessee.
35.
PROPER LAW – This agreement shall be governed by and construed in accordance with the laws of the province or territory in which the equipment is delivered. The lessee hereby waives the Limitation of Civil Rights Act of Saskatchewan or similar
legislation.
36.
ENTIRE AGREEMENT – This instrument constitutes the entire agreement between lessor and lessee; and it shall not be amended, altered or changed except by a written agreement signed by the parties hereto.
37.
TIME – Time is of the essence of this lease and each and all of its provisions.
38.
INTEREST – On any amounts arising under the terms of the contract shall bear interest of 2% per month (24% per annum) both before and after maturity, default and/or judgment.
39.
COPY OF DOCUMENTATION – The Lessee hereby agrees and waives any right it may have under any applicable legislation to receive a copy of this Agreement and /or any Financial Interest Statement of Financing Statement. Financing Change Statement
or Verification Statement or Renewal Statement or any documentation of similar effect.
40.
ENVIRONMENTAL RECOVERY FEE – The environmental recovery fee indicated above is a recovery by RAS of its expenses and costs for handling, managing and/or disposing of waste materials associated with the rented equipment that contain
hazardous substances, such as motor oil, grease and/or hydraulic fluid, as well as related administrative costs. THIS IN NOT A GOVERNMENT MANDATED CHARGE.+
17
Scaffold Guidelines
To All Customers:
AVOID INJURY OR DAMAGE TO EQUIPMENT
Follow the following suggestions to save time when returning equipment and save money on
damages.
 Never drop equipment from any heights as abuse of equipment will be charged for when
returned.
 If equipment is altered in any manner the customer will be charged for labour and materials
to repair the scaffold.
 Do not paint, colour code, label and scaffold parts. If you must paint or code our equipment
it must be removed before retuning. If equipment is returned in this way you will be charged
for removing paint, debris, scrapping, etc.
 Secure all scaffolds from falling and make sure scaffolds are level at all times when using.
 Do not attach or permanently secure any items to the scaffolds. Weld marks, screw holes.
And other foreign objects will be charged for removal and repair.
 Any rental product returned in a contaminated condition is subject to refusal of the said
product being left at our site. Financial recourse for decontamination of said product will be
at the customer’s expense.
 To avoid losing equipment secure all loads before leaving our site or jobsite.
 Before leaving the jobsite double check that you have all the equipment that you have
rented from us. If you don’t have a list please phone 766-6025 to get a list of outstanding
equipment.

NOTE!
WE ONLY ACCEPT OUR OWN EQUIPMENT. If equipment has been exchanged
on job sites between customers, ensure that you have all Ron’s Auto Service equipment.
 Our office must be immediately notified if any equipment is missing or stolen. This will avoid
continued rental charges.
_________________________________________________________________________________
18
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
Scaffold Safety Rules
As recommended by
Ron’s Auto Service Ltd
& Equipment Rentals
Scaffold Safety Rules
Following are some common sense rules designed to promote safety in the use of steel scaffolding. These rules are illustrative and
suggestive only, and are intended to deal only with some of the many practices and conditions encountered in the use of scaffolding. The
rules do not purport to be all-inclusive or to supplant or replace other additional safety and precautionary measurers to cover usual or
unusual conditions. They are not intended to conflict with, or supersede, any provincial, local or federal stature or regulation; reference to
such specific provisions must be made by the user or competent person. (See rule II)
I.
II.
III.
IV.
V.
VI.
VII.
VIII.
IX.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
POST THESE SCAFFOLDING SAFETY RULES in a conspicuous place and be sure that all persons who erect, dismantle or use scaffolding are aware
of them.
FOLLOW ALL OCCUPATIONAL HEALTH & SAFETY, LOCAL AND FEDERAL CODES, ORDINANCES, and REGULATIONS pertaining to scaffold.
INSPECT ALL EQUIPMENT BEFORE USING – Never use any equipment that is damaged/deteriorated in any way..
KEEP ALL EQUIPMENT IN GOOD REPAIR. Avoid using rusted or corroded equipment – the strength of rusted or corroded equipment is not known.
INSPECT ERECTED SCAFFOLDS REGULARLY to be sure that they are maintained in safe condition. Occupational Health requires the scaffold to be
inspected every 21 days. Tag the scaffold.
SCAFFOLDS MUST BE ERECTED IN ACCORDANCE WITH DESIGN AND/OR MANUFACTURERS’ RECOMMENDATIONS. Scaffolds should be
erected, dismantled and/or altered by a competent person or a person under the direct supervision of the competent person.
DO NOT ABUSE OR MISUSE THE SCAFFOLD EQUIPMENT.
NEVER TAKE CHANCES! IF IN DOUBT REGARDING THE SAFETY OR USE OF THE SCAFFOLD, CONSULT YOUR SUPPLIER.
DO NOT WORK ON SCAFFOLDS if your physical condition is such that you feel dizzy or unsteady in any way.
PROVIDE ADEQUATE SILLS for scaffold posts and/or use base
4. Secure planks and platforms to the scaffold.
N. FOR ROLLING SCAFFOLD THE FOLLOWING ADDITIONAL
plates.
RULES APPLY:
USE ADEQUATE SCREWS instead of blocking to adjust uneven
1. DO NOT RIDE ROLLING SCAFFOLDS.
grade conditions
2. SECURE OR REMOVE ALL MATERIAL AND
PLUMB and LEVEL ALL SCAFFOLDS as the erection proceeds.
EQUIPMENT from platform before moving scaffolds.
Do not force braces to fit – level the scaffold until proper fit is made
3. CASTOR BRAKES or blocked wheel shall prevent swivel
easily.
SECURELY FASTEN ALL SCAFFOLD COMPONENTS.
and rotating movement when workers are on the scaffold.
4. CASTORS shall be attached to the frame or screwjack by
DO NOT CLIMB CROSS BRACES. An access (climbing) ladder,
pins or other suitable means.
access steps, frame designed to be climbed or equivalent safe access
5. DO NOT ATTEMPT TO MOVE A ROLLING SCAFFOLD
to the scaffold shall be used.
WITHOUT SUFFICIENT HELP – watch out for holes in
SCAFFOLD TIES MUST RESTRAIN COMPRESSION AND
TENSION. The anchor for the ties must be secured and maintained
the floor and overhead obstructions.
6. DO NOT EXTEND ADJUSTING SCREWS ON ROLLING
every 6.4m (20’) horizontally and every 4.6cm (15’) in vertical height.
SCAFFOLDS more than 300mm (12”)
WHEN SCAFFOLDS ARE TO BE PARTIAL OR FULLY
7. USE HORIZONTAL DIAGONAL BRACING near the
ENCLOSED, specific precautions must be taken to ensure frequency
bottom ant at 6.4M (20’) intervals.
and adequacy of ties attaching the scaffold to the building due to
8. DO NOT USE BRACKETS ON ROLLING SCAFFOLDS
increased load conditions resulting from effects of wind and weather.
without consideration of overturning forces.
Occupational Health and Safety states that ties on enclosed scaffolds
9. THE WORKING PLATFORM HEIGHT must not exceed
must be 3m (10’) horizontally and 3m (10’) vertically.
FREE STANDING SCAFFOLD TOWERS MUST BE RESTRAINED
three (3) times the smallest base dimension unless it is
FROM TIPPING by guying or other means. The scaffold height to
guyed or otherwise stabilized.
O. For PUTLOGS and TRUSSES the following additional rules
base ratio must not exceed three (3) times the narrowest base.
apply
ALL PLATFORMS OR STAGES above 3m must be equipped with
1. DO NOT CANTILEVER OR EXTEND
proper guardrails, midrails and toeboards along all open sides and
PUTLOG/TRUSSES as side brackets without thorough
ends.
POWER LINES NEAR SCAFFOLDS are dangerous – use caution
consideration for loads and horizontal forces.
2. PUTLOG/TRUSSES SHOULD EXTEND at least 150mm
and consult the power service company for advise. If in doubt stay at
(6”) beyond the point of support unless knee braced.
least 7 meters from the line.
3. PLACE PROPER BRACING BETWEEN
DO NOT USE ladders or makeshift devices on top of the scaffolds to
PUTLOGS/TRUSSES when span of Putlogs/Trusses is
increase the height.
DO NOT OVERLOAD SCAFFOLDS.
more than 12’.
P. ALL BRACKETS shall be seated correctly with side brackets
PLANKING
parallel to the frames and end brackets at 90 degrees to the
1. Use only lumber that is properly inspected and graded as a
frame. Brackets shall not be bent or twisted from normal
scaffold plank.
position. Brackets are to be used as work platforms only and
2. Planking shall have at least 300mm(12”) of overlap and
NOT used for storage of material or equipment.
extended a minimum 150mm(6”) beyond the center of support,
Q. ALL SCAFFOLD ACCESSORIES shall be used and installed
or be cleated at both ends to prevent slipping off supports.
3. Fabricated scaffold planks and platforms unless cleated or
in accordance with the manufacturer’s recommended
restrained by cleated or restrained by hooks shall extend over
procedures. Accessories shall not be altered in the field.
their end supports not less than 150mm (6”) nor more than
Scaffolds, frames and their components, manufactured by
300mm (12”).
different companies shall not be intermixed.
_______________________________________________________________________________________________
19
Ron’s Auto Service Ltd
& Equipment Rentals
www.ronsauto.ca
AERIAL WORK PLATFORM
Description
Hourly
Daily
Weekly
4 Weeks
SCISSOR LIFTS ELECTRIC BATTERY POWERED
- SELF PROPELLED
20ft ELECTRIC SCISSOR NARROW 32" (GNI2032)
26ft ELECTRIC SCISSOR NARROW 32" (GNI2632)
$185.50
$225.00
$555.55
$655.00
$1640.00
$1885.00
30ft ELECTRIC SCISSOR STD-68" (GNI3268) OR
46" WIDE (GNI3246)
$260.00
$865.00
$2305.00
DUAL FUEL DIESEL SCISSOR LIFTS
30-33ft SCISSOR 4X4 DUAL/FUEL
(MEC3072/RT33)
40ft SCISSOR 4X4 DUAL/FUEL
$340.00
$1500.00
$3000.00
$490.00
$1430.00
$3440.00
50ft RT SCISSOR 4x4 DIESEL POWERED OR
DUAL FUEL
$525.00
$1800.00
$4415.00
30ft ART BOOM LIFT DC (GNIZ30/20N)
OR (JLGE300)
$405.00
$1200.00
$3250.00
40ft ART BOOM LIFT DC (GNIZ40/20NRJ)
$425.00
$1500.00
$3575.00
45ft ART BOOM LIFT DC (GNIZ45/25)
$445.00
$1600.00
$4000.00
DIESEL GAS BOOM LIFTS
ARTICULATING/KNUCKLE
45ft ART BOOM LIFT RT (GNIZ45/25)
$495.00
$1755.00
$4680.00
65ft ART BOOM LIFT RT (GNIZ60/34)
$665.00
$2250.00
$6755.00
80ft ART BOOM LIFT RT (GNIZ80/60)
$1215.00
$4775.00
$14,035.00
Z135 135ft ART BOOM RT (GNIZ135/70)
$4500.00
$11,080.00
$23,340.00
ELECTRIC BOOM LIFTS
ARTICULATING/KNUCKLE
OVERTIME RATES MAY APPLY ON LIFTS
DELIVERY & PICKUP EXTRA WITHIN CITY PREMISES
ELECTRIC SCISSORS
$175 BY THE HOUR
RT SCISSORS
$225 BY THE HOUR
BOOM LIFTS
$225 BY THE HOUR
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
20
AERIAL WORK PLATFORM
Description
Hourly
Daily
Weekly
4 Weeks
BOOM LIFTS STRAIGHT BOOM
45ft STRAIGHT BOOM (GNI S-45)
$575.00
$1900.00
$4925.00
65ft STRAIGHT BOOM RT (GNI S-65)
$665.00
$2250.00
$6755.00
85ft STRAIGHT BOOM RT (GNI S-85)
$1215.00
$4770.00
$14,035.00
125ft STRAIGHT BOOM RT (GNI S-125)
$3150.00
$7815.00
$19,500.00
$115.00
$405.00
$865.00
MATERIAL LIFT
GENIE SLC-24 MATERIAL LIFT
OVERTIME RATES MAY APPLY ON LIFTS
DELIVERY & PICKUP EXTRA WITHIN CITY PREMISES
ELECTRIC SCISSORS
$175 BY THE HOUR
RT SCISSORS
$225 BY THE HOUR
BOOM LIFTS
$225 BY THE HOUR
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
21
AIR EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
COMPRESSOR AIR 1-4 CFM 110V 4.5 GAL PRIME
I-R 4.6 CFM
$30.00
$125.00
$330.00
COMPRESSOR AIR 5-7 CFM 110V 6 CFM 90 PSI 30
GAL I-R
$35.00
$135.00
$400.00
$50.00
$200.00
$600.00
$115.00
$445.00
$1,335.00
COMPRESSOR AIR 185 CFM 150 PSI DIESEL 91L
FUEL TANK WT 2670 LBS 1211 KG
$165.00
$615.00
$1,685.00
COMPRESSOR AIR 210 CFM 150 PSI DIESEL
$170.00
$625.00
$1,700.00
COMPRESSOR AIR 375 CFM 100 PSI DIESEL
$270.00
$1,030.00
$3,035.00
COMPRESSOR AIR 375 CFM 150 PSI DIESL
$305.00
$1,260.00
$3,690.00
COMPRESSOR AIR 750 CFM 100 PSI DIESEL
$480.00
$1,815.00
$5,270.00
COMPRESSOR AIR 750CFM 150 PSI DIESEL
$545.00
$2,225.00
$6,200.00
COMPRESSOR AIR 750 CFM 300 PSI DIESEL
$1,020.00
$3,875.00
$11,400.00
COMPRESSOR AIR 900 CFM 150 PSI DIESEL
$780.00
$2,765.00
$8,115.00
COMPRESSOR AIR 900 CFM 350 PSI DIESEL
$1,145.00
$4,500.00
$13,240.00
COMPRESSOR AIR 1200 CFM 150 PSI DIESEL
$1,100.00
$4,000.00
$11,550.00
COMPRESSOR AIR 1600 CFM 100 PSI DIESEL
$880.00
$3,500.00
$10,200.00
COMPRESSOR AIR 1600 CFM 150 PSI DIESEL
$1,100.00
$4,000.00
$11,550.00
BREAKER AIR 20 LBS CHIPPER
BREAKER AIR 30-35 LBS BREAKER (IR95LAI)
BREAKER AIR 60 LBS BREAKER (MX60)
$32.00
$35.00
$35.00
$125.00
$135.00
$135.00
$300.00
$365.00
$405.00
$60.00
$200.00
$550.00
$66.00
$230.00
$665.00
AIR COMPRESSORS
COMPRESSOR AIR 15 CFM GAS 5hp HONDA 14.6
CFM 125 PSI 8 GAL I-R
COMPRESSOR AIR 70 CFM GAS X-AIR SC70 100
PSI HONDA GAS 300 LBS
AIR DRILL 30-40 LBS I-R JRD30 / SULLIVAN
MRD40
