Length of
building
<25% or 2.5m (maximum width) which
ever is the lesser
a) Gable and gable-like roof ends where the roof ridge is generally at right
angles to the site boundary. The end of the ridge may be up to 1.5m
above the indicator height, and the end area when viewed in elevation is
allowed to be up to 2.5m2. These exceptions are limited to roofs with a
slope of 150 or greater. The maximum height intrusion, width, and area
must remain as defined above, i.e. 1.5m high, 2.5m wide, and 2.5m2. Up
to one intrusion may be permitted per boundary (see Chapter 2 (Meaning
of Words) for definition of ‘gable’).
Gable roof ends where the roof ridge is generally at right angles to the site
boundary. The end of the ridge may be up to 1.5m above the indicator
height, and the end area when viewed in elevation is allowed to be up to
2.5m2. ‘Gable’ may also include alternative roof forms that have the same
effects in terms of daylight. The maximum height intrusion and area must
remain as defined above i.e. 1.5m and 2.5m2.
2.5m maximum width
Nelson Resource Management Plan
A15- 5
b)
A15- 6
Aerials except dish antennas greater than 1m in diameter (refer to
aerials rules in each zone).
Nelson Resource Management Plan