Signal Integrity Measurement Solutions
Bit Error Rate Tester
•
•
•
•
SIGNAL INTEGRITY MEASUREMENT SOLUTION
•
ML4039,ML4039B,ML4039A/ML4009
–4x30Gbps/1x30Gbps BERT
ML4039-JIT/ML4039B-JIT/ML4009-JIT
– BERT with Jitter Generation
ML4039B-EQL/ML4009-EQL
– BERT with 9-Tap Emphasis
ML4009-HV
– BERT with High Amplitude to 4V
ML4039C
–4x30G BERT with NRZ/PAM4 Support
Digital Sampling Oscilloscope
•
Optical Sampling Oscilloscope
Time Domain Analyzers
•
•
•
•
•
ML4004
–3.1-5, 6.2-15 and 18.6-32 Gbps BERT
and50 GHz BW DSO
ML4004-JIT
–With jitter Generation
ML4004-PAM
–2x60 Gbps PAM4 BERT with 50 GHz BW
Scope
ML4004-HV
–With High Amplitude to 4V
ML4003B
–BERT and twin Scope combo
PORTjack
•
ML4025/ML4006
–4x50 GHz/1x50 GHz DSO
Portable Tester Platform & Plug-ins
–ML4004-JIT
– 8x TDR
–400G BERT ML4054-CFP8 with adapters:
CFP8 – OSFP
CFP8 – CFP2-DCO
CFP8 – QSFP-DD
CFP8 - uQSFP
•
•
ML4025C/ML4005C
–4x10GHz/1x10GHz Optical Scope
ML4005D/ML4025D
–25GHz Optical Scope
Module Compliance Board
•
•
•
•
•
•
•
•
•
•
•
•
•
CFP: ML4018
CFP2: ML4043
CFP2-ACO: ML4027-ACO
CFP2-DCO: ML4027-DCO
CFP4: ML4049
CFP8: ML4057
MicroQSFP: ML4044
QSFP28: ML4041-K&ML4021-K
QSFP+: ML4021
QSFP-DD: ML4062-MCB
SFP28: ML4024
OSFP: ML4064-MCB
CXP2: ML4063-MCB
Host Compliance Board
•
•
•
•
•
•
•
•
•
•
•
•
CFP: ML4014
CFP2: ML4028
CFP2-ACO: ML4028-ACO
CFP2-DCO: ML4028-DCO
CFP4: ML4052
CFP8: ML4058
MicroQSFP: ML4045
QSFP28/QSFP+: ML4020 & ML4020-N
QSFP-DD: ML4062-HCB-Tx/Rx
SFP28: ML4023& ML4023-N
OSFP: ML4064-HCB-Tx/Rx
CXP2: ML4063-HCB
Adapter
•
CFP2 to QSFP28: ML4086
400G BERT
•
ML4054/DCO/CFP8/QSFP-DD
Services
•
•
Compliance Test Suite
Compliance Services
page1
cPCI Chassis Based Instruments
4-Lane Digital Sampling Oscilloscopes
ML4025-50
50 GHz Differential 4-LaneDigital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ML4025-32
32GHzDifferential 4-LaneDigital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ML4025C
9.5 GHz Optical /32 GHz Electrical, Differential 4-Lane Sampling Scope, 780-1600nm
ML4025D
25 GHz Optical/50GHz Electrical 4-Lane Digital Sampling Oscilloscope, Jitter decomposition, PAM4 meas.
4-Lane Bit Error Rate Testers
ML4039
8.5- 15 and 21- 30Gbps BERT for production testing, Pre-emphasis, Post-emphasis, Bathtub, Eye Contour, CTLE
ML4039-JIT
8.5- 15 and 21- 30 Gbps BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control
ML4039A-JIT
3.1-5, 6.2-15 and 18.6-32Gbps BERT with Phase and Amplitude Modulation Jitter Generation, Skew Control
ML4039B
1 to 32GbpsBERT continuous bit rate coverage and 4 independent time bases.
