ZP
900 DIGITAL
POST, MAIL &
SHIPPING SCALE
High performance post,
mail & shipping scale
designed for demanding
shipping environments.
Technical Specification
DESCRIPTION
The ZP900 is a highly accurate digital post, mailing and shipping scale. This high speed, high performance shipping scale will
display and transmit data and integrate with back office to POS systems. It provides the flexibility needed to manage vital
weight data within your operation.
Features the very latest Quartzell™ technology to guarantee speed and accuracy. Communicates via RS232, or optional USBHID and Ethernet, allowing easy integration into existing third party software systems used around the world.
SPECIFICATIONS
GENERAL
Connectivity
2 x RS232 Bi-directional
Optional
2 x USB HID (Mini USB )
1 x Ethernet port (server only)
Display Options
Up to 2 active displays: One weight indicator and one remote display. Options available are base
mounted display, pole mounted display, pole mounted dual display and desk mount displays
Supported Protocols
SMA, NCI, ECR and D901
Operating Systems
USB HID supports OPOS & UPOS on Microsoft operating systems with Windows XP, Windows 7 and
Windows 8. Serial RS232 communication also available
Unit of Measure
1 unit of measure is standard in lb or kg. A 2nd unit of measure in lb, kg, grams, oz or lb-oz can be
enabled
Capacity Selections
Two main base capacities available, 70 lb (35 kg) and 150 lb (80 kg) both using single or multi-range
operation. Configurable up to 3 ranges with resolution up to 10,000 divisions per range
1
ZP900 POST & SHIPPING SCALE
Technical Specification
GENERAL
Incremental Selections
Multiples of 1, 2 or 5 with division size starting at 0.001
Metrology Selections
Capacity, Division Size, Units of Measure, Motion, Auto Zero Tracking (AZT), Filtering, Initial and Operating Zero
Range, Over/Under Capacity Ranges, Multi-Range/Interval Operation and Normal Scale/Weight Classifier
Rounding
Time and Date
Battery back up time/day/year (12 hour or 24 hour format)
Calibration
Two to five points stored calibration with Gravity Compensation and Initial Start-Up Gravity adjustment
prompting
All metrology data stored directly in the base
Digital Filtering
Harmonizer filtering available for unstable installations
Self Diagnostics
Display, keys, serial ports, digital scale readings (crystal counts and compression and tension frequencies)
USER INTERFACE
Keypad
ZERO, F1 and four navigation keys
Status Annunciators
Zero, Motion, Gross, Battery Status, Weight Range 1/2/3, lb, kg, alternate unit of measure, optional Ethernet
activity
Display
IBN illuminated, 0.5” (13 mm) high 7 segment 7-digit, green on black background for high contrast and wide
angle viewing
Displayed Resolution
Agency approved up to 10,000 divisions per range with up to 3 range settings
Display Rate
Selectable 1, 2, 5, or 10 times per second
Desk-mount displays
Operator and Customer
Pole-mount displays
single or double-sided
Base-mount
Operator Display
PHYSICAL /ENVIRONMENTAL
2
Base Enclosure
Robust aluminum die cast housing fitted with lipped stainless steel weight platter that is securely fixed to the
base. The base is also fitted with four adjustable anti-slip feet standard
Display Enclosures
ABS plastic
Load Cell Technology
High accuracy digital Quartzell
Operating Temperature
41° F to 104° F / +5° C to 40° C (Approvals) at 10 to 90% humidity
-4° F to 140° F / -20° C to 60° C (industrial) at 10 to 90% humidity
Return to Zero Speed
Stable Zero using up to 10% capacity 1.20 seconds ; 10% to full capacity 1.40 seconds
