valid until 30. September 2012
Art.-No. 8/6099 - Digital Caliper
reading 0,01 mm / 0,0005", stainless steel, hardened and ground,
4 way measuring
Order.-No.
8/6099150
Range
150 mm
€/Pcs.
16,00
Art.-No. 8/6010 - Solar Digital Caliper
Acc. to DIN 862, reading 0,01 mm/0,0005“, Power is supplied by brightness
over 200 LUX from solar cell, is not at sufficient brightness to Battery supply
converted.
Order.-No.
8/6010150
Range
150 mm
€/Pcs.
32,00
Art.-No. 8/6018 - Digital Caliper
with metal casing
reading 0,01 mm/0,0005“, acc. 0,02 mm/0,0015“,
stainless steel, hardened and ground, 4-way measuring, with points
Order.-No.
8/6018075
Range
75 mm
€/Pcs.
16,00
Art.-No. 8/6028 -Digital Vernier Caliper,
TiN coated, DIN 862
made of stainless steel, hardened usable to 4-way measurement, with metal
case, with button on/off, mm/inch and zero display 12 mm, reading 0,01
mm or 0,0005”, in case
Order.-No.
8/6028150
Art.-No. 8/615 - Vernier caliper made of brass
non magnetic, range 150 mm, length of jaws: 40 mm
with set screw, in pocket
Order.-No.
8/6150150
Range
0 - 150 mm
€/Pcs.
71,00
Range
150 mm
€/Pcs.
38,00
Art.-No. 8/278 - Digital protractor
joiners adjustable level, 0 - 180°, 0,1°, direct reading 0 - 180,
rule 30 x 1,5 mm, reading mm/cm
Order.-No.
8/2780200
8/2780300
Range
200 mm
300 mm
€/Pcs..
28,00
32,00
Art.-No. 8/745 - Precision Vernier Caliper
stainless steel with two metric vernier scales for inside and outside
measurements, reading 1/10 - 1/20 mm
Order.-No.
8/7450300
Range
40 - 300 mm
€/Pcs.
82,00
Art.-No. 8/6027 - Digital Caliper with large-sized measuring faces
and "HOLD"-function,
made of stainless steel, hardened,
with on/off, zero and mm/inch-button,
display 12 mm, reading 0,01 mm or 0,0005",
data output RS232C (RB2),
in case
Order.-No.
8/6027150
2
Range
150 mm
€/Pcs.
100,00
Joiner´s Squares
with beechwood leg
Art.-No. 8/281-1 not graduated
Art.-No. 8/281
Order.-No.
8/2810400
8/2810500
8/2810600
8/2810750
8/2811400
8/2811500
8/2811600
8/2811750
Art.-No. 8/451 - Flexible Steel Rule
Order.-No.
8/4510300
8/4510400
8/4510500
8/4511000
stainless steel, powder coated, mm-Graduation
graduated
Range
400 mm
500 mm
600 mm
750 mm
400 mm
500 mm
600 mm
700 mm
€/Pcs..
6,50
7,50
8,00
9,80
8,50
9,50
10,50
13,00
Measurements
€/Pcs..
300 x 28 x 0,8 mm 2,50
400 x 28 x 0,8 mm 3,00
500 x 28 x 0,8 mm 3,50
1000 x 28 x 0,8 mm 7,60
Art.-No. 8/563 - LED Lamp with magnetic base- LED-Lamp
-
direction adjustable
magnetic base
Total height 150 mm
Base Ø 28 x 32 mm
M4
Magnetforce 30 kg
Order.-No.
8/5630150
€/Pcs.
20,00
3
Art.-No. 8/510
Precision magnifier
without scale, lense tempered, casing made of polyamid
Order-No.
8/5101000
8/5102000
Size H x O
29 x 43 mm
22 x 29 mm
Magnification Visual range €/Pcs.
10x
33 mm
16,00
20x
19 mm
18,00
Art.-No. 8/510-3
Precision magnifier
with scale, lense tempered, casing made of
polyamid, reading 0,1 mm
Order-No.
8/5103000
Size H x O
29 x 29 mm
Magnification Visual range €/Pcs.
20x
19 mm
34,00
Art.-No. 8/510-4 - Precision pen microscope
with scale 122 + 12 mm, lense tempered, casing made of aluminium/polyamid, with clip
A
Order-No.
8/5104025
8/5104050
8/5104100
Size
122 x 12 mm
122 x 12 mm
122 x 12 mm
Magnification
25 x
50 x
100 x
Sight
4,0 mm
2,0 mm
1,2 mm
B
Range
3,0 mm
2,0 mm
1,0 mm
C
Reading
0,05 mm
0,02 mm
0,01 mm
Scale
A
B
C
€/Pcs.
26,00
32,00
46,00
Art.-No. 8/510-5 - Precision tube microscope
with scale and LED-light, shiftable, lense tempered, with focus, casing made of polyamid, with bag
D
E
F
G
Delivery without battery
(2 AA 1,5 V LR 6)
Order-No.
8/5105040
8/5105041
8/5105100
8/5105200
4
Size
Magnification
Sight
50 x 23 x 138 mm
40 x
4,4 mm
50 x 23 x 138 mm
40 x
4,4 mm
50 x 23 x 138 mm
100 x
1,9 mm
50 x 23 x 138 mm
200 x
1,1 mm
Range
4,0 mm
4,0 mm
1,6 mm
1,0 mm
Reading
0,05 mm
0,02 mm
0,01 mm
0,005 mm
Angel°
–
180° x 1°
–
–
Scale
D
E
F
G
€/Pcs.