AIR DRILL 60 LBS I-R JH40 / SULLIVAN MRD50
FREIGHT MAY APPLY DEPENDING ON RENTAL LENGTH
OVERTIME HOURS MAY APPLY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
22
AIR EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
3,000LBS SHORT / LONG DRUM
$136.00
$600.00
$1,420.00
4,000LBS SHORT / LONG DRUM
$150.00
$635.00
$1,910.00
5,000LBS SHORT / LONG DRUM
$250.00
$975.00
$3,140.00
10,000LBS SHORT DRUM
$325.00
$1,350.00
$4,055.00
$50.00
$195.00
$445.00
1/4" X 50'
$7.00
$14.00
$28.00
1/4" X 100'
$14.00
$28.00
$56.00
3/8" X 50'
$7.00
$19.00
$38.00
3/8" X 100'
$14.00
$38.00
$76.00
3/8" X 25'
$3.50
$7.00
$14.00
½" X 50'
$7.00
$20.00
$40.00
1/2" X 100'
$14.00
$40.00
$80.00
3/4" X 25'
$7.00
$15.00
$30.00
3/4" X 50'
$8.00
$20.00
$40.00
3/4" X 100'
$16.00
$40.00
$80.00
1" X 25'
$7.00
$25.00
$75.00
1" X 50'
$15.00
$48.00
$144.00
1" X 100'
$15.00
$60.00
$180.00
2” X 100’
$30.00
$100.00
$250.00
HOSE WHIP CHECK FOR 1/2" TO 1-1/4" HOSE
$2.50
$4.50
$9.00
HOSE WHIP CHECK FOR 1 -1/2" TO 3" HOSE
$2.50
$5.00
$10.00
AIR BLOWPIPE C/W BALL VALVE & FITTING
$10.00
$30.00
$90.00
AIR TOOL INLINE LUBRICATOR
$5.00
$20.00
$60.00
AIR TUGGER
AIR TAMPER
POGO STICK I-R / ATP
AIR HOSE
** CABLES FOR TUGGERS SOLD SEPARATELY
FREIGHT MAY APPLY DEPENDING ON RENTAL LENGTH
OVERTIME HOURS MAY APPLY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
23
AIR TOOLS
Description
Hourly
Daily
Weekly
4 Weeks
AIR CHISEL
$15.00
$60.00
$120.00
AIR POP RIVETER 3/16”
$25.00
$75.00
$225.00
$5.00
$15.00
$45.00
AIR POP RIVETER
(1/4" SUNNEX 1819T POP RIVETER PNEUMATIC)
$50.00
$120.00
$360.00
3/8” DR AIR RATCHET
$15.00
$60.00
$120.00
3/8” DR AIR IMPACT
$15.00
$60.00
$120.00
1/2” DR AIR IMPACT
$20.00
$80.00
$240.00
3/4” DR AIR IMPACT
$30.00
$120.00
$350.00
1” DR AIR IMPACT
$75.00
$300.00
$860.00
1/4” AIR DRILL
$15.00
$60.00
$120.00
3/8” AIR DRILL
$20.00
$70.00
$145.00
1/2” AIR DRILL
$25.00
$80.00
$200.00
3/8" ANGLE AIR DRILL
$20.00
$80.00
$160.00
BAREMA 120 POINJAR ROCK DRILL
$125.00
$625.00
$1,875.00
WHEN USED FOR DRILLING 2”
$150.00
$750.00
$2,250.00
PORTABLE AIR TANK
$10.00
$40.00
$75.00
GRINDER 7" R/ANGLE 5/8 ARBOR
$25.00
$100.00
$300.00
FLOOR SCRABBLER AIR 5 HEAD
(MACDONALD 45)
$175.00
$550.00
$1,650.00
$80.00
$320.00
$960.00
RIGHT ANGLE EXT. FOR 3/16”
HOLE OR BIGGER
PNEUMATIC AIR POST DRIVER
LEGEND
Sharpening Charge
** For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
** For H Thread & Rope Thread Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
24
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
AUGERS
Description
Hourly
Daily
Weekly
4 Weeks
SOIL
EARTH AUGER (HAND)
$10.00
$30.00
$72.00
EARTH AUGER - GAS
$75.00
$300.00
$600.00
$10.00
$40.00
$120.00
1 FT. EXTENSION
$1.00
$4.00
$12.00
2 FT. EXTENSION
$2.00
$8.00
$24.00
4 FT. EXTENSION
$4.00
$16.00
$48.00
$15.00
$60.00
$180.00
$35.00
$145.00
$450.00
$10.00
$30.00
$60.00
C/W 1 AUGER 6”,8”,10” OR 12” FLUTE
EXTRA AUGER FLUTES
36” FLUTED AUGER EXTENSION
ICE
POWER HEAD ICE AUGER (HUSH226AI25)
CARRY CASE 24"L x 19"W x 13"D (FOR POWER
HEAD) EXTRA COST
HUSQ ICE AUGER C/W 4”, 5”, 6”,8”,OR 10” FLUTE
$40.00
$160.00
$480.00
EXTRA AUGER FLUTES: 4”, 5”, 6”, 8” OR 10”
$5.00
$15.00
$30.00
AUGER EXTENSIONS 12”
$5.00
$12.50
$25.00
AUGER EXTENSIONS 20”
$5.00
$15.00
$30.00
$15.00
$60.00
$180.00
$5.00
$15.00
$45.00
WEEKEND SPECIAL
Friday Evening to Monday 9:00am
ICE AUGER – GAS C/W 6”, 8” OR 10” FLUTE
$60.00
12” EXTENSIONS
$4.00
20” EXTENSIONS
$5.00
DUTCH STONY SOIL SAMPLER (HAND) 2-1/2” DIA
SAMPLER EXTENSION
*ALSO SEE LOADERS SKID-STEER ATTACHEMENTS*
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
25
AUTO TOOLS AND SHOP EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
BALL JOINT PRESS
BALL JOINT SOCKET (CHRYSLER)
$25.00
$10.00
$100.00
BATTERY CHARGER
BATTERY CHARGER -TICKLER 10AMP
$15.00
$6.00
$40.00
$18.00
$100.00
$54.00
BOLT CUTTER 24”
$10.00
$40.00
$120.00
BOLT CUTTER 36”
$15.00
$50.00
$150.00
BOLT CUTTER 48”
$20.00
$80.00
$240.00
BOOSTER CABLES
$5.00
$20.00
$50.00
CABLE CRIMPER (SWAGER) FOR WIRE ROPE
SIZE: 1/8”, 3/16” OR ¼”
$20.00
$60.00
$180.00
CLUTCH ALIGN TOOL
$10.00
$40.00
$120.00
COMPRESSION TESTER
$25.00
$40.00
$120.00
CYLINDER DEGLAZER
$10.00
$40.00
$120.00
CYLINDER HONE
$40.00
$120.00
DRILL PRESS
$35.00
$140.00
$420.00
ENGINE CRANE
$50.00
$200.00
$420.00
ENGINE STAND
$15.00
$48.00
$144.00
FLARING TOOL
$10.00
$40.00
$120.00
HELI COIL KIT (COILS ARE AN EXTRA CHARGE)
$25.00
MASTER HEAT GUN - (2000 WATTS) 1000f
$20.00
OIL PRESS GAUGE
$20.00
PISTON RING COMPRESSOR
$12.00
$48.00
PULLERS
PULLER - AXLE
$25.00
$25.00
$50.00
$80.00
RIDGE REAMER
$20.00
$80.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$80.00
26
AUTO TOOLS AND SHOP EQUIPMENT
Description
Hourly
RIVETER - AIR OPERATED POP 3/16
RIVETER - RIGHT ANGLE EXTENSION FOR 3/16
RIVETER - AIR 1/4
RIVETER - BIG DADDY POP
RIVETER - HAND OPERATED POP
Daily
Weekly
4 Weeks
$25.00
$5.00
$50.00
$25.00
$75.00
$15.00
$120.00
$75.00
$225.00
$45.00
$360.00
$150.00
$5.00
$20.00
$60.00
$5.00
$20.00
SLIDE HAMMER
$20.00
$80.00
SNOWMOBILE TRACK CHIP TOOL
$20.00
$80.00
SOCKET SET 1/2" DR DEEP (1/2" - 1")
SOCKET SET 1/2" DR SHALLOW (7/16"- 1 1/4")
SOCKETS - AXLE NUT
SOCKETS - INDIVIDUAL
$15.00
$20.00
$5.00
$5.00
$60.00
$80.00
$20.00
$20.00
$180.00
$240.00
SUSPENSION SPRING COMPRESSOR
$20.00
$60.00
$180.00
TIMING LIGHT- 12 VOLT DIGITAL
TIMING LIGHT- 12 VOLT STD
$20.00
$10.00
$80.00
$40.00
$240.00
$120.00
TORQUE WRENCHES
1/2” DRIVE 0-150 FEET POUND
1/2" DRIVE PRECISION 50-250 FEET
POUND
1/4" DRIVE 40-200 INCH POUND
3/8” DRIVE 0-100 FEET POUND
3/8” DRIVE 0-200 INCH POUND
3/4” DRIVE 100-600FT LBS PROTEC
$20.00
$20.00
$45.00
$90.00
$25.00
$60.00
$100.00
$20.00
$20.00
$20.00
$50.00
$45.00
$45.00
$45.00
$100.00
$90.00
$90.00
$90.00
$225.00
VALVE SPRING COMPRESSOR
$10.00
$40.00
$120.00
$40.00
$160.00
$480.00
$50.00
$200.00
$600.00
SAFETY STANDS
PORTABLE HYDRAULIC PIPE EXPANDER
1 ½”, 1 ¾”, 2 ¼”, 2 ½”, 3”
PORTABLE HYDRAULIC PIPE EXPANDER
3 ½”, 4”, 5”
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
27
CARPENTRY TOOLS
Description
Hourly
Daily
Weekly
4 Weeks
BLACK & DECKER 3 1/4” PLANER
$20.00
$80.00
$240.00
4” JOINTER
$12.00
$35.00
$100.00
1/4” ROUTER
C/W 1 STANDARD BIT
$15.00
$45.00
$110.00
MAKITA NIBBLER
MAKITA SHEAR
$25.00
$25.00
$80.00
$80.00
$240.00
$240.00
CHAINS & BOOMERS
Description
Daily
Weekly
4 Weeks
3/8" x 20ft TRANSPORT CHAIN
Hourly
$8.00
$24.00
$48.00
BOOMERS
$8.00
$24.00
$48.00
HERC STRAP 2” x 30ft
$8.00
$24.00
$48.00
COME ALONGS / CHAIN FALLS / TIRFORS
Description
Hourly
Daily
Weekly
4 Weeks
COME ALONG W/ 1/4 CABLE 1000/2000 lbs
$10.00
$30.00
$80.00
COME ALONG W/ 3/8 CABLE 1700/3400 lbs
$15.00
$45.00
$125.00
COME ALONG 3/4 TON CHAIN TYPE 5ft FALL
$35.00
$50.00
$95.00
COME ALONG 1 TON CHAIN TYPE 5-10ft FALL
$45.00
$65.00
$155.00
COME ALONG 1 1/2 TON CHAIN TYPE 5-10ft FALL
$45.00
$65.00
$155.00
COME ALONG 2 TON CHAIN TYPE 5-10ft
$50.00
$100.00
$205.00
TIRFOR 1500LBS LIFT
$35.00
$100.00
$250.00
TIRFOR 3000LBS LIFT (T13)
$40.00
$120.00
$350.00
TIRFOR 6000LBS LIFT (T35)
$45.00
$135.00
$400.00
$5.00
$20.00
$60.00
FENCE PULLER
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
28
COME ALONGS / CHAIN FALLS / TIRFORS
SPREADER BAR ADJUSTABLE
5TON SPREAD 60-120” 475LBS
$75.00
$400.00
$1200.00
SPREADER BAR ADJUSTABLE
7TON SPREAD 72-144” 755LBS
$75.00
$400.00
$1200.00
Daily
Weekly
4 Weeks
TAMPER RAMMERS
TAMPER RAMMER (JUMPING JACK TAMPER) 2
CYCLE, 4 CYCLE, OIL INJECTED. APPROX 83 KG
185 LBS, MIKISA, I-R, BOMAG, DYNAPAC
$70.00
$280.00
$840.00
TAMPER RAMMER DIESEL MIKASA (MT-76D)
$90.00
$400.00
$1080.00
$9.85
$40.00
$118.00
$60.00
$240.00
$720.00
PLATE TAMPER DIESEL 750 LBS 24" x 34" MIKASA
MVH304 / MVH306 CERT FORCE 8820 LBS
$125.00
$500.00
$1,500.00
PLATE TAMPER DIESEL 1000 LBS 28" x 35"
MIKASA MVH402 / DYNAPAC LH500 CERT FORCE
12400LBS
$185.00
$730.00
$2,200.00
PLATE TAMPER DIESEL 1200 LBS 28" x 35"
MIKASA MVH502 CERT FORCE 14000LBS
$200.00
$800.00
$2,400.00
PLATE TAMPER DIESEL 2000 LBS 24" x 36"
DYNAPAC LH700
$300.00
$1,200.00
$3,600.00
VIBRATOR WALK BEHIND DOUBLE ROLLER GAS
MIKASA MR-8G 850 KG 1870 LBS 27"
$125.00
$460.00
$1,380.00
VIBRATOR WALK BEHIND DOUBLE ROLLER
DIESEL BOMAG BW755LE 30" OR MIKASA
MDR9-DYE 28"
$180.00
$720.00
$2,160.00
*CABLE FOR TIFORS SOLD SEPERATELY*
COMPACTION
Description
Hourly
8" TAMPING FOOT
PLATE TAMPERS
PLATE TAMPER GAS 200 LBS 20"x 22" 90 KG 196
LBS, MIKASA MVC-90L, I-R, BOMAG
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
29
COMPACTION
Description
Hourly
Daily
Weekly
4 Weeks
$235.00
$920.00
$2,705.00
$50.00
$195.00
$445.00
$430.00
$475.00
$1,700.00
$1,850.00
$5,050.00
$5,350.00
$3.00
$12.00
$36.00
Daily
Weekly
4 Weeks
$30.00
$120.00
$270.00
$100.00
$400.00
$1,000.00
$95.00
$285.00
$855.00
$95.00
$285.00
$855.00
$150.00
$500.00
$1500.00
MIKASA CONCRETE VIBRATOR-2 H.P.
C/W 3 METER SHAFT
CHOICE FO HEADS: 1 1/4” X 16” OR 2” X 13”
$50.00
$150.00
$450.00
MIKASA CONCRETE VIBRATOR-3H.P.
C/W 3 METER SHAFT
CHOICE OF HEADS: 1 1/4” X 16” OR 2” X 13”
$75.00
$225.00
$575.00
$8.00
$16.00
$32.00
$70.00
$280.00
$625.00
VIBRATOR WALK BEHIND DOUBLE ROLLER
DIESEL BOMAG BW90SLE 36"
I/R 441A2 POGO STICK TAMPER AIR
47LBS DIAMETER 5-3/4”
APT M131 37LBS DIAMETER 6”
54" SMOOTH RIDE ON DIESEL 11000 LBS SD45
54" PAD FOOT RIDE ON 11000 LBS DIESEL SD45
SMALL CEMENT TROWEL
CONCRETE EQUIPMENT
Description
Hourly
BELLE ELECTRIC PORTABLE CEMENT MIXER
MODEL (WC-SB4E) 4.3 CU FT
CEMENT MIXER 9 CU. FT., 985LBS CROWN C9C
9HP ROBIN 1+ BAG CAPACITY (GAS)
MORTER MIXER 8 CU. FT. STEEL DRUM CROWN
(GAS)
MORTER MIXER 8 CU. FT. STEEL DRUM
(ELECTRIC) 115-240V
CEMENT MIXER 12 CU. FT. (STONE) 1 1/2 – 2 BAG
900lbs
3 METER EXTENSION FOR CONCRETE
VIBRATOR
WHITEMAN 36” POWER TROWEL
MODEL: J-4-4R
C/W COMBINATION BLADES OR
FLOAT & FINISH BLADES
*CLEANING CHARGE OF $120.00/HR IF
REQUIRED
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
30
CONCRETE EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
BARTELL 46" POWER TROWEL
C/W COMBINATION BLADES OR
FLOAT & FINISH BLADES
*CLEANING CHARGE OF $120.00/HR IF
REQUIRED
$80.00
$320.00
$714.00
BULL FLOAT 48” C/W HANDLE
EXTRA 6" HANDLE EXTENDSION
$20.00
$2.50
$50.00
$10.00
$150.00
$30.00
$20.00
$80.00
$240.00
$10.00
$40.00
$120.00
$150.00
$600.00
$1,800.00
SMALL EDGER
$3.00
$12.00
$36.00
MAGNESIUM FLOAT
$5.00
$20.00
$60.00
SMALL CEMENT TROWEL
SQUARE, POINTED
$3.00
$12.00
$36.00
$65.00
$260.00
$780.00
$50.00
$60.00
$200.00
$240.00
$600.00
$720.00
RUBY TILE CUTTER
WHEEL BARROW
WHEEL BARROW GAS POWERED (BELLE)
TILE SAW
BLADE CHARGE: NEW BLADE
0.275/THOUSAND/INCH USEABLE
0.60/ 0.001 THOUSAND/INCH
NEW MEASURES .580"
DEAD MEASURES .305"
MINIMUM BLADE CHARGE $20.00
USE FLK772494 10" BLADE
POWER SCREED (WACKER / CROWN)
c/w 8' SCREED
c/w 12' SCREED
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
31
CONCRETE EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
$75.00
$300.00
$1,000.00
HILTI DD130 HAND HELD CORE DRILL 1"- 6"
CAPACITY
$100.00
$400.00
$1,200.00
HILTI DD150 HAND HELD CORE DRILL
$150.00
$600.00
$1,800.00
HILTI DD130 VACUUM PUMP
$20.00
$80.00
$120.00
HILTI DD130 HAND HELD CORE DRILL STAND
HILTI DD150 HAND HELD CORE DRILL STAND
$20.00
$20.00
$80.00
$80.00
$120.00
$120.00
$5.00
$20.00
$60.00
PORTABLE PUMP WATER BOTTLE
$10.00
$40.00
$80.00
HILTI MD2000 (00252401) EPOXY GUN H.I.T.
SYSEM
MANUAL DISPENSER
$20.00
$60.00
$180.00
MD1000 H.I.T. ICE DISPENSER KIT EPOXY GUN
* EPOXY SOLD SEPARATE:
HILTI H.I.T. - HIL00371957 HY150 OR
HILTI H.I.T. ICE - HIL00371292 HY500
$20.00
$60.00
$180.00
$175.00
$550.00
$1,650.00
STOW PR200CVS520L CORING MACHINE
C/W 3 - POWER CHORDS
1 - VACUUM SEAL
*RECOMMEND MIN 5000W GENERATOR
CORE DRILL EXTENDSIONS & ADAPTORS
FLOOR SCRABBLER AIR 5 HEAD
(MACDONALD 45)
STIFF BACK SPIDER
$1.50
CAM LOCK BRACKET
$1.50
SURFACE PLANER SCARIFIER
5HP HONDA GAS
GENERAL SP8 (HEAD WEAR EXTRA)
$100.00
$400.00
$600.00
GENERAL SP8-6200
FAIL KIT HEAD
$150.00
$450.00
$1200.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
32
CONSTRUCTION EQUIPMENT
Description
Hourly
TARPS
24’ X 12’ X 1/2”
PARACHUTE 100ft
Daily
Weekly
4 Weeks
N/A
$20.00
$40.00
$100.00
$200.00
$400.00
$10.00
$40.00
$120.00
$150.00
$600.00
$1,800.00
For every Rip or Nail Hole $5.00 to $10.00 Charge
WHEEL BARROW
WHEEL BARROW GAS POWERED
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
CLEANING CHARGES EXTRA
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
33
DIAMOND PRODUCTS
Description
Hourly
Daily
Weekly
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
4 Weeks
BLADE RENTAL
4 1/2" DRY CUTTING BLADE
.30/THOU $10.00MIN.
9” DOUBLE BLADE FOR CUT ‘N’ BREAK
$3.75/THOU $40.00 MIN.
10" CUTTING BLADE
$3.00/THOU $30.00 MIN.
9” CUT ‘N’ BREAK BLADE
$60.00/THOU $60.00 MIN
12" CUTTING BLADE
$3.75/THOU $40.00 MIN.
14" CUTTING BLADE
$3.75/THOU $40.00 MIN.
16" CUTTING BLADE
$7.00/THOU $50.00 MIN.
18" CUTTING BLADE
$8.00/THOU $50.00 MIN.
20" CUTTING BLADE
$8.00/THOU $50.00 MIN.
5" DOUBLE ROW DIAMOND CUP
$3.40/THOU $40.00 MIN.