Humidity
10% to 90% relative, non-condensing
Base Construction
Clam shell base design with a centrally positioned suspended digital Quartzell cell
Overload Protection
Up to 1100% overload protection based off the 80 kg base structure via our patented spring
protection system
Corner Loading
100%
IP Protection
Designed to meet IP31
BASE CAPACITY/RESOLUTION
Base Size
Imperial Capacity and Resolution Available
Metric Capacity and Resolutions Available
9” x 12” (230 mm x 305 mm)
Max1/d1
Max1/d1
Max2/d2
Max3/d3
70 lb / 35 kg base
Max2/d2
Max3/d3
10 kg x 1 g
20 kg x 2 g
70 lb x 0.01 lb
30 kg x 5 g
0-10 lb / 0.002 lb
0-70 lb / 0.01 lb
0-10 lb / 0.002 lb
0-30 lb / 0.005 lb
35 kg x 5 g
0-70 lb / 0.01 lb
70 lb x 0.2 oz
12” x 14” (305 mm x 350 mm)
0-10 lb x 0.05 oz
0-70 lb / 0.2 oz
Max1/d1
Max2/d2
Max3/d3
70 lb / 35 kg base
0-5 kg / 0.001 kg
0-30 kg / 0.005 kg
0-6 kg / 0.001 kg
0-30 kg / 0.005 kg
0-6 kg / 0.001 kg
0-20 kg / 0.002 kg
0-30 kg / 0.005 kg
0-6 kg / 0.001 kg
0-20 kg / 0.002 kg
0-35 kg / 0.005 kg
0-6 kg / 0.001 kg
0-35 kg / 0.005 kg
Max1/d1
Max2/d2
Max3/d3
10 kg x 1 g
20 kg x 2 g
70 lb x 0.01 lb
30 kg x 5 g
0-10 lb / 0.002 lb
0-70 lb / 0.01 lb
0-10 lb / 0.002 lb
0-30 lb / 0.005 lb
35 kg x 5 g
0-70 lb / 0.01 lb
70 lb x 0.2 oz
0-5 kg / 0.001 kg
0-30 kg / 0.005 kg
0-6 kg / 0.001 kg
0-30 kg / 0.005 kg
0-6 kg / 0.001 kg
0-20 kg / 0.002 kg
0-30 kg / 0.005 kg
0-6 kg / 0.001 kg
0-20 kg / 0.002 kg
0-35 kg / 0.005 kg
0-6 kg / 0.001 kg
0-35 kg / 0.005 kg
Max1/d1
Max2/d2
0-10 lb / 0.05 oz
0-70 lb / 0.2 oz
12” x 14” (305 mm x 350 mm)
Max1/d1
Max2/d2
150 lb / 80 kg base
100 lb x 0.01 lb
50 kg x 5 g
150 lb x 0.02 lb
80 kg x 10 g
Max3/d3
0-10 lb / 0.005 lb
0-100 lb /0 .01 lb
0-5 kg / 0.002 kg
0-50 kg / 0.005 kg
0-10 lb / 0.005 lb
0-150 lb / 0.02 lb
0-5 kg / 0.002 kg
0-75 kg / 0.010 kg
0-10 lb / 0.005 lb
0-100 lb / 0.01 lb
0-20 kg /0.002 kg
0-50 kg / 0.005 kg
0-10 lb / 0.1 oz
0-100 lb / 0.2 oz
0-20 kg / 0.002 kg
0-80 kg / 0.01 kg
0-10 lb / 0.1 oz
0-150 lb / 0.5 oz
0-10 lb / 0.1 oz
0-150 lb / 0.5 oz
0-150 lb / 0.02 lb
Max3/d3
0-80 kg / 0.01 kg
0-150 lb / 0.5 oz
100 lb x 0.2 oz
150 lb x 0.5 oz
ELECTRICAL
Circuitry Protection
RFI, EMI and ESD protection
OPTIONS
Ball Top Option
Designed to fit on the 12” x 14” (305 mm x 355 mm) base, this 10 ball stainless steel ball top makes it ideal to roll heavy
boxes on and off the scale
Carry Handles
Optional carry handles can be retro fitted to allow the scale base to be easily carried around
Counter Lock Down Plate
Bolt down plate to stop the scale base from being moved from the counter
USB Option
2 USB ports to communicate to 2 PCs
Ethernet Option
1 Ethernet port to communicate to 1 PC
Internal Battery Option
Battery pack mounted on the rear of the base with internal recharger. 20 hours operation between
charges (charge time 4 hours)
3
INDICATES LOCATION
OF CHANGES FOR
THAT REVISION
AA
ZONE
ISSUE
DESCRIPTION
AA
PRODCUTION RELEASE. ECO-
NOTES:
1.
ZP900-PD1 SHOWN. ZP900-PT1 DIMENSIONALLY EQUIVALENT, WITH THE
ONLY DIFFERENCE BEING THE OVERLAY HAS NO KEYS.
7
D
6
5
7
8
ZP900 POST & SHIPPING SCALE
8
Technical Specification
4
3
2
AA
INDICATES LOCATION
OF CHANGES FOR
THAT REVISION
ZONE
8
ISSUE
DESCRIPTION
BY
DATE
APPR
AA
PRODUCTION RELEASE. ECO-513945
GSA
27 MAY 2015
CCH
3.08 [78 mm]
g
3.08 [78 mm]
7
7.92 [201 mm]
7.92 [201 mm]
5
6
4.93 [125 mm]
4.93[125
[125 mm]
4.93
mm]
D
D
D
5
6
1
DRAWING ISSUE RECORD
3.29 [84 mm]
D
4.49 [114 mm]
7
8
[113 mm]
4.43
84.43[113
6 mm]
C
7
6
5
5
4
4
3
AA
D
INDICTOR
SHOWN
1.
