EC4000
Stellar® Service Crane
EC4000
TECHNICAL SPECIFICATION GUIDE
Our People. Our Products.
EC4000
TECHNICAL SPECIFICATION GUIDE
16’ OPTION
20’ OPTION
Crane Rating: Standard Boom Length:
16,000 ft-lb (2.21 tm)
8’ (2.44 m) from CL of Crane
16,000 ft-lb (2.21 tm)
10’ (3.05 m) from CL of Crane
Boom Extension:
• 1st stage: • 2nd stage: Hydraulic 48” (121.9 cm)
Manual 48” (121.9 cm)
Hydraulic 60” (152.4 cm)
Manual 60” (152.4 cm)
Max. Horizontal Reach:
Maximum Vertical Lift:
(from crane base)
16’ (4.88 m) from CL of Crane
17’ 4” (5.28 m)
20’ (6.10 m) from CL of Crane
21’ 3” (6.48 m)
Boom Elevation:
-5 to +80 degree
-5 to +80 degree
Stowed Height:
28.53” (72.47 cm)
29.53” (75 cm)
Mounting Space Required:
19” x 19” (48.3 x 48.3 cm)
19” x 19” (48.3 x 48.3 cm)
Shipping Weight:
970 lbs (440 kg)
1180 lbs (535 kg)
SPECIFICATION INFORMATION Controls:
Radio control standard for all functions
Winch
• Rope Length:
90’ (27.4 m)
• Rope Diameter:
5/16” (.79 cm)
• Line pull speed:
15 ft/min (4.6 m/min)
• Max. single part line:
2000 lbs (905 Kg)
• Max. double part line:
4000 lbs (1815 Kg)
Radio control standard for all functions
Rotation:
410 degree power
(worm gear)
410 degree power
(worm gear)
Lifting Capacities:
4000 lbs @ 4’ (1814 Kg @ 1.22 m)
935 lbs @ 16’ (420 Kg @ 4.88 m)
4000 lbs @ 4’ (1814 Kg @ 1.22 m)
800 lbs @ 20’ (363 Kg @ 6.1 m)
Power Supply Required:
12 volt power unit
2.0 gpm @ 2300 psi
(7.57 lpm @ 159 bars)
12 volt power unit
2.0 gpm @ 2300 psi
(7.57 lpm @ 159 bars)
Min. Rec. Chassis (GVRW)
14,500
90’ (27.4 m)
5/16” (.79 cm)
15 ft/min (4.6 m/min)
2000 lbs (905 Kg)
4000 lbs (1815 Kg)
14,500
DEFINING CHARACTERISTICS
Planetary Drive Winch System
The winch is equipped with a 1.8 HP permanent magnet electric motor with a 315:1 planetary gear reduction system. This ensures
that your winch will never quit lifting before it reaches the full rated capacity.
Double Boom Design
The double boom design makes it nearly twice as strong as the nearest competitor.
Gear Bearing Rotation
Uses same rotation system as the larger class cranes. There are no plastic bushings or brass gears in the rotation system. It uses a
high strength steel ball bearing turntable gear, a high strength steel worm gear, and a cast steel worm gear housing.
Integral Rotation Stop
410 degrees of rotation with an integrated rotation stop. Integrated stops allow you the greatest performance while protecting wires
and hoses from damage.
16’ or 20’ of Reach
Hydraulic 1st stage extension. Manual 2nd stage extension.
Radio Remote
Comes standard with a radio remote control.
NOTE: All Stellar cranes meet ANSI B30.5 and OSHA 1910.180 specifications. Specifications subject to change without notification.
stellarindustries.com
EC4000 CAPACITY CHART (20’ SERIES)
EC4000 CAPACITY CHART (16’ SERIES)
4000#
Reach in Feet/Meters
Capacity in Pounds/Kilograms
3875#
1815 kg
4000#
1810 kg
1415kg
17'4''
1755 kg
Reach in Feet/Meters
Capacity in Pounds/Kilograms
3125#
21'3"
6.48m
5.28 M
1995#
1600#
905 kg
4000#
725 kg
15'
4000#
1815 kg
1810 kg
75º
2.74 M
1540#
1035#
2310#
1450 kg
555 kg
1020 kg
2080#
370 kg
830 kg
1070#
30º
735 kg
735 kg
3'
9'
2.74m
825#
1840#
1385#
15º
1225#
2255#
1.83 M
30º
12'
3.66m
415 kg
3205#
45º
6'
735 kg
1045 kg
920#
645 kg
60º
695 kg
735 kg
45º
1425#
4000#
80º
9'
2820#
15'
4.57m
4000#
1810 kg
520 kg
1810 kg
60º
965 kg
1155#
735 kg
3990#
75º
500 kg
2135#
3.66 M
1880#
1815 kg
80º
1105#
1810 kg
12'
4000#
1815 kg
4000#
735 kg
1205 kg
4000#
1810 kg
1410#
2660#
18'
5.49m
4000#
4.57 M
1815 kg
6'
1.83m
485 kg
1650#
15º
745 kg
3'
.914 m
.914 M
1265#
1970#
0'
3'
6'
1.83 M
.914 M
935#
420 kg
570 kg
890 kg
8'
12'
2.44 M
3.66 M
deducted from the capacity.
