The versatile
and affordable
air powered
patient lifting
platform
Safely lift patients of up to 34 stone
(220 kg) for X-Rays and a range of other
moving and handling applications
Safely lift patients for erect weight bearing radiology
examinations of hips, knees, feet and ankles.
Perform chest examinations using the platform as a height
adjustable seat.
Safe
Easy to use variable speed control
ensures that every patient feels safe
when raised and lowered.
Smooth and controlled air powered
movement.
Ergonomic hand rail design enables
optimum patient grip.
In the event of a power failure, the lift
can still be safely lowered.
Portable
Easy to operate spring assisted
transport castors enable effortless
movement between rooms.
Can be manoeuvred by one person
through a standard door width.
Ample ground clearance makes moving
the unit around the hospital or from
ward to ward easy.
Versatile
Open frame allows a 360 degree view
and easy access to the area under
examination.
Large, open, low-profile platform is
suitable for patients with crutches.
Infection Control
Removable polypropylene textured
platform cover can be replaced when
worn or damaged.
Open design enables ease of access
for infection control cleaning.
•
Eliminates the need for patients to use steps.
•
Prevents staff from having to bend,
squat or kneel.
•
Bariatric lifting capability up to 34 stone
( 220 kg ) future-proofs your investment.
•
Lifts safely to a height of 61 cm.
•
No mains electricity cable fitted to the lifting
platform.
Optional Attachments
Half Step
Reduces step height by half for patients
with very limited mobility.
Safety Bar
Can be fitted at the front and back of
the platform.
Specification
Please note: Information based on a standard MD220 Lift with no
attachments and a patient weight of approximately 9 stone (60 kg)
Overall Size
90 cm Long x 60 cm Wide x 104 cm
Tall (118.5cm Long with Transport
Castors fitted and in use)
Available Platform Size
77 cm Long x 55 cm Wide
(89 cm through frame with crutches)
Platform/Step Height
12 cm
Maximum Lift Height
61 cm
Lift Speed
Approx 17 seconds to raise to 500mm
from fully lowered
Speed Control
Variable control of lift and lower
speed as standard
Safe Working Load
34 stone (220 kg)
Weight of MD220 Lift
110 kg
Power Supply
Low pressure air / mains powered
air pump as standard
Mains Powered Pump
240v AC
Portability
Transport Castors supplied as
standard
Infection Control
Open access design to enable ease
of cleaning
Removable polypropylene textured
platform cover that can be replaced
when worn or damaged
Optional Attachments
Battery Powered Low Pressure Air
Pump
Half Step
Ramp
Safety Bar
Personal Care Tray for treatment /
wet environments
Seat Cushion
Wheelchair Platform
Plate to enable wheelchair users to
be lifted
For more information, or to arrange
a demonstration of the MD220 Lift
please contact;
W.S. Rothband & Co Ltd
4-6
Knowsley Rd
Haslingden
Lancs
BB4 4RX
T: 01706 830086/210297
F: 01706 830324
www.rothband.com
[email protected]
Copyright © Mobility with Dignity 2014. All rights reserved. Mobility with Dignity®
is a registered trademark and trading name of Engineered Assistance Ltd The
MD220 Lift has been designed, manufactured and inspected by Mobility with
Dignity in accordance with European Directive 93/42/EEC and meets the Essential
Requirements (ER’s) in Annex I of the Directive which apply to it. Issue 02 –
September 2014. E & O.E. Information correct at the time of printing. Images are
for illustrative purposes and may not match fi nal product specifi cations. Mobility
with Dignity reserves the right to change product specifi cations and availability
without notice.