ZP900-PD1 INDICATOR
SHOWN. ZP900-PT1 DIMENSIONALLY EQUIVALENT, WITH THE
SHOWN
ONLY DIFFERENCE
BEING THE OVERLAY HAS NO KEYS.
1.
3
2
1
DRAWING ISSUE RECORD
ISSUE
DESCRIPTION
BY
AA
PRODCUTION RELEASE. ECO-513945
GSA
14.49 [368ZONE
mm] ISSUE
REMOTE DISPLAY
ZP900-PD1 SHOWN. ZP900-PT1 DIMENSIONALLY EQUIVALENT,
WITH THE
ONLY DIFFERENCE BEING
7
8 THE OVERLAY HAS NO KEYS.SHOWN
BLANK
SHOWN
6
C
5
17.38 [442 mm]
h
THAT REVISION
DRAWING ISSUE RECORD
DESCRIPTION
AA
14.49 [368 mm]
CCH
PRODCUTION RELEASE. ECO-513945
4
3
AA
D
3.08 [78 mm]
12.83 [326 mm]
12.83 [326 mm]
C
4.93 [125 mm]
9.28[236
[236 mm]
9.28
mm]
C
B
5
INDICATES LOCA
OF CHANGES FO
THAT REVISION
3.77 [96 mm]
D
4.46 [113 mm]
6
2
INDICATES LOCATION
OF CHANGES FOR
APPR
DATEAA
27-Apr-15
D
17.38 [442 mm]
B
ZONE
NOTES:
NOTES:
C
INDICATES LOCATION
OF CHANGES FOR
THAT REVISION
4
3
2
AA
INDICATES LOCATION
OF CHANGES FOR
THAT REVISION
ZONE
13.74
[349
13.74[349
[349mm]
mm]
13.74
mm]
1
DRAWING ISSUE RECORD
2X .22
ACCEPT
SCREW
TO SURF
7.87[200
[200mm]
mm]
7.87
[200
7.87
mm]
f
2.932.93
[75 mm]
[75 mm]
ISSUE
DESCRIPTION
BY
DATE
APPR
AA
PRODUCTION RELEASE. ECO-513945
GSA
27 MAY 2015
CCH
B
1.16 [30 mm]
12.
1.16 [30 mm]
a
14.50 [368 mm]
14.50 [368 mm]
4.43 [113 mm]
4.43 [113 mm]
4.72 [120 mm]
C
3.29[84
[84 mm]
3.29
mm]
2.91 [74.0 mm]
3X .27 [7 mm] THRU
ACCEPTS 6mm OR
1/4" SCREW FOR
MOUNTING TO SURFACE
4.72 [120 mm]
C
mm]
4.49 [114 mm]
4.49 [114 mm]
BOTTOM VIEW WITH
INDICATORS REMOVED
SHOWING MOUNTING HOLES
8
B
B
MODEL #
ZP900-PH1
ZP900-PR1
ZP900-PP1
UNLESS OTHERWISE SPECIFED, ALL
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIRD ANGLE PROJECTION
SIDE #1
SIDE #2
INDICATOR REMOTE
9.28 [236
mm]
3.77
[96 mm]
REMOTE
BLANK
©2015 ITW group of companies. All rights
INDICATOR BLANK
reserved. No part of this publication may be
3.77 [96 mm]
5.86 [149mm] MAX
5.37 [136mm] MIN
e
5.86 [149mm] MAX
5.37 [136mm] MIN
reproduced, stored in an electronic retrieval system,
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
mark of the ITW group of companies. This
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at
any time.
MATERIAL
SHOWN
4
5
OUTLINE DRAWING,
POLE MOUNT ASSY,
ZP900-PH1, PRT, PP1
27-May-15
SIZE
D
NOT APPLICABLE
FOOT 1.61 [41 mm]
©2015 ITW group of companies. All rights
reserved. No part of this publication may be
reproduced, stored in an electronic retrieval system,
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
mark of the ITW group of companies. This
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at
any time.
ISSUE
SHEET
2
THIRD ANGLE PROJECTION
11.50
[292 mm]
FOOT1.61
1.61 [41
[41
mm]
FOOT
mm]
AA
AWT35-501486
DWG. NO.