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
34
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DIAMOND PRODUCTS
Description
Hourly
Daily
Weekly
4 Weeks
1/4" - 1 1/2" BP1500 PREMIUM BIT
(MIN. WEAR CHARGE $25.00 OR $1.50/THOU)
$10.00
$25.00
$75.00
2" BP2000 PREMIUM BIT
(MIN WEAR CHARGE $25.00 OR $1.75/THOU)
$10.00
$25.00
$75.00
2 1/2" BP2500 PREMIUM BIT
(MIN. WEAR CHARGE $25.00 OR $1.75/THOU)
$10.00
$25.00
$75.00
3" BP3000 PREMIUM BIT
(MIN. WEAR CHARGE $25.00 OR $2.25/THOU)
$20.00
$80.00
$240.00
3 1/2" BP3500 PREMIUM BIT
(MIN. WEAR CHARGE $25.00 OR $2.50/THOU)
$20.00
$80.00
$240.00
4" BP4000 PREMIUM BIT
(MIN. WEAR CHARGE $25.00 OR $3.00/THOU)
$20.00
$80.00
$240.00
4.25" BP5000 PREMIUM BIT
(MIN. WEAR CHARGE $25.00 OR $4.25/THOU)
$20.00
$80.00
$240.00
6" CORE BIT (MIN. WEAR CHARGE $25.00 OR
$5.35/THOU)
$20.00
$80.00
$240.00
8" CORE BIT (MIN. WEAR CHARGE $25.00 OR
$6.00/THOU)
$20.00
$80.00
$240.00
10" CORE BIT (MIN. WEAR CHARGE $25.00 OR
$8.93/THOU
$20.00
$80.00
$240.00
12" PREMIUM BIT (MIN. WEAR CHARGE $30.00
OR $9.00/ THOU
$20.00
$80.00
$240.00
10” DIAMOND ROTARY GRINDING CUP
20 SEGMENTS USED WITH RG2112
(MIN WEAR CHARGE $50.00 OR $5.00/THOU)
$20.00
$80.00
$240.00
CORESPLITTER
PLUS BLADE
$75.00
$225.00
$650.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
CORE BIT RENTAL
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
35
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILLS AND GRINDERS
Description
Hourly
Daily
Weekly
4 Weeks
ECHO 2 CYCLE 1/2" REVERSE DRILL
$35.00
$75.00
$250.00
1/4” AIR OPERATED DRILL
$12.50
$50.00
$100.00
1/2” AIR OPERATED DRILL
$15.00
$60.00
$120.00
MAKITA DRILL-1/2” ELECTRIC (MAK6013BR)
WITH ANGLE HEAD
$15.00
$20.00
$60.00
$80.00
$150.00
$240.00
$5.00
$15.00
$45.00
3/8” MAKITA CORDLESS DRILL REV.
C/W SCREW BITS
$10.00
$30.00
$90.00
3/8” REVERSIBLE DRILL
$10.00
$30.00
$90.00
24V CORDLESS DRILL METABO 00190
$50.00
$200.00
$600.00
36V HILTI TE6-A CORDLESS KIT
$85.00
$255.00
$765.00
DRYWALL SCREW GUN
C/W 1 SCREWDRIVER BIT
$10.00
$32.00
$95.00
4” ANGLE GRINDER (MAKITA)
4" 1/4 METABO
$12.00
$15.00
$48.00
$50.00
$144.00
$150.00
7” ANGLE GRINDER (B & D)
$20.00
$80.00
$240.00
MAKITA ELECTRIC NIBBLER 16ga JN1601
MAKITA ELECTRIC SHEAR
$25.00
$25.00
$80.00
$80.00
$240.00
$240.00
ROTARY HAMMER 1" PISTOL GRIP METABO
C/W 1 DRILL BIT 5/32-3/4”
COMPACT MODEL BHE20
$40.00
$140.00
$420.00
ROTARY HAMMER 1 1/2” (TE25)
C/W PUNCH &
CHISEL OR 1 DRILL BIT (MULTI FIT)
$50.00
$200.00
$600.00
ROTARY HAMMER 2” (TE76 - TE80)
C/W 1 PUNCH & CHISEL OR 1 DRILL BIT
$60.00
$240.00
$720.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
CORDLESS SCREWDRIVER L.
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
36
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILLS AND GRINDERS
Description
Hourly
Daily
Weekly
4 Weeks
HILTI TE905 ELECTRIC BREAKER C/W PUNCH OR
CHISEL
$60.00
$240.00
$720.00
HILTI TE1500 ELECTRIC BREAKER C/W PUNCH
OR CHISEL
$75.00
$300.00
$900.00
ELECTRIC BREAKER 60 LBS (BOSCH BRUTE /
HILTI TE3000)
C/W PUNCH & CHISEL
EXTRA DRILL BIT SDS PLUS
$80.00
$320.00
$960.00
$3.00
$12.00
$25.00
EXTRA DRILL BIT SDS MAX UP TO 1"
EXTRA DRILL BIT SDS MAX (MULTI FIT) 1" +
12” DRILL BIT EXTENSIONS
WOOD AUGER BIT
$6.00
$20.00
$6.00
$6.00
$24.00
$60.00
$24.00
$24.00
$72.00
$180.00
$72.00
$50.00
CLAY SPADE
$10.00
$40.00
$120.00
AIR ROCK DRILL 30-40 LBS CLASS (CIRJRD30 /
SULLAIRMRD40)
$60.00
$200.00
$550.00
AIR DRILL 60LBS I-RJ440 / SULLAIR MRD50
2” CARBIDE TIP CORING BIT
4” CARBIDE TIP CORING BIT
5” CARBIDE TIP CORING BIT
CHISEL *
POINT *
$66.00
$20.00
$20.00
$25.00
$5.00
$5.00
$230.00
$80.00
$80.00
$100.00
$10.00
$10.00
$665.00
$240.00
$240.00
$300.00
$30.00
$30.00
$5.00
$10.00
$15.00
DRILL PRESS
$35.00
$140.00
$420.00
1/2” ELECTRIC IMPACT
3/4" ELECTRIC IMPACT
1" ELECTRIC IMPACT
$15.00
$25.00
$66.00
$60.00
$100.00
$198.00
$180.00
$221.00
$594.00
GAS POWERED REVERSIBLE DRILL 1/2"
$30.00
$90.00
$270.00
$140.00
$200.00
$700.00
$1000.00
$2000.00
$2500.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
Chipped or Broken Teeth $20.00/ea
CENTER BIT FOR CARBIDE BIT
BAREMA 120 POINJAR ROCK DRILL
WHEN USED FOR DRILLING 2” HOLE OR BIGGER
(EXTRA FOR STEEL & BITS)
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
37
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILLS AND GRINDERS
Description
Hourly
Daily
Weekly
4 Weeks
$3.00
$4.00
$5.00
$6.00
$6.00
$12.00
$12.00
$16.00
$20.00
$24.00
$24.00
$48.00
$36.00
$48.00
$60.00
$72.00
$72.00
$141.00
$150.00
$9.00
$10.00
$10.00
$8.00
$12.00
$18.00
$28.00
$30.00
$30.00
$32.00
$36.00
$54.00
$85.00
$90.00
$90.00
$96.00
$108.00
$162.00
ROPE STEEL
18” X 1” ROPE STEEL R 25
2’ X 1” ROPE STEEL R25
48” X 1” ROPE STEEL R 25
$5.00
$8.00
$10.00
$20.00
$32.00
$40.00
$60.00
$96.00
$120.00
6’ X 1” ROPE STEEL R 25
8’ X 1” ROPE STEEL R 25
10’ X 1” ROPE STEEL R 25
$12.00
$14.00
$16.00
$36.00
$42.00
$48.00
$108.00
$126.00
$144.00
$5.00
$5.00
$5.00
$10.00
$10.00
$10.00
$30.00
$30.00
$30.00
$3.00
$3.00
$4.00
$15.00
$10.00
$10.00
$12.00
$50.00
$30.00
$30.00
$30.00
$150.00
MAGNETIC BASE DRILL 1 1/2” CAPACITY
HOUGEN (HMD904) C/W 1/2" DRILL CHUCK
$100.00
$300.00
$900.00
HOUGEN HMD914 2 1/16” CAPACITY
$110.00
$330.00
$1000.00
TAPER DRILL STEEL / H - THREAD
12”
18”
24”
36”
48”
96”
12’ STEEL
CHISEL DRILL STEEL *
12”
16”
24”
48”
72”
96”
CHISEL BREAKER
POINT BREAKER
GROUND ROD DRIVER
CROSS BITS **
1-1/4” TAPER
1-3/8” TAPER
1-1/2” TAPER
2” ROPE THREAD BIT ***
PILOTS
1" OR 2" DEEP BITS ANNULAR CUTTER
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
$20.00
38
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILLS AND GRINDERS
Description
Hourly
Daily
Weekly
4 Weeks
$25.00
$75.00
$150.00
$5.00
$20.00
$60.00
$75.00
$300.00
$1,000.00
$150.00
$600.00
$1800.00
$45.00
$150.00
$400.00
HILTI HAND HELD CORE DRILL
(DD150) 1" - 6" CAPACITY
$100.00
$150.00
$400.00
$600.00
$1,200.00
$1,800.00
HILTI (DD130) VACUUM PUMP
(DD150)
$20.00
$20.00
$80.00
$80.00
$120.00
$120.00
HILTI (DD130) DRILL STAND
(DD150)
$20.00
$20.00
$80.00
$80.00
$120.00
$120.00
PORTABLE WATER PUMP BOTTLE FOR CORE
DRILLS
$10.00
$40.00
$80.00
CORE BIT ADAPTORS & EXTENSIONS
$5.00
$20.00
$60.00
½” KWIK LOC CLAMP HOLD DOWN
$5.00
$10.00
$25.00
5/8” KWIK LOC CLAMP
$5.00
$10.00
$25.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
HOUGEN 3-12” PIPE ADAPTER STAND
ADAPTER SDS MAX TO SDS PLUS (MET23371)
STOW PR200CVS520L
CORING MACHINE
C/W 3 - POWER CORD
1- VACUUM SEAL
*RECOMMEND MIN 5000W GENERATOR
HILTI DD200 CORE RING 1-10” CAPACITY (DRILL
& STAND)
CORE DRILL MOTOR SPACER FOR LARGER
THAN 10” BITS – DD – HD30
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
39
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILLS AND GRINDERS
Description
Hourly
Daily
Weekly
4 Weeks
$20.00
$20.00
$60.00
$60.00
$180.00
$180.00
$35.00
$90.00
$180.00
$100.00
$400.00
$1200.00
Daily
Weekly
4 Weeks
$3.00
$4.00
$5.00
$6.00
$12.00
$12.00
$16.00
$20.00
$24.00
$48.00
$36.00
$48.00
$60.00
$72.00
$141.00
$3.00
$4.00
$5.00
$6.00
$12.00
$16.00
$20.00
$24.00
$36.00
$48.00
$60.00
$72.00
$3.00
$4.00
$5.00
$6.00
$15.00
$18.00
$20.00
$12.00
$16.00
$20.00
$24.00
$48.00
$54.00
$80.00
$36.00
$48.00
$60.00
$72.00
$144.00
$162.00
$240.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
DISPENSERS / CAULKING GUNS
HILTI MD-1000 HILTI ICE
HILTI MD-2000 HILTI HIT
MAGNETIC LOCATOR (DETECTOR)
101 MANGNA TRACK / CST C/W CASE & MANUAL
HILTI DDEC-1 CORE DRILL
DRILL STEEL & BITS
Description
Hourly
TAPER DRILL STEEL
12”
18”
24”
48”
96”
DRILL STEEL ROPE THREAD R25
12”
16”
24”
48”
DRILL STEEL H THREAD
12”
16”
24”
48”
72”
96”
120”
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
40
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILL STEEL & BITS
Description
Hourly
Daily
Weekly
4 Weeks
CHISEL DRILL STEEL *
12”
16”
24”
48”
96”
$9.00
$10.00
$10.00
$12.00
$18.00
$28.00
$30.00
$30.00
$36.00
$54.00
$85.00
$90.00
$90.00
$108.00
$162.00
CROSS BITS **
1-1/4” TAPER
1-3/8” TAPER
1-1/2” TAPER
2” ROPE THREAD BIT
$3.00
$3.00
$4.00
$15.00
$10.00
$10.00
$12.00
$50.00
$30.00
$30.00
$30.00
$150.00
1-1/4” H THREAD
1-3/8” H THREAD
1-1/2” H THREAD
2”
H THREAD
$3.00
$3.00
$4.00
$15.00
$10.00
$10.00
$12.00
$50.00
$30.00
$30.00
$30.00
$150.00
CLAY SPADE
$5.00
$20.00
$65.00
ASPHALT CUTTER
$5.00
$20.00
$65.00
WEDGE & FEATHER 12”
$5.00
$20.00
$65.00
POINT BREAKER
$5.00
$20.00
$65.00
CHISEL BREAKER
$5.00
$20.00
$65.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
41
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
DRILL STEEL & BITS
Description
Hourly
AIR BLOW PIPE
AIR TOOL OILER Lubricator
AIR HOSE
1/4” X 50’
3/8” X 50’
3/8” X 25’
½” X 50’
3/4” X 25’
3/4” X 50’
3/4” X 100’
1” X 25’
1” X 50’
1” X 100’
SDS FLOOR SCRAPER HILTI (CUSTOMER MUST
BUY BLADE)
ADAPTER SDS MAX TO SDS PLUS
LEGEND
Sharpening Charge
* For All Bits, Steels, Points, Chisel, Spades & Cutters
** For Cross Bits
*** For Button Bit (per bit)
DAY = 8 hrs
WEEK = 40 hrs
Daily
Weekly
4 Weeks
$10.00
$30.00
$90.00
$5.00
$20.00
$60.00
$7.00
$7.00
$3.50
$18.00
$5.00
$5.00
$10.00
$7.00
$15.00
$15.00
$14.00
$14.00
$7.00
$72.00
$10.00
$20.00
$40.00
$25.00
$48.00
$60.00
$28.00
$28.00
$14.00
$75.00
$144.00
$180.00
$20.00
$80.00
$240.00
$5.00
$20.00
$60.00
UNDER 2"
$15.00
$25.00
$40.00
2" & OVER
42
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$35.00
$50.00
ELECTRICAL
Description
Hourly
Daily
Weekly
4 Weeks
50 FT. LIGHT DUTY 110 VOLT
$5.00
$15.00
$30.00
100FT LIGHT DUTY 110 VOLT
$10.00
$30.00
$60.00
50 FT HEAVY DUTY 110 VOLT
$7.00
$21.00
$42.00
100 FT HEAVY DUTY 110 VOLT
$14.00
$42.00
$96.00
100 FT HEAVY DUTY 220 VOLT
$14.00
$42.00
$96.00
FULL POWER CORD 30A
4X4 RECEPTACLE
$15.00
$50.00
$150.00
$5.00
$15.00
$45.00
1/2” CONDUIT BENDER
$10.00
$20.00
$60.00
3/4” CONDUIT BENDER
$10.00
$20.00
$60.00
SPLITTER CORD 120V-30A.
