High Frequency Wireless
Camera and Bug Detector
(DO-CC360)
Features










High Frequency Signal Detector that can detect wireless transmitting devices
Detectable RF frequency from 1MHz to 6.5GHz for all RF frequency include GSM, WIFI,
Bluetooth, FM, VHF, UHF, 900/1200/2400 wireless audio and video transmission frequencies
Built in super bright red LED can find hidden cameras such as pin hole, button, mobile camera
etc.
Dual mode RF detection, buzzer mode and vibrate mode can also be used with earphone to
detect RF signal, without any sound from unit
Built in 500mA rechargeable Li-ion battery, operating time up to 6 hours for lens detector and
up to 15 hours for RF detector
4 signal strength led status indicator from low to high.
Adjustable RF Signal strength detects function.
Adjustable lens detector mode, with different flashing frequency.
Built in 500mA rechargeable LION Battery. Operating time up to 6 hours for lens detector, and
up to 15hours for RF Detector.
Easy to operate and compact.
Instruction
Detecting hidden Cameras
1. Turn the power on; the indicator light will turn blue.
2. Click the laser switch, the 6 LED light at the back will start blinking.
3. Scan the surrounding environment by moving the device vertically and horizontally, such as testing
in front of the camera lens, you should find a strong bright spot which is the camera lense.
4. If you continue to press and hold the switch, the LED will flash every 2 seconds faster, and then the
first 4 panel status light will flash.
5. Turn the switch off to turn off the laser scanning.

Sound Detection
1. Turn the power switch to the middle position, the power indicator light will turn blue.
2. Move around, the detector will make noise if transmission is detected. When the signal becomes
stronger, the four LED will light up at the same time, the sound will become louder and changes faster.
3. Pull out the antenna, adjust sensitivity to maximum, then you can expand your search.
4. Gradually shorten the antenna, then adjust the sensitivity in order to reduce the detection range,
you can eventually find the emission source.
5. use the headset for further detection.

Silent Detection (Vibration Detection)
1. The power switch is pushed to the top of the power indicator light (blue light)
2. when it detects signal, only the flashing lights and vibration.
3. Other operations with (a)

Compass
The instrument and increase the functionality is very important for professionals.

Battery Low prompt
When the internal battery is low, the 4th panel status light flashes.
-
In order to avoid interference when near mobile phones or wireless transmitters push the
antenna back down .
Technical Data
1. Laser detection camera from 10cm-10m (the naked eye can identify red flashing)
2. Radio detection of camera range 5cm-10cm (according to the decision transmit power from the
camera)
3. Power at 50mw-2000mw detection range 30-50cm.
4. Power at 300mw-600mw detection range 100-200cm.
5. Power at 800mw-1200mw detection range 300-1000cm.
6. Power built-in lithium battery 28 mAH.
7. Operating Current 8mA
8. Probe laser wavelength of 920mm.
9. Receive frequency range of 1MHz-6500MHz
10. Special filter lens
11. Material ABS
12. Size: 93mmx48mm917mm
Specification
Receive Frequency:
1MHz to 6.5GHz
Alarm Volume (within 1m): ≥90dB
Transmission Mode:
Certification:
Wireless
SGS, CE, ISO, FCC, RoHS
Type:
Application:
Detector
Indoor, Outdoor
Signal Transmission:
Working Mode:
Wireless Alarm
Active
Sensor Type:
Working Principle:
Vibration Alarm
Electro-Acoustic Style
LED Lens Detector:
Antenna Length:
Battery Capacity:
up to 70000 Mcd Bright
123mm
3.7V DC500mA
Power Consumption:
Dimension:
Under 100mA
65X48X15mm
Charger Voltage:
Detect frequency:
LED lens detector:
Dimension:
5-6VDC
1MHz to 6.5GHz
up to 70000 MCD Bright
65mmx48mmx15mm
Weight:
58g
Package Contains
1
1
1
1
x
x
x
x
Multi function Lens Detector
Charger
Earphone
User Manual