SCALE
C
3
A
3.77 [96 mm]
21-Apr-15
i SCREW FOR MOUNTING
4
FOOT 1.61 [41 mm]
EW WITH
REMOVED
NTING HOLES
©2015 ITW group of companies. All rights
reserved. No part of this publication may be
reproduced, stored in an electronic retrieval system,
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
mark of the ITW group of companies. This
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at
any time.
11.50 [292 mm]
Base Size
9” x 12”
MODEL #
ZP900-PH1
ZP900-PR1
ZP900-PP1
12” x 14”
6
8
a
SIDE #1
SIDE #2
INDICATOR REMOTE
REMOTE
BLANK
INDICATOR BLANK
13.00
A
12.00
©2015 ITW group of companies. All rights
reserved. No part of this publication may be
reproduced, stored in an electronic retrieval system,
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
mark of the ITW group of companies. This
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at
any time.
14.50
5
b
6THIRD ANGLE PROJECTION
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
ANGLES  1 DEG.
HOLE DIA TOLERANCES
THREADS
EXT.
INT.
.000-.250 +.003/-.002
CLASS CLASS
.251-.500 +.005/-.003
2A
2B
OVER .500 +.010/-.005
9.00
MATERIAL
13.50
a
MaxPN AWT35-501485
Min
6
d
DO NOT SCALE DRAWING
5 REMOVE
BURRS & SHARP EDGES
APPROVALS
CHECK
MECH ENG
ELEC ENG
21-Apr-15
27-May-15
12.00
12.50
NOT APPLICABLE
SIZE
D
SCALE
3
DWG. NO.
5.75
5.27
5.86
5.37
AWT35-501486
SHEET
2
8
b
OUTLINE DRAWING,
POLE MOUNT ASSY,
ZP900-PH1, PRT, PP1
9.50
Cory Hainy
e
1000 Armstrong Drive, Fairmont, MN 56031, USA
DATE
Greg Abel
DRAWN
4
Avery Weigh-Tronix,
LLC
FINISH
NOT APPLICABLE
4
DIMENSIONS (millimeters)
Base Size
c
7
UNLESS OTHERWISE SPECIFED, ALL
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
2
.82 [21 mm]
.82 [21 mm]
ISSUE
AA
1 OF 1
A
f
7
UNLESS OTHERWISE SPECIFED, ALL
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
ANGLES  1 DEG.
HOLE DIA TOLERANCES
THREADS
EXT.
INT.
.000-.250 +.003/-.002
CLASS CLASS
.251-.500 +.005/-.003
2A
2B
OVER .500 +.010/-.005
MATERIAL
MECH ENG
Cory Hainy
©2015 ITW group of companies. All rights
reproduced, stored in an electronic retrieval system,
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
mark of
the ITW group
of companies.
This
SIZE
DWG.
NO.
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at
any time.
SCALE
ELEC ENG
3
D
NOT APPLICABLE
4
g
h
2
3 PLACE DECIMALS .010
1 DEG.
ANGLES
HOLE DIA TOLERANCES
THREADS
EXT.
INT.
.000-.250 +.003/-.002
CLASS CLASS
.251-.500 +.005/-.003
2A
2B
OVER .500 +.010/-.005

OUTLINE DRAWING,
10.00 [254
j mm] MOUNT ASSY,
DESKTOP
ZP900-PD1, PT1
28-May-15
reserved. No part of this publication may be
FINISH
NOT APPLICABLE
5
21-Apr-15
MATERIAL
NOT APPLICABLE
AWT35-501487
i
2.18
2.33
11.50
10.00
2.93
3.08
14.50
11.50
SHEET
3
Max
d
Min
e
6
f
5
A
CHECK
MECH ENG
ELEC ENG
h
i
DATE
Greg Abel
21-Apr-15
Cory Hainy
28-May-15
ZP900-PD1
FINISH
ISSUE
AA
SIZE
D
NOT APPLICABLE
j
THIRD ANGLE PROJECTION
7.00
10.00
©2015 ITW group of companies. All rights
reserved. No part of this publication may be
reproduced, stored in an electronic retrieval system,
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
mark of the ITW group of companies. This
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at
any time.
DWG. NO.
2
UNLESS OTHERWISE SPECIFED, ALL
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
ANGLES  1 DEG.
HOLE DIA TOLERANCES
THREADS
EXT.
INT.