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
43
EXCAVATORS
Description
Hourly
Daily
Weekly
4 Weeks
K008 2000lbs DIGS 6FT 12L FUEL CAP (KUBOTA)
$260.00
$1,000.00
$3,000.00
KX41 3600lbs DIGS 7' 8" 21L FUEL CAP (KUBOTA)
$275.00
$1,130.00
$3,200.00
U15 3530lbs DIGS 7’ 7” 18L FUEL CAP (KUBOTA)
$275.00
$1,130.00
$3,200.00
U17 3815lbs DIGS 7’ 7” 18L FUEL CAP (KUBOTA)
$275.00
$1,130.00
$3,200.00
U25 5625lbs DIGS 9’ 3” 28L FUEL CAP (KUBOTA)
$365.00
$1,600.00
$4,000.00
KX71 6300lbs DIGS 10ft 45L FUEL CAP (KUBOTA)
$365.00
$1,600.00
$4,000.00
KX91 7110lbs DIGS 10’ 5” 50L FUEL CAP (KUBOTA)
$375.00
$1,600.00
$4,000.00
U35 8025lbs 11ft DIG FUEL CAP 45L (KUBOTA)
$375.00
$1,600.00
$4,000.00
U55 12,720lbs DIGS11’ 10” 68L FUEL CAP
(KUBOTA)
$500.00
$2,000.00
$6,000.00
KX057-4 13,010lbs DIGS 12’ 8” 75L FUEL CAP
(KUBOTA)
$500.00
$2,000.00
$6,000.00
KX080 9 TON DIGS 15’ 115L FUEL CAP
(KUBOTA) 17,800.LBS
$600.00
$2400.00
$7200.00
DX140 14.3 TON DIGS 19’FT7”
235L FUEL CAP 14,000KG
C/W BLADE
$900.00
$3,055.00
$10,555.00
DX180 20 TON DIGS 20’FT
18,300KG 40,260LBS C/W BLADE
$975.00
$3,300.00
$12,000.00
$1,000.00
$3,500.00
$12,500.00
JOHN DEERE 200LC MAX DIG 19’7”
44,750LBS 20,298KG
32” SEMI GROUSER SHOES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
44
EXCAVATORS
Description
Hourly
Daily
Weekly
4 Weeks
BREAKERS
FOR K008
$300.00
$1,000.00
$3,000.00
FOR KX91 & U35
$305.00
$1,225.00
$3,700.00
FOR KX080
$350.00
$1,600.00
$4,600.00
EXTRA BUCKETS
BUCKET 8” (K008)
BUCKET 10” (K008)
BUCKET 12” (K008)
BUCKET (U35) E35 18-24”
BUCKET (U35) E35 12”
$20.00
$20.00
$20.00
$30.00
$20.00
$80.00
$80.00
$80.00
$120.00
$80.00
$240.00
$240.00
$240.00
$360.00
$240.00
BUCKET (K080)
BUCKET (K080)
BUCKET (K080)
BUCKET (K080)
$30.00
$30.00
$30.00
$30.00
$120.00
$120.00
$120.00
$120.00
$360.00
$360.00
$360.00
$360.00
FROST RIPPER (K080)
$55.00
$225.00
$665.00
BACKHOE LOADER DSL 410E 16,500lbs 15ft - 19ft
$600.00
$2,000.00
$5,500.00
KUBOTA KC120H DIESEL TRACK DUMPER
WEIGHT 1929LBS CAPACITY 2650LBS
$350.00
$1500.00
$4000.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
45
FANS
Description
Hourly
Daily
Weekly
4 Weeks
EN 20-SURE FLAME AIR MOVER 2’
$10.00
$40.00
$120.00
FN-30-SURE FLAME AIR MOVER 3’
$18.00
$72.00
$288.00
CARPET FAN
$18.00
$72.00
$288.00
12" ELECTRIC BLOWER FAN MANHOLE TYPE
*REQUIRES STD DUCT
$60.00
$160.00
$480.00
DUCTING FOR MANHOLE 12" x 25ft
$18.00
$10.00
$72.00
$40.00
$288.00
$120.00
DX180 HD 36”
$18.00
$72.00
$288.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
46
FLOORING EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
SHOP VACS
SHOP VAC-STD (WET OR DRY)
$20.00
$80.00
$240.00
SHOPVAC H/D (WET OR DRY) HUSKY
$45.00
$135.00
$405.00
SHOP VAC WET / DRY HEPA FILTRATION HUSKY
(G5301) *FILTERS EXTRA COST*
$60.00
$240.00
$720.00
$5.00
$15.00
$30.00
CARPET KICKER
$12.00
$35.00
$120.00
CARPET EXTRACTOR HUSKY (HS144)
*C/W POWER HEAD (12" STEAM BRUSH)
10' HOSE & 3" UPHOLSTERY TOOL
$55.00
$165.00
$495.00
$100.00
$400.00
$1,200.00
LINO ROLLER
$20.00
$80.00
$120.00
FLOOR POLISHER AND BUFFER 110v
$10.00
$40.00
$120.00
SEAMING IRON
$20.00
$60.00
$120.00
FLOOR SANDERS
8" DRUM SANDER HIRETECH (HT8)
SQUARE BUFF SANDER 16"
7" DISC EDGER
$60.00
$60.00
$35.00
$230.00
$230.00
$125.00
$685.00
$685.00
$400.00
$60.00
$110.00
$230.00
$440.00
$685.00
$1,100.00
$150.00
$600.00
$1400.00
$60.00
$230.00
$685.00
SHOP VAC KIT
SANDIA SNIPPER HEATED CARPET EXTRACTOR
C/W HOSE & SUCTION PIPE
CP ORBITAL POLISHER, AIR
17" HUSKY FLOOR MAINTAINER 110v
*USED AS A SANDER / POLISHER
*USED AS A GRINDER
10” DUAL HEAD ELECTRIC FLOOR GRINDER 120v
20 AMP RG2112E
ROTARY HEAD EXTRA
17" - 20" 2 SPEED POLISHER / SCRUBBER 110v
HUSKY (R172VP / R20-2VP)
*NOTE* All Types of Sandpaper Available for Sale
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
47
FLOORING EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
$20.00
$40.00
$80.00
$20.00
$40.00
$80.00
$20.00
$40.00
$80.00
$110.00
$440.00
$1100.00
$35.00
$105.00
$315.00
SURFACE PLANER SCARIFIER
GAS 5HP HONDA GENERAL SP8
$100.00
$200.00
$600.00
HEAD FAIL KIT
GENERAL SP8-6200
$150.00
$450.00
$1200.00
GENERAL WALK BEHIND RIP ‘N’ STRIP
BLADES EXTRA
$65.00
$250.00
$685.00
GENERAL HAND-HELD RIP ‘N’ STRIP
BLADES EXTRA
$45.00
$160.00
$365.00
VACUUM PUMP (AUTOMOTIVE A/C TYPE)
$20.00
$100.00
$350.00
FLOOR MAINTAINER
SANDPAPER HOLDER VELCRO BACK UP PLATE
SAND PAPER / SAND SCREEN WOOL BACK UP
PLATE (CLK450212)
STONE BLOCK HOLDER BACK UP PAD
FOR REMOVAL OF
PAINT, GLUE, EPOXY ON CONCRETE FLOORS
CARBIDE HEX PLATE (HEX17) *FOR HUSKY
FLOOR MAINTAINER
*REPLACEMENT CARBIDES $20.00 EACH
*REPLACEMENT PIN / CARBIDE ASSY $60.00
EACH
* CUSTOMER RESPONSIBLE FOR BROKEN /
BENT PINS & CARBIDES
* WEIGHTS AVAILABLE FOR MORE
AGGRESSIVE WORK
PAM SURE SHOT SCREW GUN
**NOTE: ALL RIP ‘N’ STRIP BLADES CARRY AN EXTRA CHARGE**
*NOTE* All Types of Sandpaper Available for Sale
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
48
FORKLIFTS
Description
Hourly
Daily
Weekly
4 Weeks
TOYOTA FORKLIFT 3000LBS CAPACITY
240" MAST LIFT HEIGHT (PROPANE / GAS)
PNEUMATIC TIRES
$225.00
$800.00
$2200.00
TOYOTA FORKLIFT 5000LBS CAPACITY
144” MAST LIFT HEIGHT (PROPANE/GAS)
PNEUMATIC TIRES
$250.00
$850.00
$2620.00
1/2 DAY
$350.00
$595.00
$2170.00
$6335.00
8000lbs 43-44ft DIESEL 4x4 (I-R / CARELIFT)
$350.00
$630.00
$2305.00
$6,720.00
9000lbs 43ft JLG
$400.00
$700.00
$2500.00
$7500.00
10,000lbs 54-55ft DIESEL 4x4 C/W OUTRIGGERS
(JLG / CARELIFT / GENIE)
$495.00
$895.00
$2,780.00
$8185.00
BUCKET FOR TELEHANDLER 95in 1.75yds
$40.00
$160.00
$450.00
MANBASKET QUICK ATTACH TYPE 10x4ft (JLG)
$75.00
$300.00
$900.00
MANBASKET PINION TYPE 10x4ft
$75.00
$300.00
$900.00
SPARE TIRE FOR TELEHANDLER
$45.00
$180.00
$400.00
TELEHANDLER (ZOOM BOOMS)
5500lbs 19ft DIESEL 4X4 (GENIE GTH5519)
ATTACHMENTS/PARTS
DELIVERY & PICK-UP CHARGES
TOYOTA FORKLIFT
HOURLY
$175.00
TELEHANDLER (ZOOM BOOMS)
$175.00
* ALL PRICES PLUS FUEL
* DELIVERY & PICKUP CHARGE APPLIES TO THESE UNITS
$175.00 EACH WAY (WITHIN CITY PROPER) BASED ON HOURLY RATE
* OVERTIME HOURS MAY APPLY
½ DAY RATE BASED ON 4 ½ HRS MAX. FROM TIME LEAVES YARD TO TIME RETURNED
(4 HRS ON METER)
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
49
GENERATORS
Description
Hourly
Daily
Weekly
4 Weeks
1000-1700 INVERTER GAS GENERATOR
APPROX 60 lbs
$30.00
$120.00
$360.00
2400/2800 WATT GAS POWERED GENERATOR
APPROX 105lbs
$30.00
$120.00
$360.00
3200 WATT INVERTER GAS GENERATOR
ROBIN RG3200IS
$50.00
$200.00
$600.00
3500/4100 WATT GAS POWERED GENERATOR
C/W POWER CORD ADAPTER WEIGHT DRY 55KG
125LBS
$40.00
$160.00
$550.00
5500/6100 WATT GAS POWERED GENERATOR
(ROBIN/WISCONSIN RGX4800) C/W POWER
CORD ADAPTER WEIGHT 75KGS 170LBS
$50.00
$200.00
$600.00
RGV 7500 WATT GAS POWERED GENERATOR
APPROX 210 lbs DRY
$75.00
$300.00
$900.00
3500/5000/6000 WATT DIESEL GENERATOR
PORTABLE ROBIN / BLADOR 220LBS DRY
WEIGHT
$85.00
$350.00
$995.00
7000 WATT DIESEL GENERATOR ENCLOSED
C/W FUEL TANK (KUBOTA GL7000 / WISPER
WATT 7000)
$100.00
$500.00
$1,200.00
8KW DIESEL GENERATOR ENCLOSED
C/W FUEL TANK
$110.00
$600.00
$1,500.00
$20.00
$40.00
$100.00
10-12KW DIESEL GENERATOR W/ SKID FRAME
APPROX 750 lbs *NO FUEL TANK*
$120.00
$500.00
$1,650.00
20KW DIESEL GENERATOR W/ SKID FRAME
WEIGHT 1310 lbs *NO FUEL TANK*
*RUNTIME ON 25 GAL FUEL TANK APPROX.
12HRS
$150.00
$650.00
$2,000.00
TRAILER FOR ABOVE 8KW GENERATOR
50
*Overtime Rates May Apply - Contact Order Desk
PLEASE SPECIFY REQUIRED VOLTAGE & PHASE FOR GENERATORS
SINGLE PHASE: 110, 127, 139, 240, 254, 277
THREE PHASE: 208, 220, 240, 415, 480, 600
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
GENERATORS
Description
Hourly
Daily
Weekly
4 Weeks
$200.00
$800.00
$2,500.00
$25.00
$60.00
$125.00
$225.00
$900.00
$2,500.00
G40 30KW DIESEL GENERATOR ENCLOSED W/
FUEL TANK & TRAILER (I-R G40)
$250.00
$1,000.00
$2,835.00
G70 70KW DIESEL GENSET ON TRAILER
$410.00
$1,605.00
$4,495.00
G80 80KW DIESEL GENERATOR ENCLOSED W/
FUEL TANK & TRAILER (I-R G80)
$450.00
$1,605.00
$4,695.00
G90 DSL GENSET ENCLOSED W/FUEL TANK
TRAILER
$510.00
$2000.00
$6000.00
G125 125KW DIESEL GEN SET
ENCLOSED ON TRAILER
$600.00
$2500.00
$7500.00
ELECTRICAL PANELS 1PH WALL MOUNT
$50.00
$150.00
$375.00
ELECTRICAL PANEL 3PH WALL MOUNT
$50.00
$150.00
$375.00
$200.00
$400.00
$75.00
$300.00
$900.00
$75.00
$300.00
$900.00
20KW DIESEL GENERATOR ENCLOSED W/ FUEL
TANK (FRONTIER / I-R / MULTIQUIP / SHIDAWA)
TRAILER FOR ABOVE 20KW GENERATOR
30KW DIESEL GENERATOR W/ SKID
*NO FUEL TANK*
ELECTRICAL PANEL CONSTRUCTION TYPE
SELF CONTAINED FOR OUTDOOR USE
TRANSFORMER 15-75 KVA
$55.00
TRANSFORMER 208-575 VOLTS
51
*Overtime Rates May Apply - Contact Order Desk
PLEASE SPECIFY REQUIRED VOLTAGE & PHASE FOR GENERATORS
SINGLE PHASE: 110, 127, 139, 240, 254, 277
THREE PHASE: 208, 220, 240, 415, 480, 600
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
GENERATORS / LIGHT PLANTS
Description
Hourly
Daily
Weekly
4 Weeks
$210.00
$775.00
$2,270.00
$230.00
$825.00
$2,435.00
14KW PORTABLE LIGHT TOWER
C/W 4 -1000W LIGHT
$255.00
$1,000.00
$3,000.00
20KW PORTABLE LIGHT TOWER
$385.00
$1,500.00
$4,415.00
LIGHT TOWERS (TRAILER MOUNTED)
L-6 PORTABLE LIGHT TOWER 6KW
35' MAST 2200lbs C/W 4-1000w MH LIGHTS
L-8 PORTABLE LIGHT TOWER 8KW
35' MAST 2200lbs C/W 4-1000w MH LIGHTS
APPROXIMATE AREA ILLUMINATED BY ONE MH FLOODLIGHT 1000W
AVG FT. CANDLES
0.5
SQ FT
82000
ACRES
1.88
52
*Overtime Rates May Apply - Contact Order Desk
PLEASE SPECIFY REQUIRED VOLTAGE & PHASE FOR GENERATORS
SINGLE PHASE: 110, 127, 139, 240, 254, 277
THREE PHASE: 208, 220, 240, 415, 480, 600
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
HEATERS
Description
Hourly
Daily
Weekly
4 Weeks
KEROSENE FIRED
KEROSENE OMNI 105 15,000 BTU, 6L.
KEROWORLD KC 2404
$20.00
$50.00
$90.00
EVERGLOW HEATER LG. ES 12,300 BTU
$10.00
$42.00
$84.00
EVERGLOW HEATER SM ES 7,200 BTU
$10.00
$35.00
$64.00
KEROSENE FIRED/ELECTRIC DRIVEN
KEROSENE READY HEATERS
BC70/RC70T
70,000 BTU, 37LBS,18L.
DFA 65 - 65,000 BTU 19L
$30.00
$100.00
$300.00
BC100/BC115T
98,000 BTU, 55LBS, 34L.
DFA 120 - 120,000 BTU 38L
$35.00
$120.00
$360.00
BC150/RC165T
150,000 BTU, 77LBS, 51L.
DFA 165
$40.00
$135.00
$405.00
BC350
315,000 BTU, 180LBS 95L
$50.00
$200.00
$600.00
$5.00
$15.00
$45.00
$65.00
$265.00
$800.00
$55.00
$226.00
$680.00
$60.00
$250.00
$700.00
$66.00
$265.00
$800.00
THERMOSTATS FOR READY HEATER
111,000 BTU DIRECT RADIANT HEATER
SEKI (SHIZVDKA) *KEROSENE ONLY*
KEROSENE/DIESEL FIRED - ELECTRIC DRIVEN
CLEAN -AIR HEATERS
SIAL 90
ACROTHERM E25 (65L) OR…
ICE SIAL 90 (46L)
135,000 BTU 110V HEATER SIAL 140
46 LITRES 1”= 7 LITRES
180,000 BTU 110V HEATER
ACROTHERM EC40 (65L) OR
ICE SIAL 180 (50.8L)
53
***ALL HEATERS REQUIRING KEROSENE / DIESEL ARE
SUBJECT TO FUEL CHARGES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
HEATERS
Description
Hourly
Daily
Weekly
4 Weeks
$90.00
$330.00
$900.00
$66.00
$85.00
$90.00
$95.00
$400.00
$85.00
$85.00
$265.00
$330.00
$350.50
$375.00
$1,100.00
$330.00
$330.00
$800.00
$900.00
$950.00
$1,000.00
$2,600.00
$900.00
$900.00
ICE 1.2 MILLION BTU INDUSTRIAL
DIESELFIRED
4000lbs 8420 CFM 230V 1PH (107"w X 60"h X 78"L)
8.5 GAL/HR ON HIGH *NO FUEL TANK*
$625.00
$2,500.00
$7,000.00
MAC INDUSTRIAL CONSTRUCTION HEATER
2.5 MILLION BTU 575 VOLT 9000LBS
18' LONG 8' HIGH 8' WIDE 290 GAL. FUEL TANK
$750.00
$3,000.00
$8,500.00
$7.00
$20.00
$45.00
E1100 C/W GENSET
$400.00
$2300.00
$8000.00
E1100 WITHOUT GENSET
$300.00
$1800.00
$6500.00
E3000 GROUND HEATER
C/W GENSET & 3000 ft HOSE
*WITHOUT GENSET
$800.00
$3,200.00
$11,200.00
$700.00
$2,700.00
$10,000.80
ALLMAND MAXI HEAT (MODEL 1000) HOT BOX
$500.00
$2,500.00
$6,000.00
HEATER DUCT -CANVAS 12’ X 12”
CANVAS / HITEX
HEATER DUCT-THERMO HOSE HT 12’x12”
$14.00
$32.00
$96.00
$30.00
$60.00
$120.00
HEATER DUCT - CANVAS 15’x16”
$30.00
$60.00
$120.00
$500.00
$2500.00
$6000.00
CANTHERM EC70 105L
CLEAN AIR FROSTFIGHTERS
OHV200 110V 200,00BTU 91L (24 US GAL.)
OHV350II 110V 320,000BTU 159L (42 US GAL.)
OHV500 110V 420,000BTU 159L (42 US GAL.)
OHV600 110V 520,000BTU 159L (42 US GAL.)
ICE 700 - 700,000 BTU *NO FUEL TANK*
FLO 200 -200,000 BTU 115V 87.6L (23 US GAL.)
FLO 400 -400,000 BTU 115V 159L (42 US GAL.)