ML4039B-JIT
1 to 32 Gbps BERT continuous bit rate coverage and 4 independent time bases with jitter generation
ML4039B-EQL
1 to 32 Gbps BERT with 9-tap equalizer characterization and pre-emphasis with 20dB range
ML4039C
3.1-5, 6.2-15 and 18.6-30 Gbaud BERT. Supports NRZ & PAM4
BERT and Scope combo
ML4003B
1 to 30 Gbps BERT with SFP28 Port, 32GHz DSO & 10GHz Optical Scope
PON tester with 25 GHz O/E ref. receiver and H/W filters for 1.25, 2.5 and 10G. AWG for burst control. SFP28
ML4003BX
and XFP ports. 32 GHz DSO. 1 – 30 Gbps BERT
SIGNAL INTEGRITY MEASUREMENT SOLUTION
Standalone Instruments
1-Lane Bit Error Rate Testers
ML4009
8.5- 15 and 21- 30Gbps BERT for production testing, Pre-emphasis, Post-emphasis, Bathtub, Eye Contour, CTLE
ML4009-JIT
8.5- 15 and 21- 30 Gbps BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control
ML4009-HV
8.5- 15 and 21- 30 Gbps BERT with High voltage output up to 4Vdiff
ML4009-EQL
8.5- 15 and 21- 30 Gbps BERT with 9-tap equalizer characterization and pre-emphasis with 20dB range
Time Domain Analyzers
ML4004
3.1-5, 6.2-15 and 18.6-32Gbps BERT and 50GHz DSO
ML4004-JIT
3.1-5, 6.2-15 and 18.6-32Gbps BERT and 50GHz DSO with jitter generation
ML4004-PAM
2x60Gbps PAM4 BERT with 50GHz BW Scope
ML4004-HV
3.1-5, 6.2-15 and 18.6-32Gbps BERT and 50GHz DSO with high amplitude up to 4V
1-Lane Digital Sampling Oscilloscopes
ML4005C
9GHz (12Gbps)Optical /32GHz Electrical Sampling Scope, 780-1600nm
ML4005D
25GHz Optical /32GHz Electrical Sampling Scope, 780-1600nm
ML4006-50
50GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ML4006-32
32GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ATE Instruments
4-Lane Digital Sampling Oscilloscopes
ML4025-ATE
32GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
4-Lane Bit Error Rate Testers
ML4039-JIT-ATE
30GBERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control
page2
Portable Tester
PORTjack
Portable Tester with Plug-ins: ML4004-JIT, 8x TDR, and 400G BERT ML4054-CFP8 with: CFP8-OSFP, CFP8-CFP2
DCO, CFP8-QSFPDD, and CFP8- uQSFP adapters
Interconnect Test Products
Module
Model #
Description
CFP2
SIGNAL INTEGRITY MEASUREMENT SOLUTION
Breakout Module/
HCB
4x25G Retimed
Loopback Module
10x10G Passive
Loopback Module
10x10G
Passive Host/MCB
10x10G Retimed
Loopback Module
4x32G ACO
Passive Host/MCB
Breakout Module/
HCB
Breakout Module/
HCB
ML4028
ML4029
ML4030-SR10
ML4042
ML4043-SR10
ML4027-ACO
10x10 Gbps with high-density connector rows
4x25-28 Gbps CDR, MSA compliant, PRBS generator and detector, temperature monitor, custom
memory maps, input & DFE adaptation to optimize eye opening
10x10 Gbps. MSA compliant with programmable power dissipation up to 12W, insertion counter,
custom memory maps
10x10 Gbps, current sense, 18 GHz Right Angle SMA connectors. Comes with Windows GUI
10x10-14.5 Gbps, customized memory maps, input & DFE adaptation to optimize eye opening,
insertion counter, wide range CRU
4x32 Gbps, MSA compliant master, current sense with 2.92mm connectors, provide an easy
solution for programming CFP2-ACO
ML4028-ACO
4x32 Gbps, 40GHz with high-density connector rows featuring an insertion loss of 2.4dB at 16GHz
ML2028K-ACO
4x32 Gbps, 40 GHz with K connectors featuring an insertion loss of 1.1 dB at 16 GHz
4x32GPassive
Loopback Module
ML4030-ACO
4x32 Gbps, MSA compliant housing offering heat dissipation up to 12W, programmable to different
power levels
4x25G Passive
Loopback Module
ML4030-LR4
8x25G DCO
Passive Host/MCB
Breakout Module/
HCB
8x25GPassive
Loopback Module
Coherent Modulation
Analyzer
ML4027-DCO
ML4028-DCO
ML4030-DCO
ML4065
4x25 Gbps, MSA compliant housing offering heat dissipation up to 12W, programmable to different
power levels
8x25 Gbps, MSA compliant master, current sense with 2.92mm connectors, provide an easy
solution for programming CFP2-DCO
