STMSS00307 R Nov 2013 Storage Tank Spec_Layout 1 11/16/13 4:06 PM Page 1
C O MME RC IA L
STORAGE TANKS
STANDARD JACKETED STORAGE TANKS
State Commercial Storage Tanks
• Ideal for increasing storage capacity when used along with water heaters and
domestic hot water heating boilers.
Storage Tanks meet R12.5 minimum thermal insulation
requirements of the U.S. Department of Energy and current
edition of ASHRAE/IESNA 90.1
Foam Insulation
• Thick foam insulation reduces standby heat loss and saves energy.
Glasslined Tank
• Alkaline borosilicate composition is permanently fused to steel by firing at a
temperature of 1600°F, and will provide years of corrosion protection and
dependable use at water storage temperatures up to 180°F.
Heavy-Gauge Steel Jacket
• With baked enamel finish.
Threaded Openings
• All tanks furnished with threaded openings for thermometer, relief valve,
2˝ recirculation lines, tankstat, and drain valve.
Anode Rod
• To provide additional corrosion protection and extra years of service, all 80 and
120-gallon models are equipped with an anode rod. Model PVG 0200 OVSA125
has two anode rods.
Installation
• Sized to fit space restrictive installations, all 80 and 120-gallon models fit through 30˝
doorways. Model PVG 0200 OVSA125 fits through a 33˝ doorway.
5-Year Limited Tank Warranty
(FOR SELECT MODELS)
Suggested Specifications
Storage tank shall be a State glasslined storage tank. Tank shall be _______˝ x _______˝ and have a nominal capacity of _______ gallons.
Tank(s) shall have threaded openings as shown on drawings. Interior of tank(s) shall be glasslined with an alkaline borosilicate composition
which has been fused to the steel by firing at a temperature of 1600˚F. Glass coating shall be continuous over the entire inner surface of
the tank. Outer jacket shall have a baked enamel finish. Foam insulation to meet R12.5 minimum thermal insulation requirements of the
Department of Energy and current edition of ASHRAE/IESNA 90.1. Cathodic protection shall be provided. Tank shall have a working pressure
of ______ psi.
For more information on Storage Tanks contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
STMSS00307
Revised November 2013
©2013 State Industries, Inc.
STMSS00307 R Nov 2013 Storage Tank Spec_Layout 1 11/16/13 4:06 PM Page 2
C O MME RC IA L
STANDARD JACKETED STORAGE TANKS
NOMINAL GALLON
CAPACITY
APPROXIMATE
SHIPPING WEIGHT
REFER TO
FIGURE
PVG 0080 O0VT - Jacketed Vertical Only
80
No
STANDARD
WORKING PRESSURE
160
236
1
PVG 0120 O0VT - Jacketed Vertical Only
119
No
160
320
3
PVG 0080 O0VTA125
80
Yes
160
369
2
PVG 0120 O0VTA125
120
Yes
160
411
4
PVG 0200 O0VSA125
175
Yes
160
560
5
MODEL NUMBER
ASME
2" NPT
2" NPT
3/4" NPT
(ANODE)
3/4" NPT
(ANODE)
Figure 1
1" NPT
Figure 2
Figure 3
2" NPT
25 1/4"
26 1/2"
1" NPT
FRONT
2" NPT
FRONT & REAR
63"
54 7/8"
3/4" NPT
FRONT
42 3/4"
2" NPT
FRONT & REAR
54 1/4"
2" NPT
FRONT
42 1/4"
3/4" NPT
FRONT
19 1/2"
11" 9 3/4"
7"
3 3/4"
62"
3/4" NPT
REAR
32 1/4"
16"
2" NPT
FRONT
ASME PLATE
UNDER COVER
3/4" NPT
REAR
47"
29 3/8"
2" ASME INSPECTION
OPENING (PLUGGED)
2" NPT
FRONT & REAR
51 7/8"
3/4" NPT
(ANODE)
3/4" NPT
REAR
3/4" NPT
REAR
15"
2" NPT
FRONT & REAR
11"
4 1/8"
2" ASME INSPECTION
OPENING (PLUGGED)
3 1/2"
2" NPT
FRONT & REAR
3/4" NPT
FRONT
2" NPT
3/4" NPT
(ANODES)
1-1/4" NPT
(ANODE)
1" NPT
Figure 5
Figure 4
2" ASME INSPECTION
OPENING (PLUGGED)
28"
2" NPT
32 "
1" NPT
1" NPT
2" ASME INSPECTION
OPENING (PLUGGED)
ASME PLATE
LOCATED UNDER
COVER
3/4" NPT
2" NPT FRONT
61 3/4"
3/4" NPT
50 1/2"
44 1/2"
21 1/4"
9 3/4"
2" NPT
77 "
2" NPT FRONT
& REAR
17 3/4"
10 3/4"
64"
ASME RATING PLATE AND
HAND HOLE LOCATED
UNDER COVER
17 1/4"
12 1/4"
17 1/4"
12 1/4"
2" ASME INSPECTION
OPENING (PLUGGED)
For complete information on limited warranties, consult written warranty or contact technical support at 1-877-737-2840.
State Industries, Inc., reserves the right to make product changes or improvements without prior notice.
For more information on Storage Tanks contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
1-877-737-2840 Toll-free USA
www.statewaterheaters.com
STMSS00307
Revised November 2013
© 2013 State Industries, Inc.
Printed in U.S.A