NEMO WINDCATCHER - ATT MODULE
Release Notes
ANITE NEMO
Windcatcher Ver 3.5.5.0
Updated: 9 Feb 2016
Support
For All customers
Email: [email protected]
Phone : 703-714-1966
Current Version
2/3/16 New Phase3 / Windcatcher Ver 3.5.5.0


Support for JDSU Truesite 1.40a1, 1.41
Support of TEMS pocket 15.3.1
Older Versions
12/15/15 New Phase3/ Windcatcher Ver 3.5.4.5


Support for MCEM 3.1.0.0
New KPI Report introduced – support for LTE/UMTS/VoLTE/LTE Float device Reporting
Report designed as per Walk test Kit configuration proposed by ASG
11/16/15 New Phase3/ Windcatcher Ver 3.5.4.1
New Features
&
Enhancement





Support for JDSU Truesite 1.40a
Support for TEMS Pocket 15.3
Support for MCEM 3.0.1.0
JDSU API Processing Added
New KPI Report introduced – support for LTE/UMTS/VoLTE Reporting
Report designed as per Walk test Kit configuration proposed by ASG
11/23/15 New Phase3/ Windcatcher Ver 3.5.2.3



Support for JDSU Truesite 1.39.2
Support for TEMS Pocket 15.0
Support for Falcon Smart 2.1.0.11 (Processing only available, no reports available in this WC version)
3/26/15 New Phase3/ Windcatcher Ver 3.5.0.3




Added support for JDSU Truesite 1.38
Added support for TEMS Pocket 14.4 & 14.5
VoLTE added to KPI Report & UE Map report
Integrated ATT Report Manager into Project Manager within the Windcatcher UI
11/4/14 New Phase3/ Windcatcher Ver 3.3.7.6








Added support for JDSU Truesite 1.37
Added support for JDSU Ranadvisor 18.1.4
Added support for MCEM collection tool
Added support for DRT + MCEM
Added support for JDSU Truesite + DRT
Online Maps for Macro (except Macro ingress & Delta)
Throughput Logic when FTP is in session added for JDSU Truesite 1.37
Throughput Logic when FTP is in session added for TEMS Pocket 14.3

All DAS scenarios added to MCEM collection such as ENT, EXT, TRD, TRW and MAC
10/17/14 New Phase 3 Ver 1.2.9/ Windcatcher Ver 3.3.7.5
This is an Ascom specific Windcatcher release tested and validated ONLY for latest Ascom Pocket formats.





Support for Ascom Pocket 14.3 & 14.2
Support for Ascom Collected with Samsung & Sony
DRT Support for Ascom Pocket 14.3 & 14.2
PcTel Seegul IbFlex Scanner support for JDSU
Antenna Validation Report **New**
8/22/14 New Phase3 Ver 1.25/ Windcatcher Ver 3.3.7.3

Multiple Building Support
7/2/14 New Phase3 Ver 1.25/ Windcatcher Ver 3.3.7.1











New plots added- Dominant PSC and Dominant PCI plots added to UE Map.
Map Alignment changed to mirror the floor plan
Distinct colors for PSC and PCI added and the User Interface has been opened for users to make further
changes if required.
New ASG Thresholds added to Executive Summary Sheet
MIMO and SIMO dropdown selections added on exec sheet.
Updated Throughput thresholds for LTE and UMTS
New Color Theme for ATT Report Manager
Dominant PSC and Dominant PCI plots added to UE Map.
New config file for Manual Plots for Batch printing- the config file contains ASG thresholds for RSCP, EcIo,
RSRP and RSRQ
New patch utility for installing the templates.
Report Cosmetics & formatting enhanced with metric grouping
Current Version
Fixed Issues
2/3/25 New Phase3 / Windcatcher Ver 3.5.5.0


Ping task in data task statistics table (.drm)
Issues with generating new phase 3 reports for inbuilding data
Older Versions
6/23/15 New Phase3/ Windcatcher Ver 3.5.2.3

VoLTE Retainability formula Update
Retainability Success Count:
[SIP INVITE REQUEST – SIP SESSION SETUP FAILURE – SIP SESSION SETUP (FILE END)] – (SIP SESSION FAILURE + SIP SESSION END FILE END)



The blue portion of the formula indicates the invites that passed the call setup phase and entering the call retainment phase
The yellow portion indicates the retained calls that failed and the retained calls that ended with file ends
The complete formula gives successfully retained calls
Retainability Failure Count: Calls that were not retained: Count of (SIP SESSION FAILURES )
Retainability Success Rate = Retainability Success Count / (Retainability Success Count+ Retainability Failure Count)
3/26/15 New Phase 3 Ver 1.30/ Windcatcher Ver 3.3.7.6 Rel A



Fixed transmission mode in Exec summary
TEMS null encryption for Volte
MOS vs PCI Histogram fixed
11/04/14 New Phase 3 Ver 1.30/ Windcatcher Ver 3.3.7.6 Rel A


MACRO drive data prefix issue resolved
TEMS Interpolation logic updated
10/17/14 New Phase 3 Ver 1.25/ Windcatcher Ver 3.3.7.5 Rel A



Tems Interpolation issue - Added GPS Interpolation support for the new TEMS RouteReader API 10.1
Histogram PDF/ CDF fix
Retainability Combined stat resolved in KPI report
8/22/14 New Phase3 Ver 1.25/ Windcatcher Ver 3.3.7.1



Throughput Logic updated for JDSU Ran Advisor
UMTS venue level RSSI Histogram Fixed.
Thresholds extended for some metrics to cover all values.
7/2/14 New Phase3 Ver 1.25/ Windcatcher Ver 3.3.7.1







UE & Scanner Report- Map Category in the UE and Scanner reports fixed.
UE Map- Delta Map legend and images fixed and separated.
KPI Report-Rssi and TX Power formulas in the Exec Summary sheet fixed
All Reports- UMTS 850 Partial route ARFCN missing issue resolved.
All reports- Formatting issues on all templates.
UE Map-LTE Data transmission Mode resolved for JDSU collection.
Distribution Charts to show only channels that are present.
1.
2.
3.
Known Issues
4.
5.
6.
JDSU Truesite - PDSCH throughputs showing unfiltered values and PUSCH not being reported
KPI Report - LTE RACH Statistics are not reported
UE Map- The first plot of delta maps is a delta between the same device and shows no maps if the channels
are across different bands.
In JDSU Truesite 1.37, DRT Single tuner supported in reports but double tuner not supported- ongoing
implementation
‘Time in DAS’ calculations and Pie-Charts have not been modified as per latest Walk Test Configuration (In
Roadmap for up-coming releases)
UE Map Report currently does not segregate devices as Float or Locked (in Roadmap for up-coming releases)