.000-.250 +.003/-.002
CLASS CLASS
.251-.500 +.005/-.003
2A
2B
OVER .500 +.010/-.005
MATERIAL
330
305
228
241
146
134
55
59
292
254
178
368
343
305
318
149
136
75
78
368
292
254
APPROVALS
*pending
10,000d NTEP up to 3 multi-range (Certificate No 15-028)
10,000 Canadian AM* approval multi-range
10,000d EC* /OIML* multi-range
Measurement
Canada Approved
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
4
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2015 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
DO
REMOV
APP
DRAWN
CHECK
MECH ENG
ELEC ENG
FINISH
NOT APPLICABLE
j
230 mm x 305 mm
AWT35-5
SCALE
3
4
g
1000 Armstrong Drive, Fairmo
1.29
[33 mm]
1.29 [33mm]
MAXMAX
OUTLINE DR
.80 [14mm] MIN
.80
[14 mm] MIN DESKTOP MOU
APPROVALS
DRAWN
1 OF 1
1
Avery Weigh-T
REMOVE BURRS & SHARP EDGES
1000 Armstrong Drive,2 Fairmont,
MN 56031,
.03 USA
PLACE DECIMALS
DATE
Greg Abel
CHECK
5
PN AW
DO NOT SCALE DRAWING
Avery Weigh-Tronix, LLC
REMOVE BURRS & SHARP EDGES
APPROVALS
6
UNLESS OTHERWISE SPECIFED, ALL
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIRD ANGLE PROJECTION
DO NOT SCALE DRAWING
DRAWN
PN AWT35-501487
5
305 mm x 350 mm
Agencies
ACCEPTS 5mm O
DWG. NO.
SCREW
FOR MO
AW
D TO SURFACE.
SIZE
SCALE
6
1
7
c
ELEC ENG
NOT APPLICABLE
B
7
BOTTOM
VIEW
8
5.86 [149mm] MAX
5.37 [136mm] MIN
B
A
7 DATA CHART
10.
OUTLIN
DESKTOP
2X .22 ZP90
[5.5 mm]
8.43 [214 mm]
BOTTOM VIEW
30°
DIMENSIONS (inches)
8
21-Apr-15
28-May-15
DESKTOP SURFACE
DESKTOP
SURFACE
DESKTOP SURFACE
3X .27 [7 mm] THRU
ACCEPTS 6mm OR
1/4" SCREW FOR
MOUNTING TO SURFACE
0 mm]
MECH ENG
c
A
30°
2.73[69
[69 mm]
2.73
mm]
1000 Armstrong Dr
DATE
Greg Abel
Cory Hainy
CHECK
FINISH
3
d
8
A
APPROVALS
DRAWN
NOT APPLICABLE
12.51 [318 mm]
8.43 [214 mm]
THIRD ANGLE PROJECTION
mm]
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
ANGLES  1 DEG.
HOLE DIA TOLERANCES
THREADS
EXT.
INT.
.000-.250 +.003/-.002
CLASS CLASS
.251-.500 +.005/-.003
2A
2B
OVER .500 +.010/-.005
12.00 [305 mm]
13.50 [343 mm]
B
REMOVE BURRS & SHARP EDGES
11.50 [292
mm]
ACCEPTS
5mm OR #10
5
P
Avery Wei
DO NOT SCALE DRAWING
2X .22 [5.5 mm] THRU
MATERIAL
1 OF 1
1
1.16[30
[30 mm]
mm]
1.16
A
3.98[101
[101 mm]
3.98
mm]
30°
UNLESS OTHERWISE SPECIFED, ALL
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
TO SURFACE.
6
7
1000 Armstrong Drive, Fairmont, MN 56031, USA
DATE
FINISH
NOT APPLICABLE
13.74 [349 mm]
Avery Weigh-Tronix, LLC
REMOVE BURRS & SHARP EDGES
14.50 [368 mm]
3.98 [101 mm]
BOTTOM VIEW
DO NOT SCALE DRAWING
APPROVALS
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
Greg Abel
DRAWN
ANGLES  1 DEG.
CHECK
HOLE DIA TOLERANCES
THREADS
EXT. MECH ENG
INT.
.000-.250 +.003/-.002
Cory Hainy
CLASS CLASS
.251-.500 +.005/-.003
2A
2B
OVER .500 +.010/-.005
ELEC ENG
7.87 [200 mm]
4.46
[113 mm]
BLANK
4.46
[113
mm]
2.93 [75 mm]
8
12.83 [326 mm]
C
PN AWT35-501485
DATA CHART
A
4.46 [113 REMOTE
mm]
DISPLAY
SHOWN
6
7
B
B
30°
C
9.28 [236 mm]
b
13.50 [343 mm]8.43 [214 mm]
D
DESKTOP SURFACE
.49 [12.5 mm]
A
12.
13.50 [343 mm]
14.49 [368 mm]
2.73[101
[69 mm]
3.98
mm]
zp900series_spec_UK_501423.indd
V1 AWT35-501423
N