8x25 Gbps, 40GHz with high-density connector featuring low insertion loss
8x25 Gbps, MSA compliant housing offering heat dissipation up to 24W, programmable to
different power levels
4x50GHz Sampling Scope with Phase and Amplitude measurement for calibrating CFP2 ports line
cards
CFP
Passive Host/MCB
Breakout Module/
HCB
Passive Loopback
Module
Passive Loopback
Module
ML4018
10x10 Gbps, MSA compliant, current sense/limit monitor with insertion loss of 0.65dB at 5.15
GHz. Comes with Windows GUI
ML4014
10x10Gbps, featuring a low insertion loss of 0.625 dB at 5.13 GHz
ML4013
Ml4013-HP
10x10 Gbps, MSA compliant, programmable power dissipation up to 24W, temperature sensing,
customized memory maps
10x10 Gbps, MSA compliant, programmable power dissipation up to 40W, temperature sensing,
customized memory maps
CFP4
Passive Host/MCB
Breakout Module/
HCB
Passive Loopback
Module
ML4049
4x28 Gbps, 40 GHz with 2.92 mm K connectors, MSA compliant with low insertion loss,
ML4052
4x28 Gbps, high-density connector rows with low insertion loss of 0.9 dB at 16 GHz
ML4050
4x28 Gbps, customized memory map, MSA compliant, programmable power dissipation up to
6.5W
page3
CFP8
Passive Host/MCB
ML4057
Breakout Module/
HCB
ML4058
Breakout
Module/HCB
ML4058-N
Passive Loopback
Module
Eye Opener Active
Loopback
ML4059
ML4059-EO
Supports 16x25 Gbps, 8x50G PAM and CFP8-ACO, MSA compliant master, 2x8 40GHz Huber &
Suhner _2x8 Connectors with a low insertion loss 1.4 dB at 16 GHz
MSA compliant, supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO. 1x8 40GHz Huber & Suhner
Connectors with low insertion loss 1.9 dB at 16 GHz
MSA compliant, supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO. 1x8 40GHz Huber & Suhner
Connectors with low insertion loss at 16 GHz: 2.7 dB for the longest path and 1.3 dB for the shortest
path
Supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO, MSA compliant, Superior SI performance
and supports 28 Gbps Analog Coherent, programmable power dissipation up to 21W
Transmit data from the host is passing through the eye opener and is electrically routed,
(internal to the loopback module), to the receive data outputs and back to the host.
QSFP-DD
8x50 Gbps, 49 GHz with 2.92 mm k connectors, current sense/limit monitor with low insertion
loss. Comes with Windows GUI
Passive Host/MCB
ML4062-MCB
Breakout
Module/HCB
Passive Loopback
Module
Eye Opener Active
Loopback
ML4062-HCB-Tx
8x50 Gbps, K connector rows with low insertion loss
ML4062-HCB-Rx
ML4062-R
Supports 8x50 Gbps electrical interface, built with advanced PCB material and programmable
ML4062-S
power dissipation up to 14 W. Comes with ribbed or smooth shell.
Transmit data from the host is passing through the eye opener and is electrically routed,
ML4062-EO
(internal to the loopback module), to the receive data outputs and back to the host.
host board to supply power to the QSFP-DD modules, and an I2C master that allows to
ML4062-CNT
read/write the registers, it comes with a GUI
ML4062-ANA
QSFP-DD I2C and State Machine Host Tester with PS noise monitor
ML4062-BO
8x50 Gbps, 2x8 Huber+Suhner MXP Connector rows with low insertion loss
Controller
Analyzer
Breakout
MicroQSFP
SIGNAL INTEGRITY MEASUREMENT SOLUTION
Passive Host/MCB
Breakout
Module/HCB
Passive Loopback
Module
Analyzer
ML4044
ML4045
ML4046
ML4046-ANA
Supports 4x28 Gbps interfaces.,40 GHz Grooved 2.92 mm K connectors with low insertion loss
0.5 dB at 16 GHz, and high performance signal integrity traces from K connectors to MicroQSFP
host connector
High Performance signal integrity traces and supports 4x28 Gbps TX & RX Lanes, 40 GHz Grooved
2.92 mm K connectors with low insertion loss 1.2 dB at 18 GHZ
Support 4x28 Gbps, I2C slave interface compliant with SFF 8679, programmable power