**(MUST HAVE 20AMP BREAKER WITH OHV500 & OHV600)
REMOTE THERMOSTAT FOR THE ABOVE
ICE/CANTHERM
THERMOSTAT BOX C/W 25 or 50' CORD
FVO 1000 TR
54
***ALL HEATERS REQUIRING KEROSENE / DIESEL ARE
SUBJECT TO FUEL CHARGES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
HEATERS
Description
Hourly
Daily
Weekly
4 Weeks
$20.00
$25.00
$25.00
$35.00
$10.00
$20.00
$80.00
$100.00
$100.00
$105.00
$30.00
$50.00
$240.00
$285.00
$285.00
$315.00
$80.00
$100.00
$10.00
$20.00
$40.00
$80.00
$5.00
$10.00
$15.00
$20.00
$15.00
$45.00
$65.00
$80.00
$50.00
$130.00
$200.00
$260.00
$10.00
$15.00
$30.00
$35.00
$40.00
$45.00
$35.00
$40.00
$55.00
$100.00
$150.00
$200.00
$225.00
$150.00
$120.00
$135.00
$265.00
$300.00
$600.00
$600.00
$300.00
ELECTRIC PORTABLE CONST HEATERS
240 VOLT, 4800 WATT, 5,000 BTU
$10.00
$30.00
$90.00
KEROSENE HEATER KC2404
$10.00
$40.00
$120.00
100LB. PROPANE BOTTLE
20LB TANK $42.00
½ TANK $35.00
MIN. $12.00
$10.00
$30.00
$90.00
8" CHIMNEY BRUSH
$10.00
$30.00
$5.00
$10.00
PROPANE HEATERS
50,000BTU PROPANE HEAT DRAGON RCVLP50A
50-100,000 BTU DESA RCLP1000V
65-115,000 BTU DESA RCLP115AT
200,000 BTU PROPANE (MUNUH-KID60A)
15,000 BTU PROPANE TANK TOP HEATER
30,000 BTU PROPANE TANK TOP HEATER
SIOUX HEAT GUN #1402
MASTER APPLIANCE HEAT GUN
RADIANT PROPANE HEATERS
MH-12-T 12,000 BTU (1 - ROSEBUD)
MH-24-T 24,000 BTU (2 – ROSEBUD)
BHP16-T 16,000 BTU (GRID)
BH32-T 32,000 BTU (GRID)
ELECTRIC HEATERS
5,000 BTU/HR 120V 1500W PATRON E1.5
10,200 BTU/HR 240V 3000W PATRON E3
30,700 BTU/HR 240V 9000W PATRON E9
61,400 BTU/HR 240V 3PH 47AMP PATRON 18E
133,000 BTU/HR 480V 3PH 60AMP PATRON 40E
133,000 BTU/HR 575V 3PH 60AMP PATRON 40ECA
15-40,000 BTU/HR 320V 10,000W PATRON EDH10
3' CHIMNEY RODS (EACH)
6” CHIMNEY BLACKE STOVE PIPE
18”, 24”, 36”, 90˚ELBOW
$5.00
55
***ALL HEATERS REQUIRING KEROSENE / DIESEL ARE
SUBJECT TO FUEL CHARGES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
HAMMERS
Description
Hourly
Daily
Weekly
4 Weeks
$10.00
$30.00
$60.00
CLAW HAMMER
$3.00
$6.00
$15.00
BALL PEEN HAMMER
(8, 16, 24, 32, 48oz)/EA
$3.00
$6.00
$15.00
$20.00
$60.00
$170.00
Daily
Weekly
4 Weeks
DRUM DE-HEADER (120v)
*CUTTER WHEELS EXTRA COST
$90.00
$300.00
$900.00
DRUM DE-HEADER (PNEUMATIC)
C/W TOWER
*CUTTER WHEELS EXTRA COST
$100.00
$500.00
$1500.00
ABCAN IN-VIRO DRUM
C/W MODEL 3901 HELI PORTABLE UNIT
1 - IN-VIRO DRUM SUCTION LID
1 - 3" ABS STINGER
1 - 2" ABS STINGER
1 - 3" X 2" ALUM. CAM ADAPTER
1 - ALUMINUM VACUUM WAND
1 - ALUMINUM VACUUM HEAD
3 - 15' X 3" STATIC GUARD, PETRULEUM
RESISTANT HOSE W/ ALUMINUM CAMLOCK &
LIVE SWIVEL
$500.00
$2,500.00
$6,000.00
C-CAN
WEIGHT 3540 lbs MODEL 3901
$200.00
$400.00
$1,200.00
SLEDGE HAMMER
(8lbs, 10lbs, 12lbs, 16lbs)/EA
COMP CAST SLEDGE HAMMER
IN-VIRO DRUM
Description
RATE
45 GAL. DRUM OPEN TOPPED WITH RESEALABLE LID (ULC APPROVED) LINED 16GA
*AVAILABLE FOR SALE
DAY = 8 hrs
WEEK = 40 hrs
$135.00ea.
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
56
JACKS AND HOISTS
Description
Hourly
Daily
Weekly
4 Weeks
12 TON HYDRAULIC
$14.00
$30.00
$59.00
20 TON HYDRAULIC
$18.00
$54.00
$115.00
30 TON HYDRAULIC
$25.00
$75.00
$225.00
50 TON HYDRAULIC BOTTLE JACK
$35.00
$105.00
$315.00
1 TON FLOOR JACK
$15.00
$60.00
$200.00
TRANSMISSION JACK (FLOOR) HOIST
$35.00
$140.00
$420.00
TRANSMISSION JACK (UNDER HOIST)
TELESCOPING
$50.00
ENGINE CRANE
$50.00
$200.00
$420.00
SAFETY STAND
$5.00
$20.00
$60.00
RATCHET LEVER (RAILROAD) 15T JACK
$50.00
$150.00
$450.00
HAND TRUCK (DOLLY)
$15.00
$45.00
$125.00
APPLIANCE TRUCK (DOLLY)
$20.00
$60.00
$180.00
WAREHOUSE CART SOLID TIRE BLUE
$30.00
$120.00
$250.00
JACKALL
$10.00
$30.00
$90.00
PORTA POWER - 4 TON
$20.00
$60.00
$180.00
PORTA POWER - 10 TON
PORTA POWER ACCESSORIES
ARM438 RAM 10T X 2 1/4” STROKE
ARM409 RAM 2T X 3” STROKE
ARM437 RAM 4T X 5/8” STROKE
ARM411 RAM 4T X 5” STROKE
$30.00
$100.00
$300.00
PLATE CLAMP 1.5T
$25.00
$75.00
$225.00
2 TON BEAM CLAMP
$25.00
$55.00
$110.00
PANEL LIFT - RAISES UP TO 11' HIGH
15' EXTENSION
$30.00
$5.00
$100.00
$20.00
$300.00
$60.00
JET 5500LBS PALLET JACK
$30.00
$120.00
$250.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
57
JACKS AND HOISTS
Description
Hourly
Daily
Weekly
4 Weeks
$5.00
$10.00
$20.00
$60.00
4 WHEEL PLATFORM TRUCK
$20.00
$60.00
$180.00
PORTABLE GAS POWERED WINCH
CAP 1800LB C/W 1 - PULLEY BLK.
$65.00
$260.00
$780.00
CHAIN HOIST 3/4 TON, 5FT LIFT
$20.00
$65.00
$195.00
CHAIN HOIST 1 TON, 5-15FT LIFT
$48.00
$80.00
$220.00
CHAIN HOIST 1-1/2 TON, 5-10FT LIFT
$55.00
$95.00
$300.00
CHAIN HOIST 3 TON, 5-12FT LIFT
$60.00
$240.00
$400.00
CHAIN HOIST 4 TON, 6-18FT LIFT
$80.00
$250.00
$725.00
CHAIN HOIST 6 TON, 10-18FT LIFT
$135.00
$400.00
$1,235.00
COME ALONG W/ 1/4 CABLE 1000/2000 lbs
$10.00
$30.00
$80.00
COME ALONG W/ 3/8 CABLE 1700/3400 lbs
$15.00
$45.00
$125.00
COME ALONG 3/4 TON CHAIN TYPE 5ft FALL
$35.00
$50.00
$95.00
COME ALONG 1 TON CHAIN TYPE 5-10ft FALL
$45.00
$65.00
$155.00
COME ALONG 1 1/2 TON CHAIN TYP 5-10ft FALL
$45.00
$65.00
$155.00
COME ALONG 2 TON CHAIN TYPE 5-10ft
$50.00
$100.00
$205.00
$125.00
$400.00
$1100.00
TIRFOR 1500lbs LIFT
$35.00
$100.00
$250.00
TIRFOR 3000lbs LIFT
$40.00
$120.00
$350.00
TIRFOR 6000lbs LIFT
$45.00
$135.00
$400.00
RAMPS (SET 2)
COME ALONGS / CHAIN FALLS / TIRFORS
COME ALONG 6 TON CHAIN TYPE 10-15ft FALL
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
58
LADDERS
Description
Hourly
Daily
Weekly
4 Weeks
STEP LADDERS
6ft ALUMINIUM STEP LADDER
$13.00
$30.00
$117.00
8ft ALUMINIUM STEP LADDER
$15.00
$45.00
$135.00
10ft ALUMINIUM STEP LADDER
$18.00
$54.00
$180.00
12ft ALUMINIUM STEP LADDER
$20.00
$60.00
$200.00
6ft FIBREGLASS STEP LADDER
$18.00
$54.00
$182.00
8ft FIBREGLASS STEP LADDER
$20.00
$60.00
$180.00
10ft FIBREGLASS STEP LADDER
$25.00
$100.00
$300.00
12ft FIBREGLASS STEP LADDER
$30.00
$120.00
$400.00
EXTENSION LADDERS
12-20ft ALUMINUM EXTENSION LADDER
$15.00
$60.00
$240.00
15-30ft ALUMINUM EXTENSION LADDER
$25.00
$100.00
$300.00
20-40ft ALUMINUM EXTENSION LADDER
$30.00
$120.00
$380.00
LITTLE GIANT
7-11ft M-13 ALUMINUM LADDER 3-5ft STEP
$15.00
$60.00
$240.00
9-15ft M-17 ALUMINUM LADDER 4-7ft STEP
$20.00
$80.00
$240.00
11-19ft M-22 ALUMINUM LADDER 5-9ft STEP
$25.00
$100.00
$300.00
13-23ft M-26 ALUMINUM LADDER 6-11ft STEP
$30.00
$120.00
$360.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
59
LAWN AND GARDEN EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
LAWN AERATOR GAS (HUSQVARNA / SNAPPER)
( POWER SLICER)
LAWN AERATOR (HUSQVARNA AR19)
$25.00
$125.00
$375.00
$50.00
$250.00
$750.00
LAWN POWER RAKE GAS
(SENSATION / HUSQVARNA / SNAPPER / KEES)
S/N 480109
$25.00
$125.00
$400.00
$1,250.00
SNAPPER LAWN MOWER I/C 5-6hp 21"
$20.00
$80.00
$240.00
$720.00
SNAPPER LAWNMOWER C/W
GRASS CATCHER 5HP 21”
ROTOTILLER MINI (FLOWER BED)
$20.00
$80.00
$240.00
$720.00
$25.00
$100.00
$300.00
ROTOTILLER (FRONTLINE) 5hp (SNAPPER / MAXIUM)
$25.00
$100.00
$300.00
ROTOTILLER (REARTINE) HUSQ700 DRT
$50.00
$150.00
$600.00
BCS TRACTOR HARVESTER GAS (HONDA/B&S)
$25.00
$100.00
$500.00
$1,500.00
BCS ATTACHMENT - ROTOTILLER - REAR TINE
$10.00
$50.00
$100.00
$300.00
BCS ATTACHMENT – SWEEPER 40”
$30.00
$75.00
$280.00
$850.00
TRIMMER-ELECTRIC WEED WHIPPER
$4.00
$16.00
TRIMMER-STRING 132R (HUSQ.) 32CC
- GAS POWERED
TRIMMER - ESTATE 5HP
WALK BEHIND
EXTRA STRING ROT RT-9332
.155 DIA STRING
$10.00
$135.00
$270.00
$65.00
$250.00
$750.00
WHEEL BARROW
$10.00
$40.00
$120.00
LOG SPLITTER (GAS POWERED) TOW BEHIND
C/W 4 WAY SPLITTER
*REQUIRES 2" BALL HITCH
FERTILIZER SPREADER
$80.00
$300.00
$900.00
$5.00
$10.00
$32.00
$40.00
HAND HELD SPREADER
$3.00
$5.00
$10.00
$20.00
LAWN ROLLER
$3.00
$10.00
$32.00
DAY = 8 hrs
WEEK = 40 hrs
$45.00
$430.00
$1.20EA
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
60
LAWN AND GARDEN EQUIPMENT
Description
Hourly
Daily
Weekly
3ft GREAT RAKE (LANDSCAPE)
$3.00
$12.00
$60.00
4ft GREAT RAKE (LANDSCAPE)
$4.00
$15.00
$75.00
LONG HANDLED SHOVEL
$3.00
$10.00
$30.00
LAWN/GARDEN RAKE
$3.00
$10.00
$30.00
PICK/ GRUBHOE
$3.00
$10.00
$30.00
$45.00
$135.00
$270.00
$30.00
$120.00
$360.00
$60.00
$180.00
$360.00
$80.00
$240.00
$720.00
$5.00
$10.00
$30.00
$14.00
$72.00
$350.00
$1,000.00
$3,000.00
MAGSWEEP 24"
MAGNETIC SWEEPER
$10.00
$40.00
$120.00
LAWN EDGER – GAS, HUSQVARNA 326ES
$45.00
$135.00
$270.00
RHINO GAS POST DRIVER
$50.00
$250.00
$750.00
BIG RHINO HYDRAULIC POST DRIVER
REQUIRES AIR COMPRESSOR
SC70 COMPRESSOR
$80.00
$320.00
$2250.00
$115.00
$445.00
$1,335.00
18H HEDGE TRIMMER (HUSQ.)
$10.00
BACKPACK BLOWER (HUSQ.)
POWER BROOM/PADDLE (HUSQ.)
- GAS POWERED
$20.00
SNAPPER SG8000 CHIPPER SHREDDER
S/N 15148209 8HP
MAX DIAMETER 2"
SPRAY DOC
CHEMICAL SPRAYER
GREEN MACHINE WEED CULTIVATOR
CHIPPER SHREDDER 6"
25HP - GAS POWERED/SELF FEEDING
DAY = 8 hrs
WEEK = 40 hrs
$6.00
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
4 Weeks
61
LEVELS
Description
Hourly
Daily
Weekly
4 Weeks
2 FT. BUILDERS LEVEL (SPIRIT)
$4.00
$12.00
$25.00
4 FT. BUILDERS LEVEL (SPIRIT)
$6.00
$18.00
$45.00
EL-1 ELECTRONIC LEVEL L.
