NO. OF PAGES: 10 (Including this sheet)
August 10, 2015
FIRST 3IPET TOP 100 ENVIRONMENTAL PROTECTION
TECHNOLOGIES CONTEST
CALL FOR SUBMISSION OF APPROPRIATE AND APPLICABLE
ENVIRONMENTALLY SOUND TECHNOLOGIES (ESTs) FOR AIR,
WATER AND SOIL (INCLUDING SOLID WASTE) POLLUTION
PREVENTION AND CONTROL
INTRODUCTION
As part of efforts to protect the environment and address the challenges of air, water and
soil pollution through appropriate prevention and control strategies, the Foreign Economic Cooperation Office (FECO), with the support of the Ministry of Environmental Protection (MEP) of China, established the Integrated, Intelligent, and International Platform for
Environmental Technology (3iPET). 3iPET aims at taking advantages of the technologies
and cooperation network of governments, companies, and private organizations in China
and other countries to provide both online and offline services to showcase and promote
Chinese and foreign environmental technologies to solve the environmental problems
locally and globally.
The developers/suppliers of proven environmental protection technologies are hereby
invited to participate in the First 3iPET Top 100 Environmental Protection Technologies
Contest, which will commence from August to October 2015. The Contest will identify
and select 100 best (most effective and efficient) technologies worldwide each in the
areas of air, water and soil (including solid waste) pollution prevention and control. A
team comprising of Chinese and foreign experts will be invited to evaluate the selected
technologies in terms of authenticity/validity, innovativeness, cost-effectiveness, operational efficiency, eco-friendliness, integrity and reliability, occupational health and safety,
adaptability and replicability and economic viability. The selected technologies will be
named “Top 100 Technologies for 3iPET” and incorporated into Compendiums (3
volumes) of Top 100 Technologies for Air, Water and Soil (including Solid Waste) Pollution Prevention and Control. In addition, they will be showcased globally on the information and networking platform of 3iPET free of charge. The technologies will also be
demonstrated, promoted and applied within China and internationally through the hubs
and technical service alliance of 3iPET. The platform of the 3iPET will also be used to
promote and facilitate the adoption, adaptation and diffusion of selected proven technologies to other sectors of the local and global economy and hence contribute to the
development of the global Green Economy.
METHOD AND SUBMISSION OF APPLICATION
The submission of applicable technologies for the contest will open from August
10th and lasts till October 30th 2015. Interested technology promoters/developers
and relevant corporate organizations are requested to submit the following documents (better both in English and Chinese):
i) completed “Application Form for 3iPET Top 100 Environmental Technologies Contest”,
Mail address：Room 616, No. 5, Houyingfanghutong, Xicheng District, Beijing,
100035, China
(signed)
Chen Liang
(ii) a technical report on the technology (ies) and,
Director General
(iii)Typical cases/examples of the practical application of the technology(ies) including where possible references/testimonials from the end-users of the technology
(ies) on their experiences.
Foreign Economic Cooperation Office
Ministry of Environmental Protection of China
Three sets of the hard copy of the above documents prepared in MS-Word format
and an electronic copy (one CD, including one compressed file named as “technical
field + technology name + organization name” ) should be sent to the postal
addresses indicated below. The package should be dispatched by courier or
express mail by October 30th 2015. Electronic copy of the documents can be forwarded as advance copy to the e-mail address indicated below before the deadline
for receipt of application.
The relevant documents and guide to submission of application are hereby
attached and can be downloaded from FECO website at http://www.mepfeco.gov.cn/
RESULTS AND OUTCOMES OF TECHNOLOGY ASSESSMENT AND EVALUATION
The entries will be screened by the Technology Evaluation and Assessment Committee to be submitted by MEP/FECO and will consist of reputable Chinese and
international experts in the relevant fields. On completion of the technology assessment and evaluation process the result of the contest will be released on the website of FECO and the WeChat of 3iPET. The top 100 adjudged technologies in each
category will receive awards and recognition from MEP/FECO.
ENQUIRIES AND CORRESPONDENCE
In case of additional information, further clarifications and dispatch of application
documents; enquiries and correspondences should be addressed to the under
listed:
Ms. Gao Lili
Ms. Tang Lu
E-mail: [email protected]
E-mail: [email protected]:
Tel: +86-10-82268776/8877
Fax: +86-10-82200586
Annexes:
1. Information material on 3iPET Top 100 Environmental Protection Technologies
Contest
2. Application Form for 3iPET Top 100 Environmental Protection Technologies Contest
3. Outline of Technical Report
4. Outline of Typical Cases
Annex 1
Annex 2
3iPET Top 100 Environmental Protection Technologies Contest
Application Form for 3iPET Top 100 Environmental Protection
I. Scope of technologies:
1. Air pollution prevention: management of flue gas of industrial boilers and furnaces,
control on power plant boiler flue gas. Monitoring and management of VOCs, control
of automobile emission and fugitive emissions source, key technologies of clean
production, air pollution abatement, control and management for indoor and public
places, etc.;
2. Water pollution prevention: water efficiency and conservation (water saving for
agriculture, industry and urban life, and utilization of unconventional water resources), clean production, sewage treatment (domestic sewage treatment, industrial
wastewater treatment, non-point source management), aquatic ecological recovery
(ecological recovery for water sources, river network, large reservoirs, and wetland)
etc.;
3. Soil pollution prevention and solid waste disposal: recovery and remediation of
industrial pollution sites, polluted farmland, mines, underground water pollution
prevention and control, and recycling, valorization and management of wastes, etc.
