ESCO NEMISYS
™
MINING LIP SYSTEM
MORE PRODUCTIVE. SAFER.
LESS MAINTENANCE.
ESCO products are trusted at mines worldwide for productivity and safety. ESCO’s new
Nemisys™ Lip System is engineered to deliver these same benefits. A lighter weight
lip better sized to today’s machines and a streamlined profile optimizes production and
machine working cycles. The new hammerless tooth and shroud system helps reduce
maintenance costs through improved reliability, faster and safer replacement, and
improved lip coverage.
NEMISYS™ LIP SYSTEM
Want to know more?
ESCO
TRUSTED AT SAFE AND
PRODUCTIVE MINES
WORLDWIDE
The benefits of upgrading to
NEMISYS™ SYSTEMS
Slim nose profile
“Nemisys™ teeth are getting much better wear metal
utilization compared to the previous system, which
means longer wear life and less throw-away metal.”
•
ESCO Product Manager
–
Teeth have up to 19% more useable wear metal for more uptime
Improved Productivity
–
Slim lip design and matching tooth
system require 10% less force to penetrate on average
–
Lips weigh 7% less on average to
enable additional carrying capacity
Lock integrated into
point
All new point
shapes
Dual locks
•
Safer Field Replacement
– Entire system features hammerless locking
– Cast-in lifting eyes simplify handling
•
Increased Reliability
–
Intermediate adapters feature dual locking mechanisms for less movement
Inside view
– Teeth maintain strength throughout the wear cycle
•
Reduced Maintenance Costs
–
Greater time between major lip rebuilds due to an average of 12% reduction in peak stresses in the lip
–
Shrouds direct material flow away from adapter horns for longer maintenance cycles
–
Adapters and points use the same locking device and do not require special removal tools
Side view
– Locking devices are integral to both teeth and intermediate adapters
All claims concerning results and performance are based on field testing, laboratory testing or customer feedback and do not constitute a guarantee
or warranty of any kind. The effects of installation procedures, operating conditions, material conditions, wear and tear, and maintenance can affect
performance and are factors outside the control of ESCO.
NEMISYS™ SHROUD SYSTEM
NEMISYS™ TOOTH SYSTEM
Shroud and adapter sides are contoured to protect the lip and adapter horn from
excessive wear. The Nemisys shrouds and adapters cover up to 77% more area on
the frontal lip edge than EverSharp® providing greater protection to the lip.
The Nemisys system offers a variety of point shapes to match digging conditions.
Rock Point
“R”
Standard Wear
Cap Point
“SW”
Standard Point
“S”
Greater protection of
critical front edge
Dragline Point
“D”
Less protection of
critical front edge
Twin Pick
“V”
APPLICATION GUIDE
The Nemisys system is available in four sizes to better match machine break out force.
Nemisys Lip System
Eversharp Lip System
Tooth size
Nemisys
Posilok
(for reference)
Machine
Hitachi
Komatsu
Bucyrus/CAT
Liebherr
N1
S110/92K
EX3600-6
PC4000
RH170B/6040
R9350-R994B
N3
S130/112K
EX5500-6
PC5500
RH200/6050
R9400
N5
S130/122K
RH340B/6060
R995
N7
S145/122K
RH400/6090
R9800/R996B
EX8000-6
PC8000
NAMING CONVENTION
The Nemisys part marking identification (PMID) has been simplified.
HINGE PIN
Hammerless
Shroud Locking Device
Part
S-Series Posilok® PMID
New Nemisys PMID
S110 N1
Heavy Duty Adapter
S110H92K N1H
Wear Cap Adapter
S110W92K
N1W
Point Shape (Rock)
92KRML
N1R
Nose Size
www.escocorp.com
P3025MIN01L0912
© 2012 ESCO Corporation. All Rights Reserved.
All other brand or product names are trademarks of their respective holders.