dissipation up to 5 W and high performance signal integrity traces
MicroQSFP I2C and State Machine Host Tester with PS noise monitor
QSFP28
Passive Host/MCB
ML4041-K
4x28 Gbps, MSA compliant, 40 GHz with K connectors, current sense/limit monitor with low
insertion loss of 0.5 dB at 16 GHz. Comes with Windows GUI
Breakout Module/
HCB
ML4020
4x28 Gbps, high-density connector rows with low insertion loss of 1.5 dB at 16 GHZ
ML4002-28
MSA Compliant, programmable power dissipation up to 3.5 W
ML4012-28-LC
Low cost Loopback Module featuring superior signal integrity
ML4002-28-C5
4x28 Gbps, Insertion Counter, Power dissipation up to 5W, with programmable power ramp up
Passive Host/MCB
ML4021
4x14 Gbps, MSA compliant functionality, current monitoring and a programmable power supply
16 SMA connectors,
Passive Loopback
Module
ML4002
4x14 Gbps, MSA compliant programmable power dissipation
Passive Host/MCB
ML4024
28 Gbps, 40 GHz with 2.92 mm K connectors, current sense/limit monitor with low insertion loss
of 0.5 dB at 16 GHz. Comes with Windows GUI
Breakout Module/
HCB
ML4023
28 Gbps, 4 2.92 mm 40 GHz K connectors with low insertion loss of 1 dB at 16 GHz
Breakout Module/
HCB
ML4023-N
28 Gbps, K connector rows with low insertion loss
Passive Loopback
Module
ML4026-28
MSA Compliant, programmable power dissipation up to 6 W
Passive Loopback
Module
QSFP+
SFP28
page4
OSFP
Passive Host/MCB
ML4064-MCB
8x50 Gbps, 2.92 mm K connectors, current sense/limit monitor with low insertion loss. Comes
with Windows GUI
Breakout Module/
HCB
Passive Loopback
Module
Eye Opener Active
Loopback
Breakout
Analyzer
ML4064-HCB-Tx
ML4064-HCB-Rx
8x50 Gbps, OSFP MSA Compliant, high-density connector rows with low insertion loss
ML4064
ML4064-EO
SIGNAL INTEGRITY MEASUREMENT SOLUTION
ML4064-BO
ML4064-ANA
Supports 8x50 Gbps electrical interface, built with advanced PCB material and programmable
power dissipation up to 16 W.
Transmit data from the host is passing through the eye opener and is electrically routed,
(internal to the loopback module), to the receive data outputs and back to the host.
8x50 Gbps, high-density connector rows.
OSFP I2C and State Machine Host Tester with PS noise monitor
page5
Adapter
ML4086
CFP2 to QSFP28, MSA compliant passive adapter
ML4086-Ret
CFP2 to QSFP28, MSA compliant retimed adapter
ML4086-Fec
CFP2 to QSFP28, MSA compliant retimed with Forward Error Correction adapter
ML4054-QSFP28
Combination of a dual 4-lane BERT with two QSFP28 MCBs, Ultra Compact: Stand Alone. Tests
QSFP28 transceivers and cables, handles data Rates: 3.1–5, 6.2–15 and 18.6 – 30.2 Gbps and airtight and robust shell. Low Cost.
400G BERT
ML4054-CFP8
400G CDAUi-8 & CDAUi-16 BERT. 3 Variants: Portable, EVB or Benchtop. Low cost.
Full-fledged BERT and CFP8 analyzer. 16 x 28G NRZ or 8 x 56G PAM4 Channels
ML4054-DCO
Adapter CFP8 to CFP2-DCO. Supports 8x25G or 8x50G. Ultra Compact: Stand Alone. Low cost.
ML4054-QSFP-DD
Combination of a dual 4-lane BERT with QSFP-DD. Ultra Compact: Stand Alone. Low cost.
ML4054-OSFP
Combination of a dual 8-lane BERT with OSFP. Ultra Compact: Stand Alone. Low cost.
SERVICES
Compliance Test
Suite
SIGNAL INTEGRITY MEASUREMENT SOLUTION
Compliance Services
OIF-CEI3.1
or
CAUI-4
Reduce your DUT testing time from days to less than an hour with the ML automated compliance
test suite. Comes in two flavors: IEEE802.3bm or OIF-CEI3.1
Send us your DUT and we do the compliance tests for you and generate a comprehensive report
Worldwide
North America & Europe
Asia
MultiLaneSAL
Houmal Technology Park
141 Main Road
Houmal, Lebanon
+961 5 941668
MultiLane Inc
2000 Wyatt Drive, Suite 6
Santa Clara CA 95054
USA
+1 408890 2234
MultiLane AsiaInc
No. 18, Prosperity Rd. 2
Hsinchu Science Park, 30078
Taiwan
+88636686667
Website: www.multilaneinc.com
E-mail: [email protected]
page6