3.5mm Male to 3.5mm Male Test Cable
60 Inch Length Using PE-P160 Coax
RF Cable Assemblies Technical Data Sheet
PE369-60
Configuration
• Connector 1: 3.5mm Male
• Connector 2: 3.5mm Male
• Cable Type: PE-P160
.
Electrical Specifications
Description
Minimum
Frequency Range
Typical
Maximum
Units
34
GHz
DC
VSWR1.4:1
Velocity of Propagation
RF Shielding
78 90 %
dB
Capacitance
26 [85.3]
pF/ft [pF/m]
Inductance
66 [216.54]
uH/ft [uH/m]
. Specifications by Frequency
Description
F1
F2
F3
F4
F5
Frequency
2.5 5 101834
Insertion Loss (Max.)
1.2
1.71
2.54
3.43
5.09
Units
GHz
dB
. Mechanical Specifications
Cable Assembly
Length
Diameter
60 in [152.4 cm]
0.33 in [8.38 mm]
Weight
0.17 lbs [77.11 g]
.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 3.5mm Male to 3.5mm Male Test Cable 60 Inch Length Using PE-P160 Coax PE369-60
PE369-60 REV 1.1
1
3.5mm Male to 3.5mm Male Test Cable
60 Inch Length Using PE-P160 Coax
RF Cable Assemblies Technical Data Sheet
Cable
Cable Type
Impedance
Inner Conductor Type
Inner Conductor Material and Plating
Dielectric Type
Number of Shields
Shield Layer 1
Shield Layer 2
Shield Layer 3
Jacket Material
Jacket Diameter
.
One Time Minimum Bend Radius
Typical Flex Cycles
PE369-60
PE-P160
50 Ohms
Solid
Copper, Silver
PTFE
3
Silver Plated Copper
Aluminum Tape
Silver Plated Copper
ETFE, Gray
0.16 in [4.06 mm]
0.8 in [20.32 mm]
10,000
Connectors
Description
Type
Impedance
Connector 1
Connector 2
3.5mm Male
3.5mm Male
50 Ohms
50 Ohms
Contact Material and Plating
Beryllium Copper, Gold
Beryllium Copper, Gold
Contact Plating Specification
ASTM-B488 50µ In. Minimum
ASTM-B488 50µ In. Minimum
Dielectric Type
PCTFE
PCTFE
Coupling Nut Material and Plating
Passivated Stainless Steel
Passivated Stainless Steel
Coupling Nut Plating Specification
SAE-AMS-2700
SAE-AMS-2700
5/16 Inch
5/16 Inch
Hex Size
Torque
8 in-lbs [0.9 Nm]
8 in-lbs [0.9 Nm]
Body Material and Plating
Passivated Stainless Steel
Passivated Stainless Steel
Body Plating Specification
SAE-AMS-2700
SAE-AMS-2700
.
Environmental Specifications
Temperature
Operating Range
-45 to +125 deg C
Compliance Certifications (visit www.Pasternack.com for current document)
For RoHS Compliant version, use PE369LF-60. Contact Pasternack if product cannot be found.
Plotted and Other Data
Notes:
• Values at 25°C, sea level.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 3.5mm Male to 3.5mm Male Test Cable 60 Inch Length Using PE-P160 Coax PE369-60
PE369-60 REV 1.1
2
3.5mm Male to 3.5mm Male Test Cable
60 Inch Length Using PE-P160 Coax
RF Cable Assemblies Technical Data Sheet
PE369-60
How to Order
PE369
Part Number Configuration:
|
|
|
|
|
Example: - xx
|
|
|
uu
|
Unit of Measure:
cm = Centimeters
<blank> = Inches
Length
Base Number
PE369-12 = 12 inches long cable
PE369-100cm = 100 cm long cable
3.5mm Male to 3.5mm Male Test Cable 60 Inch Length Using PE-P160 Coax from Pasternack Enterprises has same day
shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability
and are part of the broadest selection in the industry.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 3.5mm Male to 3.5mm Male Test Cable 60 Inch Length Using PE-P160 Coax PE369-60
URL: http://www.pasternack.com/3.5mm-male-3.5mm-male-pe-p160-cable-assembly-pe369-60-p.aspx
PE369-60 REV 1.1
3
PE369-60 REV 1.1
zzz
yy
-
xx
Examples
PE3000LF-100
PE3000-100
CM = Centimeters PE3000LF-100CM
< Blank > = Inches
PE3000-100CM
Length
uu
Part Number Configuration
LF = RoHS Compliant
< Blank > = Standard
Note: LF applies only to RF cables
00 - 99999
PE3
How To Order
SMA MALE
Length In Inches
12''
24"
36"
48"
60"
Custom Length
FSCM NO. 53919
PE369
DWG TITLE
Part # Ext.
-12
-24
-36
-48
-60
-xx
PE-P160
Length In Centimeters
25Cm
50Cm
75Cm
100Cm
125Cm
Custom Length
CAD FILE
061213
SCALE N/A
SIZE A
2233
NOTES:
1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL.
2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME.
3. DIMENSIONS ARE IN INCHES [mm].
4. LENGTH TOLERANCE IS ± 1.5% OR 3/8", WHICHEVER IS GREATER.
Part # Ext.
-25CM
-50CM
-75CM
-100CM
-125CM
-xxCM
SMA MALE
3.5mm Male to 3.5mm Male Test Cable 60 Inch Length Using PE-P160 Coax
PE369-60 CAD Drawing
4