32,00
36,00
53,00
86,00
Art.-No. 8/510-6 - Stereo-zoom-mikroscope
lense tempered, high quality optic, eyepiece 10x, zoom 1 x – 4 x, stand with fine
adjustment, power supply 230 V / 50 Hz, work distance 80 mm, light 12 V, 10 W
Order-No.
8/5106000
€/Pcs.
350,00
Art.-No. 8/503 Precision magnifier
with scale, 51 x 30 mm
lens tempered, casing made of metal
Scala 0,2 mm
in glass
Order.-No.
8/5030010
8/5030002
Size H x O
51 x 30 mm
51 x 30 mm
Magnification
10x
10x
Sight
25 mm
25 mm
Reading
1,0
0,2
€/Pcs.
13,50
17,00
Art.-No. 8/510-4 - Precision pen microscope
with scale 122 + 12 mm, lense tempered, casing made of aluminium/polyamid, with clip
Order.-No.
8/5104925
8/5104950
8/5104910
Size H x O
122 x 12 mm
122 x 12 mm
122 x 12 mm
Magnification
25x
25x
100x
Sight
4,0 mm
2,0 mm
1,2 mm
€/Pcs.
19,50
25,00
44,00
Art.-No. 8/510-5 - Precision tube microscope
with scale and LED-light, shiftable, lense tempered, with focus,
casing made of polyamid, with bag
Order.-No.
8/5105940
8/5105910
8/5105920
Size H x O
Magnification
50 x 23 x 138 mm
40 x
50 x 23 x 138 mm
100 x
50 x 23 x 138 mm
200 x
Sight
2,0 mm
4,4 mm
1,0 mm
Range
4,0
2,0
1,0
€/Pcs.
23,00
48,50
91,00
5
Divider
with rivet joint, made of forged steel, with edged legs and hardened points
Art.-No. 8/001-1
without wing
Art.-No. 8/002-1
with wing
Art.-No. 8/006-1
with wing + pencil holder
Length Order.-No. 8/001-1Order.-No. 8/002-1
Order.-No. 8/006-1
in mm
without wing
with wing
with wing + pencil holder
150
3,30
4,40
6,60
200
3,60
5,50
8,80
250
5,10
7,70
13,20
300
6,60
10,20
15,40
400
13,20
15,40
–
500
17,60
19,80
–
600
25,30
27,50
–
Length Order.-No. 8/003-1 Order.-No. 8/004-1
in mm
Inside caliper
Outside caliper
150
2,80
2,80
200
3,90
3,90
250
4,70
4,70
300
5,80
5,80
400
14,90
14,90
500
17,10
17,10
Inside-/Outside Caliper
with rivet joint, polished
Art.-No. 8/003-1
Inside caliper
Art.-No. 8/004-1
Outside caliper
Engineer’s Scriber
straight, with knurled handle
-interchangeable-
Best.-No.
8/0300175
€/Stck.
0,80
Art.-No. 8/0300175
Engineer’s Scriber
double ended, with knurled black handle
-interchangeable-
Best.-No.
8/0330250
€/Stck.
0,95
Art.-No. 8/0330250
Magnet
HM-Engineer`s Scriber
Best.-No.
8/0370000
€/Stck.
2,50
knurled body with clip
interchangeable hard metal point
with magnet on the end for
retriving short steel parts
Art.-No. 8/0370000
6
Art.-No. 8/8430 - Thread indicator „Filetor“
for the direct reading of all details
neccessary for the determination of threads and core-O,
dust-proof
plastik case 30 x 60 x 110 mm
Order.-No.
8/8430000
€/Pcs.
50,00
Art.-No. 8/8431 - Tolerance indicator „Tolerator“
for all direct reading of all tolerance values acc. to ISO-recommendation R 286 1962, including complete table of all ISO-tolerances up to nominal dimension
500 mm = more than 6400 pairs od tol.-values, dust-proof plastic-case
Order.-No.
8/8431000
€/Pcs.
50,00
Art.-No. 8/8432 - Tolerance „Convertor“
for direct teading of inch to millimeter
Order.-No.
8/8432000
€/Pcs.
50,00
7
Steel Square „TREND“
Measurements Order.-No. 8/130
in mm
flat
100 x 70
2,75
150 x 100
3,10
200 x 130
3,60
250 x 160
4,10
300 x 180
4,70
400 x 230
5,90
500 x 280
7,50
600 x 330
9,30
750 x 375
10,90
1000 x 500
14,90
workshop quality, zinc plated
Art.-No. 8/130
flat
Art.-No. 8/131
with back
Art.-No. 8/630001 - Precision dial indicator
shock and splash waterproof, reading 0,01 mm,
outerring 58 mm, in plastic case
Order-No.
8/6300010
Range
10 mm
Magnetic Dial Gauge Stand
with fine adjustment, with ON/OFF switch, vertical rod: Ø 12 mm - Length 180 mm
horizontal rod: Ø 10 mm, Length 150 mm
magnetic base: 65 x 50 x 55 mm
in wooden box
Art.-No. 8/5660200
Order.-No.
8/5660200
€/Pcs.
16,00
Preisänderungen und Satzfehler vorbehalten !
€/Pcs.
12,00
Order.-No. 8/131
with back
3,75
4,65
5,90
7,50
9,20
10,90
15,40
20,50
24,90
33,00