TRIPOD, DUCT-READ OUT SENSOR
$80.00
$300.00
$900.00
DUTCH HILL TRIPOD ONLY
$12.00
$48.00
$144.00
$5.00
$15.00
$50.00
THEODOLITE DIGITAL TRANSITE NETH20
C/W TRIPOD
HORIZONTAL VERTICAL 1452XL
LASER LEVEL (VISUAL LASER)
C/W TRIPOD & GRADE ROD
$80.00
$300.00
$900.00
$80.00
$300.00
$900.00
LASER RECEIVER (FOR ABOVE) HR500
$25.00
$75.00
$225.00
32X AUTO LEVEL (BUILDERS)
C/W TRIPOD & GRADE ROD
$45.00
$135.00
$405.00
TRIPOD ALUMINUM OR FIBREGLASS
$10.00
$30.00
$100.00
METAL DETECTOR #101 MAGNATRAK / CST
(MAGNETIC LOCATOR)
$35.00
$90.00
$180.00
WATER LEVEL STD. ANTIFREEZE
$45.00
$90.00
$270.00
3M/4 METER GRADE ROD ONLY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
62
LIGHTS
Description
Hourly
Daily
Weekly
4 Weeks
CONSTRUCTION LIGHT STRING
C/W SOCKETS
$4.00
$12.00
$24.00
FLOOD LIGHT 500 WATT W/ TRIPOD
$5.00
$20.00
$60.00
FLOOD LIGHT TWIN 500 WATT W/ TRIPOD
$7.50
$22.50
$67.50
FLOOD LIGHT (SINGLE) 110V 1000W
C/W STAND & WHEELS
$45.00
$135.00
$400.00
FLOOD LIGHT (TWIN) 110V 1000W
C/W 12ft STAND & WHEELS
$60.00
$165.00
$500.00
*I/R L6 LIGHT TOWER 6KW - DIESEL
4-1000 WATT
$210.00
$775.00
$2,270.00
* I/R L8 LIGHT TOWER 8 KW
DIESEL 4-1000 WATT
$230.00
$825.00
$2,435.00
* POWER TOWER 14KW DIESEL
4-1000 WATT
$255.00
$1,000.00
$2,945.00
I/R L20 20KW DIESEL 4-1000 WATT
$385.00
$1,500.00
$4,415.00
*OVERTIME HOURS MAY APPLY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
63
LOADERS (SKIDSTEER)
(SKIDSTEER LOADERS C/W 1 x BUCKET OR FORKS)
Description
Daily
Weekly
4 Weeks
463, S70 SKID-STEER
LIFTING CAPACITY 700LBS, WEIGHT 2708LBS,
LIFT HEIGHT 7'9"
$200.00
$800.00
$2,400.00
S100 SKID-STEER
LIFTING CAPACITY 1000LBS, WEIGHT
LIFT HEIGHT
$225.00
$900.00
$2,700.00
S175, S185 SKID-STEER
LIFTING CAPACITY 1750LBS / 1850 LBS
WEIGHT 6220LBS, LIFT HEIGHT 9'8"
$250.00
$1,000.00
$3,000.00
S630 SKID-STEER
LIFTING CAPACITY 2050LBS, WEIGHT 6655 LBS
LIFT HEIGHT 9'8"
$300.00
$1,200.00
$3,500.00
S300, S650 SKID-STEER
LIFTING CAPACITY 2500LBS / 3000LBS
WEIGHT 7723LBS/8448LBS, LIFT HEIGHT 10'7"
$300.00
$1,200.00
$3,500.00
S750 SKID-STEER
LIFTING CAPACITY 3300LBS, WEIGHT 9185 LBS
LIFT HEIGHT 10'8"
$350.00
$1,500.00
$4,500.00
T630 TRACK LOADER
LIFTING CAPACITY 2230LBS
$350.00
$1,500.00
$4,500.00
T250, T300 TRACK LOADER
LIFTING CAPACITY 3500LBS / 3000LBS
WEIGHT 9347LBS / 9705LBS, LIFT HEIGHT 10'7"
$350.00
$1,500.00
$4,500.00
T320, T870/SVL90 TRACK LOADER
LIFTING CAPACITY 3200LBS, WEIGHT 9705LBS
LIFT HEIGHT 10'7"
$450.00
$2,000.00
$5,500.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
64
LOADERS (SKID-STEER MINI TRACK LOADERS)
Description
Daily
Weekly
4 Weeks
MT50, MT52 MINI TRACK LOADER
LIFTING CAPACITY 500LBS / 520LBS
WEIGHT 2510LBS, LIFT HEIGHT 5'9"
5.1 CUBIC FEET BUCKET EDGE TYPE
$200.00
$800.00
$2,400.00
MT55 MINI TRACK LOADER
LIFTING CAPACITY 550LBS, WEIGHT 2700LBS
LIFT HEIGHT 5'9"
$225.00
$900.00
$2,700.00
LOADERS (SKID-STEER ATTACHMENTS)*
Description
Daily
Weekly
4 Weeks
36" BUCKET
$30.00
$120.00
$360.00
50" BUCKET
$30.00
$120.00
$360.00
60"-74" BUCKET
$30.00
$120.00
$360.00
80"-88"BUCKET
$30.00
$120.00
$360.00
100" SNOW BUCKET
$38.50
$155.00
$465.00
PALLET FORKS (2500LBS CAPACITY)
$40.00
$160.00
$480.00
PALLET FORKS HD (3000LBS CAPACITY)
$45.00
$175.00
$500.00
SKID-STEERR MODEL 30 AUGER DRIVE
REQUIRES HOSE GUIDE #7187118
SPREADER
$100.00
$400.00
$900.00
$150.00
$500.00
$1,200.00
$90.00
$355.00
$1,065.00
SKID-STEER HYDRAULIC BREAKER
$300.00
$1,200.00
$3,500.00
TRENCHER LT303
$250.00
$900.00
$2,500.00
80” DOZER BLADE 6-WAY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
65
LOADERS (SKID-STEER ATTACHMENTS)*
Description
Daily
Weekly
4 Weeks
AUGER EXTENSION (4' ADJUSTABLE)
$30.00
$120.00
$360.00
AUGER BIT 9" & 12"
$40.00
$160.00
$480.00
ROCK BIT 9”
$80.00
$320.00
$960.00
AUGER BIT 15"
$60.00
$240.00
$540.00
AUGER BIT 24"
$70.00
$280.00
$660.00
72" ROTARY MOWER BRUSHCUT (PLUS BLADES)
$250.00
$1,000.00
$3,000.00
SB200 SNOWBLOWER 72" STANDARD FLOW
REQUIRES HOSE GUIDE #7187118
$200.00
$800.00
$2,400.00
72” PICK UP SWEEPER
REQUIRES HOSE GUIDE #7187118
$275.00
$1,000.00
$2,500.00
68” ANGLE BROOM
NEW BRISTAL LENGTH 7.5”
REQUIRES HOSE GUIDE #7187118
$250.00
$800.00
$2,400.00
$25.00
$100.00
$300.00
AUGER ADAPTER (ROUND TO HEX)
FORK EXTENSIONS 72” FITS UP TO 6”x 48”
FORKS
*CUSTOMER RESPONSIBLE FOR CUTTING EDGES & TEETH
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
66
LOADERS (SKID-STEER PARTS & ACCESSORIES)
Description
Daily
SKID-STEER SPARE TIRE
$28.00
Weekly
4 Weeks
$82.00
$241.00
LOADERS
Description
1/2 Day
Daily
Weekly
4 Weeks
$350.00
$1,500.00
$4,500.00
$30.00
$40.00
$120.00
$160.00
$360.00
$480.00
$1,000.00
$4,000.00
$12,000.00
$225.00
$300.00
$50.00
$600.00
$900.00
$200.00
$2,000.00
$2,500.00
$600.00
Daily
Weekly
4 Weeks
$600.00
$2,000.00
$5,500.00
$33.00
$130.00
$255.00
$600.00
$2,000.00
$5,500.00
$90.00
$355.00
$1,065.00
SKIDSTEER HYDRAULIC BREAKER
$300.00
$1,200.00
$3,500.00
TRENCHER ST303
$250.00
$900.00
$2.500.00
KUBOTA R520 LOADER
ATTACHMENTS:
68" KUBOTA BUCKET (EDGE TYPE)
48" KUBOTA PALLET FORKS
DOOSAN DL250TC FRONTEND WHEELER
LOADER 163HP
WEIGHT: 32,106 LBS
CAPACITY: 18,000 LBS
C/W BUCKET OR FORKS
ATTACHMENTS:
108” BUCKETGP 3.5 YD BOCE
120” BUCKETLM 5.0 YD BOCE
60” PALLET FORKS
LOADERS (BACKHOE)
Description
1/2 Day
LOADER/BACKHOE DIESEL 410G
16,500LBS, 15'-19'
BACKHOE BUCKET 12"
LOADER/BACKHOE DIESEL 410G
16,500LBS, 15'-19'
80” DOZER BLADE
½ DAY RATE BASED ON 4 ½ HRS MAX. FROM TIME LEAVES YARD TO TIME RETURNED
(4 HRS ON METER)
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
67
PAINT & WALLPAPER EQUIPMENT
Description
Daily
Weekly
4 Weeks
* VOLUME AIR PAINT SPRAYER
CLEANING $35.00 EXTRA
Hourly
$35.00
$105.00
$300.00
* HERO PAINT PUMP
3 GAL, 2000 LBS PRESSURE
EXTRA 50 FT. HOSE
Cleaning $65.00 Extra
$85.00
$340.00
$1,020.00
$10.00
$40.00
$120.00
WALLPAPER STRIPPER
$20.00
$80.00
$240.00
TEXTURE GUN AND HOPPER PC301
$12.00
$48.00
$144.00
STIPPLE MACHINE PC300
C/W GUN & HOPPER PC301
$70.00
$280.00
$780.00
$4.00
$12.00
$35.00
$10.00
$40.00
$80.00
PAINT MIXER
FOAM DISPENSER (HILTI CF-DS 1)
** CLEANING SOLVENT ALSO AVAILABLE
ALL PAINTING EQUIPMENT MUST BE RETURNED CLEAN OR CLEANING
CHARGES WILL APPLY
PARTY EQUIPMENT
Description
Hourly
Daily
BBQ PROPANE 36”
$100.00
BBQ PROPANE 48"
$100.00
ROTISSERIE FOR 48” BBQ
Weekly
4 Weeks
$50.00
BBQ PROPANE 60”
$150.00
CLEANING IS EXTRA CHARGE (2 DAYS, 1 DAY
FOR CLEANING). RECOMMEND USING PAM OR
EASY OFF TO CUSTOMERS CLEANING
THEMSELVES.
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
68
PIPE CUTTERS
Description
Hourly
Daily
Weekly
4 Weeks
MINI CUTTERS
$1.00
$4.00
$12.00
1/8” - 1”
$2.00
$8.00
$24.00
1” - 2”
$12.00
$48.00
$96.00
2” - 4”
$15.00
$60.00
$120.00
PIPE WRENCH 14 OR 18" ALUMINUM
$10.00
$40.00
PIPE WRENCH - 36”
$15.00
$60.00
$100.00
PIPE WRENCH 48" ALUMINUM
$20.00
$80.00
$120.00
$14.00
$30.00
$62.00
$7.00
$12.00
$25.00
Daily
Weekly
4 Weeks
POLY B CRIMPING PLIER 1/2” X 3/4”
$10.00
$30.00
$90.00
01 - HANDY DRAIN CLEANER
BASIN 25 FT. SNAKE 1” 1 1/2”
$10.00
$40.00
$120.00
01 - 3A HANDY CLOSET AUGER
( CLEANING TOILET TRAP)
$8.00
$32.00
$96.00
RIDGID K-39
3/4" - 2-1/2" CAPACITY, 110V POWER
5/16" x 25FT CABLE
$40.00
$160.00
$220.00
RIDGID K60SP
110V POWER 1 1/4" - 4" CAPACITY
7/8" x 75FT CABLE DRAIN CLEANER
$80.00
$250.00
$745.00
HAND PIPE THREADER KIT 3/8" - 2"
$30.00
$120.00
$360.00
PIPE STANDS
PIPE STAND "V" TOP ADJUSTABLE
ROLLER HEAD 1" - 8"
FOR ADJUSTABLE PIPE STAND
PLUMBING EQUIPMENT
Description
Hourly
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
69
PLUMBING EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
RIDGID 300 POWER VISE
(VISE ONLY C/W TRIPOD # 1206)
1/2" - 2" CAPACITY
$50.00
$150.00
$450.00
DIES (SET OF 4)
1/2" - 3/4" OR 1" - 2" NPT
$10.00
$20.00
$30.00
DIE HEAD ONLY # 811A
C/W 1 SET OF DIES
$10.00
$20.00
$40.00
#311 CARRIAGE C/W LEVER, #341 REAMER,
#360 CUTTER & 1 SET OF DIES 1/2" - 3/4"
OR 1" - 2"
$20.00
$60.00
$180.00
OIL POT #418 MANUAL OILER
$10.00
$20.00
$60.00
TRANSPORTER #32
$10.00
$20.00
$40.00
PIPE THREADER 2-1/2" - 4" RIDGID 141
$50.00
$150.00
$440.00
UNIVERSAL DRIVESHAFT FOR RIDGID 141
$10.00
$25.00
$75.00
NIPPLE CHUCK #819 KIT (51005
$10.00
$24.00
$65.00
TRISTAND CHAIN VISE 1/8" - 6" RIDGID 460
$20.00
$40.00
$92.00
$110.00
$290.00
$800.00
RIDGID 300
COMES WITH YELLOW BOX COMPLETE
NOTE: DIES & CUTTER WHEELS MAY BE CHARGED OUT ON WEAR OR DAMAGE:
RID441875 #360 CUTTER WHEELS / RID 47745 #811A 1/2" - 3/4" DIES / RID47750 #811A 1" - 2"
DIES
OIL IS EXTRA:
RID70835 1 GAL NU - CLEAR OIL
RID70830 1 GAL DARK CUTTING OIL
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
70
PRESSURE WASHERS
Description
Hourly
Daily
Weekly
4 Weeks
JET BOX 1000 PSI ELECTRIC
$10.00
$40.00
$160.00
$480.00
POWER JET PG4-30321M
3000PSI HONDA GAS
$70.00
$280.00
$840.00
ALKOTA 1500 PSI ELECTRIC/DIESEL FIRED
HOT WATER PRESSURE WASHER
$80.00
$320.00
$960.00
WITH STEAM ATTACHMENT - EXTRA
$10.00
$40.00
$120.00
LANDA ELECTRIC/DIESEL FIRED
3000 PSI 220V 640LBS
3.9 GPM
$130.00
$500.00
$1500.00
LANDA SLT6-32824E
3200 PSI @ 6GPM
DIESEL POWERED / HOT WATER / STEAMER
PRESSURE WASHER ON SKID
C/W 50FT PRESSURE HOSE & WAND
C/W 50FT STEAM HOSE & WAND
$500.00
$1500.00
$4500.00
$50.00
$150.00
$300.00
ARCTIC BLASTER
* NOTE * SOAP AVAILABLE FOR PURCHASE
TURBO NOZZLE (LRG) 3000-5000 PSI
$15.00
$60.00
$180.00
TURBO NOZZLE JR (SMALL) 3000 PSI
$15.00
$60.00
$120.00
PRESSURE WASHER HOSE 3/8”X50’
$7.00
$28.00
$84.53
PRESSURE WASHER HOSE 3/8”X100’
$14.00
$56.00
$170.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
71
PUMPS
Description
Hourly
Daily
Weekly
4 Weeks
SIMER GEYSER SUBMERSIBLE PUMP
(GARDEN HOSE) 3/4”
$15.00
$60.00
$120.00
2” U-40K SUBMERSIBLE PUMP
C/W 20 FT. DISCHARGE HOSE
2” SUBMERSIBLE TRASH PUMP
$30.00
$120.00
$360.00
$35.00
$140.00
$420.00
3" US-75A SUBMERSIBLE PUMP
C/W 20 FT. DISCHARGE
3” SUBMERSIBLE TRASH PUMP
$35.00
$140.00
$420.00
$40.00
$160.00
$400.00
$3.00
$12.00
$36.00
$25.00
$100.00
$300.00
$40.00
$160.00
$480.00
$65.00
$260.00
$780.00
2” CENT. PUMP (DIESEL)
2” GAS GORMAN-RUPP FUEL TRANSFER PUMP
82D1-EXL3X
$62.50
$205.00
$250.00
$610.00
$750.00
$1830.00
2” ELECTRIC GORMAN-RUPP FUEL T/FER PUMP
02K3-X2-1P 208V
3” CENT. PUMP (GAS)
C/W 25 FT. PICK UP HOSE
50 FT. DISCHARGE HOSE
3” TRASH PUMP (GAS)
C/W 20 FT. PICK UP HOSE
50 FT. DISCHARGE
3” CENT PUMP (ROBIN DIESEL OR TSURUMI)
C/W 25FT. PICKUP HOSE
50’ DISCHARGE HOSE
$250.00
$500.00
$1500.00
$45.00
$180.00
$540.00
$75.00
$300.00
$900.00
$68.75
$275.00
$825.00
3” DIESEL GORMAN-RUPP FUEL TRANSFER
PUMP 83A1L100E EX
C/W 30FT. SUCTION SOFT DISCHARGE
$450.00
$1350.00
$4050.00
4" GASOLINE TRASH PUMP (ROBIN PTV-405T)
C/W 1 FT - 25 FT PICK UP HOSE
C/W 1 FT - 50 FT DISCHARGE HOSE
$100.00
$400.00
$1,200.00
110V 15V FLOATING PUMP SWITCH
(FLOAT SWITCH)
1” CENT. PUMP (GAS)
C/W 17 FT. PICK UP HOSE
50 FT. DISCHARGE HOSE
2” CENT. PUMP (GAS)
C/W 25 FT. PICK UP HOSE
50 FT. DISCHARGE HOSE
2" TRASH PUMP (GAS)
NOTE: CLEANING CHARGE WILL APPLY IF PUMPS & HOSE
RETURNED DIRTY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
72
PUMPS
Description
Hourly
4" DIESEL TRASH PUMP (ROBIN PTD-405T)
C/W 1 FT - 25 FT PICK UP HOSE
C/W 1 FT - 50 FT DISCHARGE HOSE
GORMAN RUPP
4” DIESEL PUMP (SKIDDED) NO HOSE
AS ABOVE PUMP:
W ITH 4” X 25’ SUCTION & 4" X 50'
DISCHARGE HOSE
AS ABOVE PUMP:
WITH TRAILER NO HOSE
AS ABOVE PUMP:
WITH TRAILER & HOSE
6" CENT. PUMP (GAS)
C/W 20 FT. PICK UP HOSE
50 FT. DISCHARGE HOSE
GORMAN RUPP
6” DIESEL PUMP (SKIDDED) NO HOSE
AS ABOVE PUMP:
WITH 6” X 25’ SUCTION & 6" X 50'
DISCHARGE HOSE
AS ABOVE PUMP:
WITH TRAILER NO HOSE
AS ABOVE PUMP:
WITH TRAIL & HOSE
PUMP DIESEL 6”X6” VAC ASSIST
NO ENCLOSERD SKID LIFT BALL
PA6C60-4045TPAS NO O/T
PUMP DIESEL 8”X6” VAC ASSIST
ENCLOSED SILENCED PKG
PA6C60-4045T-ES NO O/T
3” DIAPHRAGM QPD30 (GAS)
C/W 20 FT. PICKUP HOSE
50 FT. DISCHARGE HOSE
TSUTHP-4070HA TSURUMI HIGH PRESSURE
1 ½” C/W 20’ PICKUP 50’ DISCHARGE HOSE
4 CYCLE GAS
1-1/2" MARK III 2 CYCLE FIRE PUMP
C/W 10 FT SUCTION HOSE & JERRY CAN
Daily
Weekly
4 Weeks
$125.00
$500.00
$1,500.00
$135.00
$550.00
$1,580.00
$172.00
$649.20
$2,084.60
$144.00
$562.80
$1,821.60
$184.00
$682.85
$2,186.60
$170.25
$681.00
$2,043.05
$415.00
$1,195.00
$3,470.00
$437.00
$1,333.60
$3,803.20
$475.00
$1,425.60
$4,141.20
$527.00
$1,633.60
$4,637.20
$335.00
$1300.00
$3850.00
$425.00
$1700.00
$5000.00
$50.00
$200.00
$600.00
$62.50
$250.00
$750.00
$200.00
$600.00
$1,800.00
NOTE: CLEANING CHARGE WILL APPLY IF PUMPS & HOSE
RETURNED DIRTY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
73
PUMPS
Description
Hourly
Daily
Weekly
4 Weeks
1" AIR OPERATED DIAPHRAGM PUMP
$62.00
$245.00
$730.00
2" AIR OPERATED DIAPHRAGM PUMP
$72.00
$280.00
$815.00
PONY PUMP 115V
C/W SHORT GARDEN HOSE
$20.00
$60.00
$120.00
WATER BED PUMP 110V
$10.00
$40.00
$120.00
BAKER PUMP HAND TYPE HP1000
3000 PSI PRESSURE PUMP
$42.00
$125.00
$360.00
BARREL PUMP MANUAL (HAND TYPE) 3/4"
*C/W FILTER / SEPERATOR
$20.00
$25.00
$60.00
$75.00
$180.00
$225.00
FILL RITE BARREL PUMP 12V & 115V (15-20 GPM)
$40.00
$120.00
$360.00
FILL RITE BARREL PUMP 12V & 115V (12-15 GPM)
$25.00
$75.00
$225.00
FILTER FUEL (ATTACHES TO PUMP OUTLET)
*MUST BUY FILTER CARTRIDGE
$10.00
$30.00
$90.00
1-1/4" ELECTRIC 115V 1HP FUEL TRANSFER
EXPLOSION-PROOF PUMP (MONARCH BSE100XV)
$60.00
$225.00