II. Participating technologies shall meet the following conditions:
1. In line with environmental and sectoral policies of China;
2. Valid intellectual property right or exclusive technical ownership;
3. Tested and proven process; advanced, affordable and cost-effective technology,
4. Evidence of practical industrial application available, and has been in operation for
over one year;
5. High technical adaptability, can be applied in a large scale;
6. Belongs to mature process, process unit or equipment/material/agent.
7. Safe, reliable, efficient and does not require the use and release of hazardous materials
III. Materials to be submitted
1. Application Form for 3iPET Top 100 Environmental Protection Technologies
Contest (Annex 2);
2. Technical Report on technology(ies) being entered into the contest (See Annex 3
for compiling requirements);
3. Description of Typical Case(s) of the application of the technology(ies) (See Annex
4 for compiling requirements);
4. Project acceptance report, acceptance monitoring report or performance test
(assessment) report issued by a competent third party for typical case(s);
5. Others: business license of legal person, patent certificate, novelty assessment
report, and award-winning certificate of the recommended technologies.
Technologies Contest
Participants in the contest, other stakeholders and the general
public are welcomed to follow the progress of the technology
assessment and evaluation process on the WeChat of 3iPET,
where the results of the contest will be posted and publicized.
QR code of WeChat public
platform of 3iPET
Name of technology:
Appliant1
Legal person2
Tel
Contact
Tel
Fax
E-mail
Mail address
and zip code
Technical field
Air pollution prevention□ water pollution prevention□
Soil pollution prevention and solid waste disposal□
Brief introduction to technical and design principle,
applicable scope, process (e.g. technical source, R&D, and
award, etc.), economic indicator (in 500-1,000 words,
process diagram can be attached)
Brief
Description
Annex 3
Patent name
Patent number
Time
Outline of Technical Report
Patent3
Technical
award
Summary (less than 300 words)
Award name
Award level
Award No.
1. Technical background (less than 1,500 words)
2. Research status of China and/other other countries
3. R&D and experiment
Including technical and design principle, process, major experimental data and
output in R&D, laboratory scale and pilot scale tests, demonstration project, performance test results, and existing problems etc.
（in 200 words）
4. Main economic indicators
Dissemination
Including main parameters, resources, environmental impact index, and economic
indicators (investment and operation costs) etc.
5. Comparison between Chinese technologies and those of other countries
Company
name
Project name
Contact
Tel
6. Key technologies and innovation
7. Application and future outlook
Major users4
We certify that:
The information and application materials provided are true and accurate,
with valid intellectual property right. The company will assume full responsibility for any legal liabilities in case of any IPR dispute.
（seal）
Date:
Instructions for completing the form:
1. The full name of an organization that has the qualification of legal person. The lead
organization should be indicated first if the technology is jointly developed by two or
more organizations.
2. The name of legal person of the lead organization should be indicated if the
technology is jointly developed by two or more organizations.
3. Information about a patent directly related to the technology in application.
4. Information of major users (less than 5).
Annex 4
Outline of Typical Cases of Industrial/Pilot Application of the Technology
1. Case name
2. Overview to project
In less than 200 words. Introduction to the pollution problems to be addressed,,
capacity, construction, adjustment and operation time etc.
3. Description of Process Technology
（1）Process
In less than 100 words. Give a brief introduction to the process and design principle,
work flow, major process indicators, and special functions; process diagram or photo
of facilities can be attached.
（2）Key technological or design features
In less than 200 words. Give a brief description of process technology, innovativeness of the design, specific design considerations for scalability and upgrading;
reliability and maintainability, stability and controllability; hazard and operability
(HAZOP) analysis; occupational safety and health considerations;
4. Technical indicator
In less than 300 words give a brief introduction to the main pollutant, removal rate,
applicable emission standard and information about meeting the standards, annual
reduction volume for main pollutants, production of main by-products, operation and
maintenance parameters of key equipment/facilities (e.g. filling and catalyst), indictor of secondary emission, volume of water-saving and energy-saving, etc.
