Industrial Fast Ethernet
Mini Bridging Converter
1x 10/100Base-TX
1x 100Base-X (SFP Slot)
General
The IP protocol has already left the in-house environment and is going to take all
remaining communication areas. Industrial Ethernet already is an established
idea, describing the reliable use of Ethernet components in harsh environments.
Because of the large number of these applications the market requires simple
and also reliable and cost effective products. With the new Industrial Ethernet
Entry Line MICROSENS fulfils these requirements. The products are very compact
and include:
•
5 port Fast Ethernet Switch
•
Fast Ethernet Bridging Converter
•
Fast Ethernet Bridging Converter with PoE
•
Power over Ethernet Injector
All new devices distinguish themselves with easy handling (Plug & Play) and do
not need extensive configuration. New developments are focusing on increasing
the port numbers and further implementation of Gigabit Ethernet.
Fig. 1: Industrial Fast Ethernet Mini Bridging Converter
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
Industrial Fast Ethernet Mini Bridging Converter
Key Features

True Mini, rugged design enclosure 59x36x49mm (WxDxH)

Supports 18..36VAC/12..60VDC

Supports Link Fault Pass through (LFP) function

Supports switch mode and converter mode

Surge protection diodes on power input

ESD protection on RJ-45 port

Provides Far End Fault function on FX port

Provides increased Noise Immunity

Extended temperature range -40°C to 75°C
Mechanical Dimensions
Page 2/5
Industrial Fast Ethernet Mini Bridging Converter
Page 3/5
Technical specifications
IEEE Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet
IEEE802.3x Flow Control and Back Pressure
Data Processing
Store and Forward
Flow Control:
IEEE 802.3x Flow Control and Back Pressure
Architecture
Full wire speed conversion, Transparent
conversion to 802.1Q VLAN tagged packets
MAC address Table Size
1K
Packet Buffer Size
1Mbit
Network Connector
RJ-45 10/100Base-TX Auto negotiation, Auto
MDI/MDI-X function, Full/Half duplex
Fiber port: SFP 100Base-X
LED indicators
Power, Speed, Link/Act
Speed (TP port)
Link/Act(TP and Fiber port)
DIP Switch
Link Fault Pass Through (LFP)
Converter Mode, Switch Mode
Power protection
Surge protection on power input
Connector protection
Reserve polarity
protection
Overload current
protection
ESD protection on TX port
Power Input
Present
Present
18..36VAC or 9..60VDC, DC Jack terminal cable
supported (DC Barrel Connector)
Power Consumption
Full Load: 1.92Watts at 48VDC
3 pin contact terminal block for power input
Wire range: 0.34mm2 to 2.5mm2
Removable Terminal
Block
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
Operating Temperature
-40℃..75°C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40℃..85°C
Housing Design
IP40 Design, high graded Aluminium
Dimension (W X D X H)
59x36x49mm
Industrial Fast Ethernet Mini Bridging Converter
Page 4/5
Twisted Pair Connections
The integrated auto-crossing function of the Twisted-Pair ports makes the use of
crossed patch cables unnecessary. The converter automatically detects the pin
out of the connected cable and adapts the port accordingly. For all connections
standard 1:1 Twisted Pair cables can be used.
The Autonegotiation mechanism detects automatically the speed and
transmission mode (full or half duplex) between connected ports.
Safety Notes
WARNING: Infrared radiation as used for data transmission within the fiber
optic, although invisible to the human eye, can nevertheless cause damage.
To avoid damage to the eyes:

never look straight into the output of fiber optic components – danger of
blinding!

cover all unused optical connections with caps.

commission the transmission link only after completing all connections.
The active laser components used with this product comply with the provisions of
Laser Class 1.
DANGER: Conductive components of power and telecommunications networks
can carry dangerously high voltage.
To avoid electric shock:

Do not carry out installation or maintenance work during lightning storms.

All electric installations must be carried out in accordance with local
regulations.
Industrial Fast Ethernet Mini Bridging Converter
Page 5/5
Order Information
Art.-No.
Description
Connectors
MS657049X
1x SFP Port
Industrial Fast Ethernet Mini Bridging Converter, 1x
1x RJ-45
10/100Base-TX to 100Base-X SFP Slot, -40..+75°C
1x Power
SFP Pluggable Transceiver Fast Ethernet 1310nm
MS100190DX Multimode LC, extended temperature range
-40..85°C
LC duplex
SFP Pluggable Transceiver Fast Ethernet 1310nm
MS100191DX Single Mode LC, extended temperature range
-40..85°C
LC duplex
Accessories
Art.-No.
Description
Connectors
MS700420
DIN-Rail power supply 24 Watt 24 V / 1.0 A,
wide range input 85-264 VAC
In: 3-pin
Out: 2-pin
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function or design. MICROSENS
does not assume any liability arising out of the application or use of any product. 4515DH