$675.00
$110.00
$330.00
$990.00
DISCHARGE HOSE
1”X50’ RED RUBBER
1”X50’ BLK RUBBER (FUEL COMPATIBLE)
1"X100' BLK RUBBER (FUEL COMPATIBLE)
$10.00
$15.00
$30.00
$25.00
$45.00
$90.00
$75.00
$135.00
$180.00
DISCHARGE HOSE (PLASTIC LAYFLAT)
1” X 50’
1-1/2” X 100’ FORESTRY HOSE
2” X 50’
2” X 100’
2” X 300’
$10.00
$12.00
$12.00
$18.00
$40.00
$25.00
$30.00
$30.00
$50.00
$115.00
$75.00
$90.00
$90.00
$150.00
$350.00
TYPHOON FLOOD PUMP
(USES 6" - 8" ICE AUGER HOLE)
NOTE: CLEANING CHARGE WILL APPLY IF PUMPS & HOSE
RETURNED DIRTY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
74
PUMPS
Description
Hourly
Daily
Weekly
4 Weeks
$15.00
$28.00
$52.00
$22.00
$35.00
$100.00
$20.00
$45.00
$80.00
$156.00
$65.00
$105.00
$300.00
$80.00
$130.00
$240.00
$435.00
$200.00
$320.00
$900.00
$240.00
DISCHARGE HOSE (LAYFLAT) BLACK RUBBER
2” X 20’ – 25’
2” X 50’
3” X 20’ – 25’
3” X 50’
4” X 20’
6” X 25’
6” X 50’
$12.00
$18.00
$15.00
$28.00
$28.00
$32.00
$35.00
$30.00
$50.00
$45.00
$80.00
$80.00
$128.00
$150.00
$90.00
$150.00
$130.00
$240.00
$240.00
$256.00
$320.00
SUCTION HOSE (BLACK OR RED RUBBER)
1” X 20’
2” X 20’
3” X 20’
4”X 20’
6” X 20’
$10.00
$10.00
$12.00
$18.00
$32.00
$40.00
$40.00
$48.00
$55.00
$128.00
$120.00
$120.00
$144.00
$165.00
$256.00
$15.00
$25.00
$25.00
$40.00
$50.00
$100.00
$100.00
$160.00
$150.00
$300.00
$300.00
$480.00
$3.00
$5.00
$12.00
$20.00
$36.00
$60.00
DISCHARGE HOSE (PLASTIC LAYFLAT)
3” X 50’
3” X 100’
3” X 300’
4”X 50’
4"X100'
4”X 300’
6”X 50’
FUEL TRANSFER HOSE
2” X 15’ ARCTIC FUEL TRANSFER HOSE
2” X 35’ ARCTIC FUEL TRANSFER HOSE
3” X 20’ ARCTIC FUEL TRANSFER HOSE
3” X 50’ ARCTIC FUEL TRANSFER HOSE
GARDEN HOSE
25'
50'
NOTE: CLEANING CHARGE WILL APPLY IF PUMPS & HOSE
RETURNED DIRTY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
75
PUMPS (TOOLS & TANKS)
Description
Hourly
Daily
Weekly
4 Weeks
P-1 PUNCH LOCK TOOL (HOSE REPAIR)
$10.00
$40.00
$120.00
295L (65G) WESTEEL TIDY TANK
$30.00
$50.00
$150.00
450L (100G) WESTEEL TIDY TANK
$45.00
$105.00
$315.00
615L (135G) TIDY TANK
$50.00
$125.00
$400.00
750L (165G) TIDY TANK
$60.00
$150.00
$500.00
OIL CUBE / CUBE OIL
(MUST BE RETURNED CLEAN)
$45.00
$105.00
$315.00
Daily
Weekly
4 Weeks
$60.00
$165.00
$500.00
GENSCO REBAR BENDER LRB40 220v 3PH 500KG
$185.00
$555.00
$1,665.00
GENSCO REBAR SHEAR 220v 3PH 60hz
UP TO CAPACITY 1
$115.00
$345.00
$1,045.00
GAS / DIESEL ENGINE REBAR BENDER / SHEAR
TRAILER MOUNT
$500.00
$1,500.00
$3,500.00
REBAR BENDERS / SHEARS
Description
Hourly
MQ REBAR BENDER 25mm CAPACITY 300 LBS
110v 5sec. FOR 180 DEGREE RANGE 0-180
**SUBJECT TO AVAILABLILITY
NOTE: CLEANING CHARGE WILL APPLY IF PUMPS & HOSE
RETURNED DIRTY
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
76
SAFETY EQUIPMENT
Description
Hourly
Daily
Weekly
4 Weeks
CHAINSAW HARD HELMUT
C/W MUFFS & SHIELD SCREEN
$5.00
$20.00
$60.00
CHAINSAW SAFETY CHAPS
CG9A
$5.00
$20.00
$60.00
LANYARD 6' SHOCK ABSORBER
$15.00
$28.00
$46.00
LANYARD 30'/50' RETRACTABLE
$55.00
$115.00
$275.00
SAFETY BODY HARNESS
$15.00
$44.00
$82.00
FIRE EXTINGUISHER 5 LBS ABC
FIRE EXTINGUISHER 10 LBS ABC
FIRE EXTINGUISHER 20 LBS ABC
$10.00
$15.00
$15.00
$20.00
$25.00
$25.00
$35.00
$50.00
$50.00
WHEEL CHOCKS (PAIR / SET)
VARIETY OF SIZES AVAILABLE
$25.00
ABOVE CHAINSAW PANTS, LANYARDS & HARNESS: IF RETURNED CUT,
RIPPED OR FULL OF PAINT ITEM MUST BE BOUGHT
SANDERS
Description
Hourly
Daily
Weekly
4 Weeks
$6.00
$20.00
$50.00
* BELT SANDER 3" x 24"
$25.00
$60.00
$120.00
* ORBITAL SANDER AIR CP
$10.00
$40.00
$95.00
$5.00
$20.00
$60.00
$60.00
$35.00
$230.00
$230.00
$125.00
$685.00
$685.00
$400.00
$60.00
$110.00
$230.00
$440.00
$685.00
$1,100.00
* VIBRATOR SANDER
* POLE SANDER
FLOOR SANDERS
8" DRUM SANDER HIRETECH (HT8)
SQUARE BUFF SANDER 16"
7" DISC EDGER HIRETECH PE7
17" HUSKY FLOOR MAINTAINER 110v
*USED AS A SANDER / POLISHER
*USED AS A GRINDER
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
77
SANDERS
Description
Hourly
Daily
Weekly
4 Weeks
$60.00
$230.00
$685.00
$20.00
$20.00
$40.00
$40.00
$80.00
$80.00
$20.00
$40.00
$80.00
$75.00
$200.00
$600.00
CLEMCO 1042 1.0CF CAPACITY
C/W 25' - 1/2" BLAST HOSE ASSY & UT #4 NOZZLE
$150.00
$350.00
$1,050.00
CLEMCO 1648 3.0CF CAPACITY
C/W 50' - 1" BLAST HOSE ASSY
UDC 4AC NOZZLE & PGK COUPLING / HOSE
WASHERS
$200.00
$465.00
$1,400.00
NV - 2000 NOVA RESPIRATOR
41AP - 2 AIR PURIFIER
50' BREATHING AIR HOSE ASSY
$50.00
$150.00
$300.00
17" - 20" 2 SPEED POLISHER / SCRUBBER 110v
HUSKY (R172VP / R20-2VP)
FLOOR MAINTAINER
SANDPAPER HOLDER VELCRO BACK UP PLATE
SAND PAPER / SAND SCREEN WOOL BACK UP
PLATE
STONE BLOCK HOLDER BACK UP PAD
FOR REMOVAL OF
PAINT, GLUE, EPOXY ON CONCRETE FLOORS
CARBIDE HEX PLATE (HEX17)
*FOR HUSKY FLOOR MAINTAINER
*REPLACEMENT CARBIDES $20.00 ea.
*REPLACEMENT PIN / CARBIDE ASSY $60.00 ea.
**WEIGHTS AVAILABLE FOR MORE AGGRESSIVE WORK
**CUSTOMER RESPONSIBLE FOR BROKEN / BENT PINS & CARBIDES
*NOTE*
All Types of Sandpaper, Blasting Sand & Beads Available
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
78
SAWS
Description
Hourly
Daily
Weekly
4 Weeks
BRUSH CUTTER 322R
$10.00
$45.00
$110.00
BRUSH CUTTER 232R
$10.00
$45.00
$135.00
$405.00
BRUSH CUTTER 265R
C/W HARNESS & HELMET
$60.00
$180.00
$540.00
* ** CUT OFF SAW 12” (GAS)
$50.00
$200.00
$425.00
* ** CUT OFF SAW 14” (GAS)
$65.00
$260.00
$520.00
* ** CUT OFF SAW 16” (GAS)
$75.00
$350.00
$600.00
* ** 12” ELECTRIC CUT-OFF SAW 12” OR 14”
$45.00
$180.00
$360.00
PORTABLE WATER TANK (FOR SAWS)
PUMP BOTTLE
$10.00
$40.00
$80.00
WATER CARRIER FOR 14 " CUT-OFF SAW
$15.00
$60.00
$180.00
CHAINSAW ( ELECTRIC)
SHARPENING CHARGE EXTRA (SEE BELOW)
$45.00
$135.00
$270.00
CHAINSAW KIT
C/W 15”, 16” OR 18” BAR
SHARPENING CHARGE EXTRA (SEE BELOW)
$50.00
$200.00
$400.00
394 WITH 24” BAR C/W KIT
SHARPENING CHARGE EXTRA (SEE BELOW)
$70.00
$250.00
$450.00
394 WITH 37” BAR C/W KIT
SHARPENING CHARGE EXTRA (SEE BELOW)
$80.00
$300.00
$630.00
3120 WITH 60” BAR C/W KIT
SHARPENING CHARGE EXTRA (SEE BELOW)
$85.00
$400.00
$720.00
*SEE SAFETY EQUIPMENT PAGE
* ALL BLADES AVAILABLE FOR SALE
** NOTE: BLADE CHARGE WILL APPLY WHEN ANY BLADE IS USED
*** SEE DIAMOND BLADE RENTAL
79
BLADE WEAR IS AN EXTRA CHARGE NOT INCLUDED IN SAW RENTAL RATES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
SAWS
Description
Hourly
Daily
Weekly
4 Weeks
$80.00
$300.00
$500.00
$30.00
$120.00
$360.00
$20.00
$60.00
$180.00
$8.00
$25.00
$50.00
RECIPROCATING SAW (SAWZALL)
$12.00
$48.00
$144.00
SKILL SAW 7 1/4” BLADE
$10.00
$24.00
$80.00
HILTI SKILL SAW 7-1/4” BLADE WSC 167
$25.00
$100.00
$300.00
8" METAL CUT SAW (MILWAUKEE)
SKILL SAW TYPE
*BLADE SOLD SEPERATELY
$55.00
TABLE SAW 10”
$50.00
$150.00
$450.00
**TILE SAW 7" - 10"
$65.00
$260.00
$520.00
14" MASONARY SAW TABLE / BRICK (ELECTRIC)
$90.00
$320.00
$640.00
$100.00
$400.00
$800.00
HUSQVARNA POLE SAW
SHARPENING CHARGES
CHAINSHARP→16” (UP TO 16”)
CHAINSHARP 16+ (16” AND ABOVE)
CHAINSHARP24”+ (24” AND ABOVE)
CHOPSAW ELECTRIC 14”
MITER SAW
14" (MAKITA LS1400)
12" (DEWALT)
JIG SAW
14" MASONARY SAW TABLE / BRICK (GAS)
TS355G
$10.00
$12.00
$20.00
* ALL BLADES AVAILABLE FOR SALE
** NOTE: BLADE CHARGE WILL APPLY WHEN ANY BLADE IS USED
*** SEE DIAMOND BLADE RENTAL
80
BLADE WEAR IS AN EXTRA CHARGE NOT INCLUDED IN SAW RENTAL RATES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
SAWS
Description
Hourly
Daily
Weekly
4 Weeks
VANCON CORE SAW 14” 230V 3HP
C/W CRATE, PUMP, STAND
$200.00
$660.00
$2000.00
K650 CUT-N-BREAK GAS 9", 16" CUT DEPTH
$100.00
$400.00
$1,200.00
K3000 CUT-N-BREAK ELECTRIC 110V 9”, 16” CUT
DEPTH
BLADE CHARGE SEE P.30
DIAMOND BLADES SEE P.30-31
$100.00
$400.00
$1200.00
ICS 633GC-14" GAS POWERED DIAMOND
CHAINSAW
$250.00
$1,000.00
$3,000.00
$55.00
$220.00
$660.00
14" SLAB SAW GAS WALK BEHIND F5309 (GAS)
$75.00
$260.00
$500.00
**20" ROADSAW 20HP (GAS)
FS25P0HE20
$90.00
$360.00
$1,080.00
$5.00
$20.00
$50.00
$15.00
$20.00
$25.00
$28.00
$30.00
$20.00
$25.00
$30.00
$40.00
$50.00
$60.00
$80.00
$100.00
$112.00
$120.00
$80.00
$100.00
$120.00
$160.00
$200.00
ICS SPEED HOOK SYSTEM
DIAMOND SAW
CHAIN CHARGE $18.00/THOUSAND
WATER DRUM C/W BALL VALVE & GHF
HOLE SAWS C/W ARBOR
BI-METAL 9/16” - 2”
BI-METAL
2” - 4”
BI-METAL
4 1/2”
BI-METAL
5”
BI-METAL
6”
CARBIDE TIPPED 3/4” - 2”
CARBIDE TIPPED 2” - 4”
CARBIDE TIPPED 4 1/2”
CARBIDE TIPPED 5”
CARBIDE TIPPED 6”
* ALL BLADES AVAILABLE FOR SALE
** NOTE: BLADE CHARGE WILL APPLY WHEN ANY BLADE IS USED
*** SEE DIAMOND BLADE RENTAL
81
BLADE WEAR IS AN EXTRA CHARGE NOT INCLUDED IN SAW RENTAL RATES
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
SCAFFOLDING
Description
Hourly
Daily
Weekly
4 Weeks
FRAME & BRACE TYPE
*Priced by the each
FRAMES
H 5ft x W 5ft FRAME (1.690 OD) 40lbs
SCAF5R
$5.00
$10.00
$20.00
H 3ft x W 5ft FRAM (1/2 FRAME) 30lbs
SCAF3R
$5.00
$10.00
$20.00
H 5ft x W 3ft FRAME (NF) 25lbs
SCANF3R
$5.00
$10.00
$20.00
BRACES
10x4ft CROSS BRACE 10ft 9in 14lbs
SCAB104R
$3.50
$7.00
$14.00
10x2ft CROSS BRACE (1/2 SECTION) 12lbs
SCAB102R
$3.50
$7.00
$14.00
7x4ft CROSS BRACE 8ft 1in 11lbs
SCAB74R
$2.50
$5.00
$10.00
7x2ft CROSS BRACE 87ft 1/2in (1/2 SECTION) 10lbs
SCAB72R
$2.50
$5.00
$10.00
5x4ft CROSS BRACE 6ft 4in 8lbs
SCAB54R
$2.50
$5.00
$10.00
DECKS / PLANKS
10ft ALUMINUM DECK 19” WIDE 42lbs
SCAAD10R
$6.00
$24.00
$72.00
7ft ALUMINUM DECK 19” WIDE 32.5lbs
SCAAD7R
$5.00
$20.00
$60.00
5ft ALUMINUM DECK 19” WIDE 21.5lbs
SCAAD5R
$4.00
$15.00
$40.00
3ft ALUMINUM DECK 19” WIDE 13.5lbs
SCAAD3R
$4.00
$15.00
$40.00
16ft MICRO PLANK W 9.5” x D 1.5ft 61.5lbs
SCAWP16RR
$10.00
12ft MICRO PLANK W 9.5” x D 1.5ft 48lbs
SCAWP12R
$9.00
10ft MICRO PLANK W 9.5” x D 1.5ft 40lbs
SCAWP10R
$8.00
8ft MICRO PLANK W 9.5” x D 1.5ft 29.5lbs
SCAWP8R
$6.00
6ft MICRO PLANK W 9.5” x D 1.5ft 24.5lbs
SCAWP6R
$6.00
5ft MICRO PLANK W 9.5” x D 1.5ft 20lbs
SCAWP5R
$5.00
4ft MICRO PLANK W 9.5” x D 1.5ft 14.5lbs
SCAWP4R
$5.00
3ft MICRO PLANK W 9.5” x D 1.5ft 13lbs
SCAWP3R
$5.00
WAGON 72in WIDE (FORM TYPE)
SCAWAGON
$40.00
$120.00
$360.00
8" CASTOR WHEELS W 8" x 6" SPIGOT 12lbs
SCA8CASR
$5.00
$10.00
$15.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
82
SCAFFOLDING
Description
Hourly
Daily
Weekly
4 Weeks
24" SCREWJACK BASE PAD ADJUSTABLE 12"
9.8lbs
SCA2450BPR
$5.00
$10.00
$15.00
24" SCREWJACK CASTOR HOLDERS 6.6lbs
SCA245JCHR
$5.00
$10.00
$15.00
36" SCREWJACK BASE PAD 24" ADJUSTABLE
9.8lbs
SCA36SJBPR
$5.00
$10.00
$15.00
$5.00
$10.00
$15.00
36" SCREWJACK CASTOR HOLDER
24" ADJUSTABLE 8.5lbs
BASE PAD 6" x 6" BASE 2lbs
SCABPR
$0.50
$2.00
$4.00
COUPLING PINS 1 3/8in DIAMETER 7" LONG 1 lbs
SCACPR
(NEW)
$0.50
$2.00
$4.00
TOGGLE PINS 12lbs / 100 PER
SCATPR
$0.50
$2.00
$4.00
$5.00
$20.00
$60.00
$5.00
$20.00
$60.00
$5.00
$20.00
$60.00
$6.00
$24.00
$72.00
$2.00
$4.00
$8.00
OUTRIGGER 30" WIDE 14lbs
HANGING BRACKET 24" WIDE 10lbs
SCAHBR
SAFETY RAILS
7ft SAFETY RAILSET 12 PIECES:
4x POSTS, 4x 7ft RAILS, 4x 5ft RAILS
12 PCS
SAFETY RAIL
10ft SAFETY RAILSET 12 PIECES:
4x POSTS, 4x 10ft RAILS, 4x 5ft RAILS
SAFETY RAIL
INDIVIDUAL GUARD RAIL PIECES
GUARD RAIL POST
3ft GUARD RAIL
SCA3GRR
$1.50
$3.00
$6.00
5ft GUARD RAIL
SCA5GRR
$1.00
$2.00
$4.00
7ft GUARD RAIL
SCA7GRR
$1.00
$2.00
$4.00
10fT GUARD RAIL
SCA10GRR
$1.50
$3.00
$6.00
TUBE SCAFFOLD - TUBELOC TYPE
2" TUBES SCHEDULE 40, 1.90OD
20ft TUBELOC TUBES
SCA20TLR
$21.00
15ft TUBELOC TUBES
SCA15TLR
$21.00
12ft TUBELOC TUBES
SCA12TLR
$10.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
83
SCAFFOLDING
Description
Hourly
Daily
Weekly
4 Weeks
10ft TUBELOC TUBES
SCA10TLR
$10.00
8ft TUBELOC TUBES
SCA8TLR
$9.00
6ft TUBELOC TUBES
SCA6TLR
$8.00
5ft TUBELOC TUBES
SCA5TLR
$8.00
4ft TUBELOC TUBES
SCA4TLR
$4.50
3ft TUBELOC TUBES
SCA3TLR
$4.50
RIGHT ANGLE CLAMP
SCARAR
$2.00
SWIVEL CLAMP
SCASWCR
$2.00
TUBE / FRAME RIGHT ANGLE CLAMP
SCARAR
$2.00
TUBE / FRAME SWIVEL CLAMP
SCA5WCR
$2.00
BEAM CLAMP
SCABEAMCLR
$5.00
3ft LADDER
SCALAD3R
$6.00
5ft LADDER
SCALAD5R
$7.00
STARTER BRACKETS
SCASTARTBKR
$4.00
OUTSIDE JOINER
SCAQJR
$3.00
TUBELOC BASE PAD
SCATLBPR
$2.00
PORTABLE UTILITY SCAFFOLDING
(BAKER TYPE)
UTILITY PORTABLE SCAFFOLDING SET 7
PIECES:
1x DECK, 2x FRAMES, 2x CASTERS, 2x BRACES
X2 ENDS
DAY = 8 hrs
X2 CROSS BAR
X1 DECK
X4 WHEELS
WEEK = 40 hrs
$20.00
$60.00
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
$80.00
84
SCAFFOLDING INDIVIDUAL PIECES
Description
Hourly
Daily
Weekly
4 Weeks
INDIVIDUAL PIECES
UTILITY END FRAME
$5.00
$10.00
$20.00
UTILITY BRACE
$2.50
$5.00
$10.00
UTILTY DECK
$5.00
$10.00
$30.00
UTILITY 5" CASTER
$5.00
$10.00
$15.00
TOE BOARDS 42” LONG
$5.00
$20.00
$60.00
TOE BOARD BRACKET
$3.00
$12.00
$36.00
SNOW CLEARING EQUIPMENT
Description
Hourly
HUSQVARNA BACKPAC BLOWER
Daily
Weekly
4 Weeks
$30.00
$120.00
$360.00
SNAPPER SNOW THROWER
SINGLE STAGE 20” 3HP
$10.00
$40.00
$160.00
SNAPPER SNOWBLOWER
2-STAGE 26” 8HP - 32" 11HP
(MIN. 3HRS)
$20.00
$100.00
$300.00
$900.00
SEE ALSO LOADERS (SKID-STEER) OR TRACTORS
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
85
SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S
Description
Hourly
SNOWMOBILE (MIN. 3 DAYS)
DEPOSIT REQUIRED
Daily
Weekly
4 Weeks
$250.00
$1000.00
$2,700.00
POLARIS INDY LONG TRACK/WIDE TRACK 500CC LIQUID COOLED ELECT START REV HAND
WARMER, THUMB WARMER, SKID PLATE, BACKREST, STORAGE RACK W/ TALL SHIELD
TRAPPER’S WOODEN SLEIGH
WITHOUT BOX
WITH BOX
SNOW SKIMMER (8 FT.)
