valco
baby
FOUR/SIX
SIDED
PLAY YARD
PRODUCT REFERENCE GUIDE
Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Important: Please read the following instructions carefully before assembling this product. Retain this
guide in a safe place for future reference.
Due to our policy of continuous
product development, this
product is constantly evolving. It
is possible that some features or
procedures outlined here have
changed since this document
was written. If you are unsure
of any procedure shown here,
please contact us via the web
at [email protected] to obtain
the most up to date information
before use. Include the batch
number, which can be found on
a sticker on the frame.
All pictures and diagrams herein
are provided for illustration
purposes only. Actual product,
colour or fabric may vary.
Valco Baby reserves the right to
modify or alter any specification
or colour without notice or
obligation to modify any product
previously purchased
FURTHER INFORMATION
In Australia/New Zealand
In North America only
www.valco.com.au
www.valcobaby.com
1800 610 7850
© Copyright VE 2009
Play yard ASSEMBLY/OPENING
A
FIGURE A
1. Remove the panels from the carton. Unfold each
pair of sides of the play yard and arrange as a
hexagon or square.
2a
2c
2b
B
FIGURE B
2. Slide the open tube ends (2a) in the panel frame
over the tube end with the push button (2b). Press
the button to allow the tube to insert until it engages
into the corresponding (2c).
IMPORTANT WARNING: ALWAYS TEST THAT ALL PANELS ARE
SECURELY ENGAGED BEFORE USE.
3
C
FIGURE C
4
3. Cover all gaps by placing the fabric around the top
and bottom of the frame, securing with the Velcro
4. Carefully zip up the zippers.
5. Secure the back sides of the zipper flap closed with
the Velcro.
5
3
D
FIGURE D - OPTIONAL PLAY MAT
(May be included with some models)
6. Lay the play mat out flat on the floor, coloured side
up.
7. Velcro the plastic clasps to the base mat and fold
the corner flaps into the center of the play mat.
E
FIGURE E
8. Align each corner of the play yard with a corner of
the play mat and lower into position.
FIGURE F
F
G
10
9. Push the plastic clasps over the frame to secure the
mat.
FIGURE G
10. Place the fabric triangle over each corner of the
play yard. Make sure that the plastic corners are
completely covered.
WARNING
IMPORTANT SAFETY WARNINGS TO HELP PREVENT INJURIES
• Before assembling this Play yard, read and understand the instructions. Incorrect assembly
may make the play yard unsafe. (Keep the instructions safe for future reference.)
• Ensure that the child is unable to climb out of the play yard. To prevent falls or play yard
collapse discontinue use of the folding cot before the child can climb.
• the optional play mat is specifically desgined to fit your play yard (180cm hexagon shape or
100cm square).
• Do not use this play yard if any part is broken, torn or missing.
• Only use accessories that are recommended by the manufacturer.
• Before each use make sure that the Play yard is correctly assembled and that the locking
devices are fully engaged
Remember, your child’s safety is your responsibility...
valco
baby
In Australia/New Zealand
In North America only
www.valco.com.au
www.valcobaby.com
1 800 610 7850