Hardened concrete test
Compression
testing machine
ALPHA 3-3000 S
●accuracy according to
DIN EN ISO 7500-1, class 1
●execution acc. to EN 12390-4
(strain test execution)
●for compression strength
tests according to
EN 12390-3, EN 12504-1 and
EN 206
●separate drive station
AS-C20-N
●with automatical load
increase, control via digital
controller DIGIMAXX® C-20
in closed loop system
Technical dates - testing frame
Picture: Testing machine frame with chromium plated machine‘s columns (options)
made
in
Germany
●test load max.: 3,000 kN
●working pressure max.: 397 bar
●piston stroke: 100 mm
●upper platen: Ø 320 mm
●lower platen: Ø 300 mm
●thickness of platens: 75 mm
●hardness of platens: 55 HRC
●test chamber height: 340 mm
●clear distance between columns
(width): 355 mm
●clear distance between columns
(depth): 255 mm
●rigidity: 2,950 kN/mm
●measuring range: 60 ... 3,000 kN
●display range: 0 ... 3,000 kN
●electronic load measuring by pressure
transducer
●voltage: 3 x 400 Volt, 50 Hz, 1.5 kW
●weight: 1,810 kg
1
Technical dates - digital controller
●LCD-screen-display, 5 numbers, 16 Bit
processor technology
●resolution 60,000 Digits
●automatic zero point correction
●programmable calculation of the strength
of 30 different specimens as well as the
corresponding standard speeds
●display of the strength in N/mm² oder Mpa
●adjustable display in kN, N, kg, kp, to or
bar
●peak value memory and reset key
●code protected calibration / linearization
●serial interface RS 232 to recall the peak
value
Accessories:
for reduction of test chamber height
distance plates, not hardened, surface
A
grinded, for insert between compression
plate and piston. Fixture with locating pin.
dimensions Ø 300 x 50 mm, 27 kg
dimensions Ø 300 x 60 mm, 33 kg
distance pieces, hardened, surface grinB
ded, for put on of the compression plate
dimensions 210 x 210 x 110 mm, 38 kg
dimensions 170 x 170 x 50 mm, 12 kg
dimensions 120 x 120 x 50 mm, 5,65 kg
Picture: Drive Station AS-C-20N-PC (option)
C
●connection of further (max. 4) testing
machines
●bigger compression plates
dimensions 320 x 420 x 75 mm
dimensions 320 x 520 x 75 mm
●higher test chamber (working area)
●machine‘s columns chromium plated
●built in printer
●transfer software WinTrans
building material test software PROTEUS
C
centerring devices for compression plates
D
A
D
centerring devices for distance pieces
E
B
E
FORM+TEST Seidner & Co. GmbH
Post box 1154 • 88491 Riedlingen
phone: +49 (0) 7371 9302-0 • Fax: -99
www.formtest.de
[email protected]
2
PM 301.02E • ALPHA3-3000S.indd • 01/2014 • Technical modifications reserved!
Options: