ATS-186K SERIES
U V
S Y S T E M S
Control System Stand (optional)
ATS-186K SERIES
U V
S Y S T E M S
4 Log (99.99%) Reduction of Bacteria,
Cryptosporidium and Virus
Amalgam Short Vertical
UV Systems
Wall mounted Control System (standard)
All ATS Units are
Proudly Made:
in the
WQA Gold Seal /
ANSI NSF 61 Approved
U.S.A.
4 Log (99.99%) Bacteria, Cryptosporidium and Virus Reduction at
>186,000uws/cm2 (186mJ/cm2) UV Dose
• Amalgam High Output UV Lamps • 12,000 Hour Lamp Life
• UV Chamber Overheat Control
• UV Sight Port
• Flange or Threaded Inlet / • Internal Water Flow Diverter
Outlet Connections
• Internal Multi-Level Quartz Sleeve Stabilizer
• Internal Multi-Level Flow Balance System
• Nema 4 Type Electrical Box Enclosure
• Removable UV Lamp / • Fused Circuits
Quartz Sleeve Service Rack
• Power ON/OFF Switch
• UV Intensity Monitor with • Drain
NIST Traceable Calibrated UV Sensor
• Remote PLC Monitoring Connection
• Multi-Level UV Monitoring and Alarms
ATS MODEL
ATS-186K-10
ATS-186K-20
ATS-186K-40
ATS-186K-60
ATS-186K-80
ATS-186K-120
ATS-186K-240
ATS-186K-480
UV DOSE
STANDARD
FLOW GPM KW @ 120V AMPS @ 120V INLET/OUTLET
PIPE SIZE MNPT
>186,000uws/cm2 (186mJ/cm2)
10
0.36
3.0
1”
47.5” X 8.5” X 8.5”
>186,000uws/cm2 (186mJ/cm2)
20
0.72
6.0
1”
47.5” X 11.5” X 11.5”
>186,000uws/cm2 (186mJ/cm2)
40
0.84
7.0
1 1/2”
47.5” X 12.5” X 12.5”
>186,000uws/cm2 (186mJ/cm2)
60
0.96
8.0
2”
47.5” X 14.5” X 14.5”
>186,000uws/cm2 (186mJ/cm2)
80
1.2
10.0
2”
47.5” X 14.5” X 14.5”
>186,000uws/cm2 (186mJ/cm2)
120
1.44
12.0
3”
47.5” X 16.5” X 16.5”
>186,000uws/cm2 (186mJ/cm2)
240
2.16
18.0
4”
47.5” X 22.5” X 22.5”
>186,000uws/cm2 (186mJ/cm2)
480
2.64
22.0
4”
47.5” X 30.5” X 30.5”
ATS -STAND
Control Box Mounting Stand (powder coated)
ATS -THERM
Adjustable Setting Thermistor Overheat Safety Control
ATS - SP
1/4” Sample Port on Inlet/Outlet Riser
ATS - 304NCB
304 SS #4 Brushed Finish on Nema 4 Type Control Box
ATS - LT
UV Light Traps on Inlet/Outlet
ATS - STC
Sanitary-Tri-Clamp Fittings
ATS - MW
Manual Quartz Slaave Wiper
ATS - 316 SS
316 Stainless Steel Wetted Parts
UV CHAMBER
DIMENSIONS
HxWxD”
ESTIMATED
SHIPPING
WEIGHT
65 lbs
85 lbs
75 lbs
95 lbs.
165 lbs.
185 lbs
195 lbs.
225 lbs.
220V Specs are available upon request. ATS-186K UV Models provide a minimum of 186mJ/cm2 UV Dose within the UVT range
and maximum design flow rate. Contact ATS for application design and UV sizing criteria.
The ATS-186K UV System has been Tested and Validated per UVDGM by an
Independent 3rd Party Organization
Flow & UV System Dose for 4Log Reduction of Bacteria, Virus, Cysts and Adenovirus per
USEPA UV Disinfection Guideline Manual (EPA 815-R-06-007)
The ATS-186K UV System has been evaluated, performance tested, and verified by and Independent
3rd Party Organization at the USEPA Test and Evaluation Facility i Cincinnati, Ohio.
Aqua Treatment Service, Inc
194 Hempt Rd,
Mechanicsburg, PA 17050
800 . 224 . 7476 fax: 800 . 787 . 0197
www.aquat.com