STEEL OR ALUMINUM
WITH TIE DOWN RAILS
WITH BARREL RACK
$20.00
$30.00
$75.00
$117.00
$225.00
$350.00
$30.00
$100.00
$300.00
$40.00
$120.00
$360.00
ATV ARGO 8X8
$400.00
ATV ARGO 8X8 W/TRACKS
$500.00
RTV 900 - KUBOTA
$250.00
$1,000.00
$2,700.00
RTV 1100 - KUBOTA
RTV 1140 4 SECTOR – NO CAB
$300.00
$275.00
$1,500.00
$1,400.00
$3,500.00
$3,250.00
$50.00
$50.00
$60.00
$200.00
$200.00
$240.00
$600.00
$600.00
$720.00
$75.00
$300.00
$900.00
OUTBOARD MOTOR
JOHNSON/EVINRUD 9.9 HP SHORT SHAFT
EVINRUD 15HP LONG SHAFT
EVINRUD 25HP LONG SHAFT
TRAILER - SNOWMOBILE
2 POSITION
ALL DAMAGE, INSURANCE & TIRES ARE THE RESPONSIBILITY OF THE RENTER
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
86
SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S
Description
Hourly
Daily
Weekly
4 Weeks
TRAILER - UTILITY
TANDEM, 2 x 3500LBS AXLES, 7000LBS
CAPACITY 16 FT
$75.00
$300.00
$900.00
TRAILER - UTILITY
TANDEM 2 x 7000LBS AXLES, 14000LBS
CAPACITY 20 FT
$75.00
$300.00
$900.00
TRAILER - ARGO ATV TUB
$50.00
$200.00
$600.00
TRAILER - WELDER/GENERATOR
$20.00
$40.00
$100.00
$5.00
$20.00
$60.00
VAN - 45 FT TOOL CRIB/COFFEE ROOM
C/W LIGHTING, POWER HOOK-UP, FURNACE
$500.00
$1,500.00
$2,500.00
8X8X20 C-CAN
$150.00
$500.00
$900.00
HITCH - PINTLE OR BALL
ALL DAMAGE, INSURANCE & TIRES ARE THE RESPONSIBILITY OF THE RENTER
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
87
STAPLERS AND NAILERS
Description
Hourly
Daily
Weekly
4 Weeks
$6.00
$30.00
$60.00
ET-50 ELECTRIC ARROW STAPLER
3/8”, 1/2” OR 9/16”
$10.00
$30.00
$60.00
PA-200-516 PASLODE 1 1/8” 1/2” CROWN
3/4 - 2 1/2
$30.00
$85.00
$250.00
3150/38-N18 1/2” - 1 1/2” 3/16” CROWN
$30.00
$85.00
$250.00
MU-212-F PASLODE MUSTANG
FINISH NAILER
3/4” - 2 1/2”
$30.00
$85.00
$250.00
MU-114-W16R PASLODE MUSTANG
ROOFING STAPLER
5/8 - 1 1/2” 1” CROWN
$30.00
$85.00
$250.00
SK312 PASLODE CONSTRUCTION NAILER
2” - 4” (SPIKER)
$30.00
$85.00
$250.00
D-60 RAMSET POWDER ACTUATED
PERCUSSION TOOL
YELLOW SHOT ONLY
$35.00
$85.00
$255.00
MIFFS BOSTITCH FLOORING STAPLER
HARDWOOD FLOOR
$35.00
$105.00
$315.00
S32 BOSTITCH LAMINATE FLOOR NAILER
$30.00
$85.00
$250.00
IM250 PASLODE IMPULSE NAILER, (BRAD
NAILER), ANGLED 16GN
$35.00
$85.00
$255.00
PAM SHARPSHOOTER
FLOOR SCREW GUN
$35.00
$105.00
$315.00
PASLODE 3175*44 RC4 ROOFING NAILER
$35.00
$105.00
$315.00
PASLODE CORDLESS SPIKER
$40.00
$120.00
$360.00
T-50 STAPLER 1/4” X 3/4”
RAMSET D45A POWER
FASTENER RED & YELLOW
* NOTE* STAPLES AND NAILS AVAILABLE
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
88
STRAPPING & BINDING
Description
Hourly
Daily
Weekly
4 Weeks
STRAPPING DISPENSER
C/W CART, BAND CUTTING PLIER,
BAND TENSIONER, BAND CRIMPER
$20.00
$60.00
$180.00
AIRCRAFT CABLE CRIMPERS
$10.00
$40.00
$120.00
GROTE BATTERY CABLE CRIMPERS
$15.00
$60.00
$180.00
P-1 PUNCH LOCK TOOL
$10.00
$40.00
$120.00
CLIPS .10/EA
BAND $4.85/LB
TOOL BOXES / CARRY CASES / SEACAN
Description
Hourly
CHAINSAW CARY CASE
PELICAN CARRY CASE
24”L x 19”W x 13”D MODEL 1640
FOR HUSQVARNA, POWER HEAD, DRUM
DEHEADER, HILTI DD130
SEACAN 8’ x 8’ x 20”
DAY = 8 hrs
WEEK = 40 hrs
Daily
Weekly
4 Weeks
$5.00
$10.00
$20.00
$10.00
$30.00
$60.00
$200.00
$250.00
$600.00
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
89
TRAILER RENTAL RATES
Description
Hourly
Daily
Weekly
4 Weeks
SNOWMOBILE TRAILER (2” BALL)
$75.00
$300.00
$900.00
16FT TANDEM (7,000 LBS) CAR HAULER TRAILER
(2 – 3500 LBS AXLES) 2-5/16” BALL HITCH
$95.00
$380.00
$1,150.00
20FT TANDEM (14,000 LBS) EQUIPMENT TRAILER
(2 – 7000 LBS AXLES) C/W RAMPS 2-5/16” HITCH
$110.00
$450.00
$1,350.00
20FT TANDEM (14,000 LBS) EQUIPMENT TRAILER
(2 – 7000 LBS AXLES) 2-5/16” HITCH
$120.00
$500.00
$1,500.00
20FT TANDEM (14,000 LBS) TILT EQUIP. TRAILER
2-5/16” BALL HITCH
$120.00
$500.00
$1,500.00
GOOSENECK TRAILER – C/W RAMPS
30FT TRIAXLE (25FT 24,000 LBS TRIAXLE HIGH
BOY TRAILER)
$150.00
$600.00
$1,800.00
7FT X 12-14FT DUMP TRAILER (HYD) (14,000 LBS)
2-5/16” BALL HITCH
$150.00
$600.00
$1,800.00
24FT 7000LBS TANDEM TRAILER
$120.00
$360.00
$1,440.00
$20.00
$40.00
$100.00
$5.00
$10.00
$20.00
350LBS WELDER/PUMP TRAILER
2WHEEL DOT
HITCH RECIEVER 3-WAY COMB/ PINTLE
**NOTE: TIRE REPAIRS EXTRA - ALWAYS INSPECT TIRES**
TRACTORS
Description
Hourly
Daily
Weekly
4 Weeks
KUBOTA 2620-2920, 26-29 HP, 4 x 4 TRACTOR
$300.00
$835.00
$2,500.00
KUBOTA B3030 22HP 4 x 4 TRACTOR
C/W CAB
$400.00
$1,200.00
$3,600.00
SNOWBLOWER FOR ABOVE TRACTORS 62"
B2782
$250.00
$750.00
$2,250.00
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
90
WELDING, TORCHES AND CUTTING OUTFITS
Description
Hourly
Daily
Weekly
4 Weeks
SEELY 2070-2001FCP PLASTIC WELD KIT
W/COMPRESSOR
PLASTIC IS EXTRA
BROKEN ELEMENTS TO BE CHARGED TO
CUSTOMER
$50.00
$150.00
$450.00
OXYGEN/ACETYLENE WELD/CUTTING OUTFIT
C/W TANKS, GAS EXTRA
$45.00
$135.00
$270.00
PORTABLE OXY. / ACET. OUTFIT
C/W TANKS - GAS EXTRA
MINI KIT
$45.00
$105.00
$315.00
1/4" x 50FT OXY/ACC HOSE EXTENSION
$7.00
$14.00
$28.00
1/4" x 100FT OXY/ACC HOSE EXTENSION
$10.00
$20.00
$50.00
CYLINDER CART DOUBLE BIG BOTTLE
$18.00
$35.00
$80.00
PRESTOLITE TORCH OUTFIT
C/W TANK - GAS EXTRA
$20.00
$80.00
$240.00
PROPANE TORCH
$12.00
$48.00
$144.00
TIGER TORCH FLAME THROWER
C/W HOSE AND REGULATOR
LEAD MELTING POT
$12.00
$48.00
$144.00
$12.00
$48.00
$144.00
ARC WELDER (BUZZBOX)
LINDE 225 AMP (ELECTRIC)
$25.00
$75.00
$225.00
RECTIFIER 450 AMP ELECTRIC WELDER
SPECIFY VOLTAGE 220V - 575V
$95.00
$185.00
$350.00
$8.00
$16.00
$28.00
ARC WELDER MOSA MSG201/MPM165
150 AMP PORTABLE (GAS) DC WELDER
A/C 110V 2000 WATT C/W ACCESSORIES
75LBS
$50.00
$200.00
$600.00
ARC WELDER MOSA MPM200
200 AMP DC WELDER HONDA GAS
C/W 10’ STINGER & 10’ GROUND
$75.00
$300.00
$900.00
RECTIFIER WELDER CART
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
91
WELDING, TORCHES AND CUTTING OUTFITS
Description
Hourly
Daily
Weekly
4 Weeks
WELDER - 300AMP LINCOLN (DIESEL)
C/W 2-50’ EXT LEAD
1-10’ GROUND CABLE
1-10’ STINGER
TRAILER FOR ABOVE
$100.00
$400.00
$1,040.00
$20.00
$40.00
$100.00
MILLER BIG BLUE 402 400 AMP (DIESEL)
C/W:
1 – 10’ GROUND CABLE
1 - 10' STINGER CABLE
2 - 50' EXTENSION CABLE
$150.00
$555.00
$1,355.00
TRAILER FOR ABOVE
$20.00
$40.00
$100.00
PIPE STAND V-TOP ADJUSTIBLE
ROLLER HEAD FOR PIPE STAND
$15.00
$5.00
$40.00
$10.00
$70.00
$25.00
10' WHIP STINGER OR GROUND
$5.00
$15.00
$25.00
50’ X 2/0 WELD CABLE
$7.00
$21.00
$40.00
100’X2/0 WELD CABLE
$10.00
$30.00
$60.00
$8.00
$21.00
$52.50
$10.00
$20.00
$40.00
MILLER 14-PIN DIAL REMOTE 25FT
$8.00
$21.00
$52.50
MILLER 14-PIN EXTENSION 50FT
$5.85
$10.50
$18.65
MILLER 14-PIN EXTENSION 75FT
$14.00
$26.85
$49.00
$5.00
$20.00
$60.00
ROD OVEN 10LB, 110V
$20.00
$40.00
$60.00
ROD OVEN 150LBS, 110V
$25.00
$60.00
$200.00
LINCOLN 170A 220V MIG WELDER
GAS EXTRA
$80.00
$240.00
$720.00
$125.00
$500.00
$1,500.00
REMOTE CONTROL W/100’ CABLE
3-PRONG LINCOLN TYPE
REMOTE EXT CABLE 100’
3-PRONG LINCOLN TYPE
WELDING HELMET
LINCOLN POWER MIG 300 MIG WELDER
230-575 V
GAS EXTRA
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
92
WELDING, TORCHES AND CUTTING OUTFITS
Description
Hourly
Daily
Weekly
4 Weeks
$66.00
$190.00
$435.00
$120.00
$480.00
$1,320.00
AIR ARC GAUGER
$20.00
$50.00
$100.00
ARGON FLOWMETER
$20.00
$50.00
$105.00
$5.00
$20.00
$40.00
PLASMA CUTTER
LINCOLN TOMAHAWK 375
MILLER SPECTRUM
UP TO ½”
$75.00
$250.00
$650.00
PLASMA CUTTER
LINCOLN TOMAHAWK 625
MILLER SPECTRUM 250
UP TO ¾”
$135.00
$550.00
$1,600.00
$5.00
$20.00
$50.00
LINCOLN LN-25 PORTABLE SUITCASE WELDER
REQUIRES KP653-052 DRIVE ROLL KIT
REQUIRES MAGNUM 300 GUN & 15FT CABLE
PLASMA ARC CUTTER C/W 3/4" TORCH
SPARE PARTS KIT AVAILABLE
WELDING HELMET
OXYGEN - 2200/BOTTLE
LGE. BOTTLE - $150.00
SM. BOTTLE - $75.00
$0.10 / LB. APPROX
MIN. CHARGE $10.00
ACETYLENE – 250/BOTTLE
LGE BOTTLE - $640.00
SM BOTTLE - $320.00
$0.15 / LB APPROX
MIN CHG $10.00
PROPANE TANK 20LBS
TANK $42.00
1/2 TANK $25.00
MIN. $12.00
WEIGHT OF EMPTY BOTTLE = 17LBS
WEIGHT OF FULL BOTTLE = 37LBS
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
93
WELDING, TORCHES AND CUTTING OUTFITS
Description
Hourly
PROPANE TANK 30LBS
TANK $63.00
1/2 TANK $40.00
MIN. $20.00
Daily
$5.00
Weekly
4 Weeks
$20.00
$50.00
WEIGHT OF EMPTY BOTTLE = 25LBS
WEIGHT OF FULL BOTTLE = 55LBS
PROPANE TANK 40LBS
TANK $82.50
1/2 TANK $50.00
MIN. $25.00
WEIGHT OF EMPTY BOTTLE = 32LBS
WEIGHT OF FULL BOTTLE = 72LBS
DAY = 8 hrs
WEEK = 40 hrs
4 WEEKS = 160 hrs
RATES SUBJECT TO CHANGE WITHOUT NOTICE!
94