5. Investment
In less than 200 words provide information on the investment including investment
structure, total investment, investment per unit capacity; cost-effectiveness, financial
profitability and economic viability, return on investment, projected pay-back period.
6. Operation cost
In less than 200 words. Introduction of annual consumption for raw material and
energy consumption, as well as raw material consumption and energy consumption
for unit capacity. Annual operation cost and operation cost for unit treatment capacity. Provide the data to show economic benefits if the project can bring by-products or
prominent water-saving or energy-saving effects. Socio-economic cost-benefit analysis (SECBA).
7. Comment of users
In less than 200 words provide comments and feedback from end-users of the
technology(ies) about features, effects, problems, possible areas of improvement
and suggestions of promotion etc.
8. Contact Details
Please provide details, name, contact, telephone number, address, zip code and
e-mail of contact person for technical information and further inquiry.
(Note: please refer to sample to compile a typical case; please write fewer than two
cases)
Sample of Typi●cal Case of Technology Application
1. Case name
Improved UCT process××××project (××××sewage treatment plant)
2. Overview to project
××××sewage treatment has a daily treatment capacity of×××m3/d. The sewage is
from urban domestic and production sewage and industrial wastewater of ×××××
industrial park. It started construction in ×× (MM) ×× (YY) and was put into operation
in ×× (MM) ×× (YY). The project won××××××××award on ×× (MM) ×× (DD) ×× (YY). The
facility since commissioning in xxx (YY) has been in continuous operation for xxxx
(days or months or years) and has a total downtime of xxx (days, or months or years)
for xxxx (give reasons for shutdown)
3. Introduction to process
（1）Process
The project is about the improved technology for UCT process and can realize the
effects of denitrification and dephosphorization. The process is as follows:
×××××—×××××—improved UCT subsection water inflow biological reaction tank—secondary settling tank—×××××—×××××—water outflow.
The project adopts the subsection water inflow biological denitrification process and
consists of 3 subsections each with anoxic/oxic area connected in series. The
original water flows into the anoxic area by subsection and the sludge returns to the
end of the system. The anoxic area of the first subsection uses the carbon entering
the sewage Q1 to perform denitrification on NOx-N of the sludge. Then the mixed
liquid flows into the oxic area to perform the nitrification process. The mixed sewage
after reaction flows into the anoxic area of the second subsection and uses the
carbon entering the sewage Q2 to perform denitrification. The mixed liquid then
enters the oxic area to perform the nitrification process. Other subsections go like
that.
（2）Key technological or design features
● The process adopts ××××××××××water inflow method and process control to
perform denitrification and dephosphorization, so as to increase the removal rates
for total nitrogen and phosphorous
● Establish×××××, ×××××, ×××××control system, promote the automatic control.
● New technologies such as subsection water inflow×××××, ××××× and ××××× are
applied, thereby stabilizing the water flow.
● Deep denitrification can be realized if an extra carbon source is added.
Fig. X-X improved UCT Technical Process (or photos of facilities)
4. Technical indicator
According to the acceptance report released by ×××，the water outflow of the project
has met the type A class 1 standard of GB18918-2002 Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant. The sewage treatment plant reduces
total nitrogen emission by ×× tons and ×× tons a year, if average water inflow TN is
××mg/L and TP≦××mg/L. By adding extra proper carbon source and coagulant, deep
denitrification and dephosphorization process can be realized (TN≦×mg/L，
NH4+-N≦×mg/L，TP≦×mg/L0. The technology has been proven prominent in
energy saving (per ton power consumption reduced by ×% and save ×× Kwh of power
a year)
5. Investment
The total investment for the project is about ×× yuan, of which, equipment investment
is ××yuan, infrastructure investment ×× yuan, other investment ×× yuan, and investment for per ton water×××× yuan. The life of main equipment is ×× years and the
payback period is ××years.
6. Operation cost
According to the actual operation from ××(MM)××（YY）, the annual sewage
treatment capacity is ×× tons, annual operation cost ××yuan, and operation cost ××
yuan. Use the process to add proper external carbon source and coagulant to realize
a deep treatment. The added carbon source was ×× tons and added coagulant was
×× tons. Thus the annual operation cost will be increased ××yuan and operation cost
for per ton of water will be increased by ×× yuan.
7. Comment by users
The project has brought prominent economic benefits to our company. It is a demonstration project deserving promotion and application. The project has shown excellent technical indicators and met the design requirements for effluent water specifications/standards. It is of great significance to boost ××××××. ×××××× of the technology is expected to be renovated, so as to strengthen×××× and improve ××××.
8. Contact
For more information, further and commercial and technical enquiries please
contact:
Name: ××××××
Title: xxxxxxx
Tel：××××××
Address：××××××
Zip code：××××××
E-mail：××××××