16'
9'
2.74m
66
77
GEOMETRIC DIMENSIONS (16’ OPTION)
4
5
6'
1.83m
10'
3.05m
3
15'
4.57m
44
20'
6.10m
33
1
1
GEOMETRIC DIMENSIONS
(20’ OPTION)
2
26.52
26.52
26.52
D
D
0'
360 kg
2000 lbs. (905 kg). For greater
loads, use 2 - part line.
55
2
800#
Maximum 1 - part line capacity is
2000lbs (905kg). For greater loads,
Maximum 1 - part line capacity is
use 2 - part line.
Weight of load handling devices are
THE
THE INFORMATION
INFORMATION CONTAINED
CONTAINED IN
IN THIS
THIS DRAWING
DRAWING ISIS THE
THE SOLE
SOLE PROPERTY
PROPERTY OF
OF
STELLAR
STELLARINDUSTRIES
INDUSTRIESINC.
INC. ANY
ANY REPRODUCTION
REPRODUCTION IN
IN PART
PART OR
OR WHOLE
WHOLE WITHOUT
WITHOUT
4 INDUSTRIES
3
5
THE
PERMISSION
THE WRITTEN
WRITTEN
PERMISSION OF
OF STELLAR
STELLAR
INDUSTRIESINC.
INC. ISIS PROHIBITED.
PROHIBITED.
6
7
3'
.914 m
part of the load lifted and must be
Weight
of load handling devices are
deducted from the capacity.
part of the load lifted and must be
deducted from the capacity.
loads, use 2 - part line.
6
7
0'
4.88 M
88
1065#
480 kg
725 kg
Maximum 1 - part line capacity is
Maximum
1 - partFor
linegreater
capacity
is
2000lbs (905kg).
loads,
2000
(905
kg). For greater
use 2lbs.
- part
line.
Weight of load handling devices are
Weight
of the
loadload
handling
are
part of
lifted devices
and must
be
part
of the load
lifted
must be
deducted
from
theand
capacity.
ONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
C. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
ION OF STELLAR INDUSTRIES INC. IS PROHIBITED.
ONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
C. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
SION OF STELLAR INDUSTRIES INC. IS PROHIBITED.
1600#
0'
26.52
D
D
19.53
19.53
19.53
19.53
134.90
134.90
110.88
100.41
100.41
15.49
15.49
110.88
124.33
124.33
C
C
C
C
CG
28.95
CG
28.95
CG
CG
30.01
30.01
9.69
17.57
17.57
9.69
27.34
27.34
B
9.92
9.92
39.56
39.56
B
10.00
BB
10.00
14.75
14.75
14.75
14.75
P
O
®
10.00
10.00
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
CAD GENERATED DRAWING,
A
ROTATIONAL CLEARANCE
SERVICE BODY MOUNT
Mounts on 20” deep (or larger) side packs.
2
26.5” (67.31 cm)
1
HOLE MOUNTING DETAIL
.
FRONT
10.00
5.00
5.38
Item Part
7.38
14.75
Qty.
Description
1
42985 Cap Scr 0.88-9x1.75 HHGR8ZY 4
2
8648
Your local distributor:
Washer 0.88 SAE GR8
4
®
Our People. Our Products.
190 State Street
P.O. Box 169
Garner, IA 50438
Telephone: (641) 923-3741 • (800) 321-3741
Fax: (641) 923-2812
Internet: www.stellarindustries.com
Email: [email protected]
For the most up to date version of this brochure, please visit www.stellarindustries.com.
An Employee Owned Company.
Copyright © 2016 Stellar Industries, Inc.
STL000072 8/16