24” Marvel Built-In
Single Tap Beer Dispenser
33 3/4" H
Performance
• Dynamic Cooling Technology™ delivers the industry’s best temperature
stability and rapid cool down, tested and proven
to cool nearly 2x faster than competitors
25 5/8" D
including
handle
• Integrated drain system keeps spillage under control and removable
components make for easier cleaning
• Double-insulated tower reduces foam on pour
and prevents condensation
• Now even quieter operation thanks to exclusive design enhancements
to buffer and minimize sound
Storage Capabilities
• The only beer dispenser that can store half kegs, tall quarter kegs, pony
kegs, sixth barrels, Cornelius kegs, growlers,
bottles or cans
• Lo-Boy coupler makes it easier to store, tap and swap out
tall U.S. type D half barrels
• (2) stow-on-board, commercial-grade stainless-steel shelves convert unit
to a full refrigerator to store perishables
• Secure CO2 tank storage area and drain basin
• Rear port gives external CO2 tank option
• Anti-scuff interior floor shield protects against cabinet wear
and tear from loading and unloading kegs
• 5.7 cu. ft. capacity
Touchscreen Controls
• Multifunction Marvel Intuit™ Integrated Controls allow you to select a
precise cabinet temperature from 34° F to 46° F
• Vacation mode conserves energy during times when unit
is not in use
Aesthetics
• Finish: stainless steel
• Black toe kick adjustable to 4” with leveling legs
Additional Convenience
• Close Door Assist System™ gently and automatically draws door to a
close, ensuring door is never accidentally left ajar
• 1-year parts and labor warranty, 5-year sealed system
parts warranty
marvelrefrigeration.com
|
800.223.3900
23 7/8" W
PRODUCT
(61 cm)DIMENSIONS
(60.7 cm)
(86.4 toML24BN
88.9 cm)
(58.1 cm)
ML24BN(P)
(61 cm)
(87 to 89.5 cm)
ML24BN(P)
115V/60Hz/15A
MODEL
MODEL
ML24BN(S)
ML24BN(S)
ML24BSS2RS
ML24BN(P)
ML24BN(P)
PRODUCT DATA
DOOR
STYLEOPENING DIMENSIONS
ROUGH-IN
ELECTRICAL
PRODUCT
(S)"A"
Solid Door
REQUIREMENTS#
WEIGHT
"B"
"C"
(P)24"
Solid Overlay
Door
(no
handle)
140 lbs24"
**34"
to
35"
115V/60Hz/15A
(61 cm)
(86.4 to 88.9 cm)(63.6 kg)
(61 cm)
1
1
140 lbs*24"
24"
**34
⁄
4" to 35 ⁄4"
115V/60Hz/15A
(61 cm)
(87 to 89.5 cm) (63.6 kg)
(61 cm)
DOOR STYLE
PRODUCT DATA
(S) Solid Door
ELECTRICAL
PRODUCT
(P) Solid Overlay Door (no"A"
handle)
MODEL
REQUIREMENTS#
WEIGHT
"B"
140 lbs
ML24BN(S)
115V/60Hz/15A
(63.6 kg)
ML24BN(P)
«D»
"A"
(S) Solid Door
CABINET DIMENSIONS
"J"
"D"
"E"
237⁄8"
(60.7 cm)
333⁄4" to 343⁄4"
(85.7 to 88.3 cm)
"F"
237⁄8"
(60.7 cm)
7
34" to 35"
"D" 22 ⁄8"
(86.4 to 88.9 cm)
(58.1 cm)
Figure 7
Figure 7a
"C"
"A"
461⁄2"
"H"
(118.1 cm)
231⁄8"
(58.7 cm)
-
"H"
211⁄2"
(54.6cm)
"F"
Figure 9
"E"
"C"
"J"
2511⁄16"
(65.2 cm)
"D"
"J"
Figure 7
"E"
"D"
"G"
"H"
211⁄2"
(54.6cm)
"F"
Figure 9
"E"
"G"
Figure 7
"E"
"D"
* To install (P) models with the door face flush with adjacent cabinetry doors, custom decorative panel thickness
cannot exceed 3⁄4" (19 mm).
Figure 8
«D»
"H"
25215⁄/328"
4613⁄32"
(65.2 cm)
(65.09
cm) (117.9 cm)
"E"
"D"
"B"
"G"
2323⁄32"
(60.2 cm)
(58.7 cm)
"J"
(P) Solid Overlay "B"
Door (no handle)
«D»
(118.1 cm)
140 lbs
(63.6 kg)
115V/60Hz/15A
DOOR STYLE
-
140 lbs
(63.6 kg)
Figure 7a
If necessary to gain clearance inside the rough-in
211⁄2"
Figure 9
opening a hole can be cut "C"
through"E"
the adjacent cabi** Minimum rough-in opening required (54.6cm)
is to be larger than
net and the power cord routed through this hole to a
the adjusted height of the cabinet. "F"
power outlet. Another way to increase the available
"G"
opening depth is to recess the power outlet into the
A grounded
15 amp
dedicated
is required.
Follow
* To#install
(P) models
with
the door circuit
face flush
with adjarear wall to gain the thickness of the power
cord
plug.
all
local
building
codes
when
installing
electrical
and
Figure
cent cabinetry doors, custom decorative panel thicknessappli"D"8
Not all recessed outlet boxes will work for this applicaance.
cannot
exceed 3⁄4" (19 mm).
tion as they
are too
narrow, inside
but a recessed
outlet box
If necessary
to gain
clearance
the rough-in
Figure 7a
equivalent
Arlington
recommended
opening
a holetocan
be cut #DVFR1W
through theisadjacent
cabi- for
** Minimum rough-in opening required is to be larger than
(seerouted
Figurethrough
8).
netthis
andapplication,
the power cord
this hole to a
the adjusted height of the cabinet.
power outlet. Another way to increase the available
6
opening depth is to recess the power outlet into the
# A grounded 15 amp dedicated circuit is required. Follow
rear wall to gain the thickness of the power cord plug.
all local building codes when installing electrical and appli* To
install (P) models with the door face flush with adjaNot all recessed outlet boxes will work for this applicaance.
Drain pan, CO2 tank, hoses,
Width
23 ⅞"
Length of Power Cord
5'
Figure
8 box
Otheroutlet
Storage
cent
cabinetry doors,
custom decorative panel
thickness
tion as they are too narrow, but a recessed
regulator, floor shield
23 ⅞" W x 33 ¾" H
Interior Finish
White
3
Product
Dimensions
⁄
4" (19
mm).
cannot
exceed
equivalent to Arlington #DVFR1W is recommended
for
x 21 / " D (including handle)
Toe Grill Finish
Black
Half
kegs, tall quarterinside
kegs,
If this
necessary
to gain
clearance
the rough-in
application,
(see
Figure
8).
Depth to Front of Door
23 / "
Hinge
Classic Hinge
pony kegs,
sixth barrels,
Capacity
opening
a hole can cornelius
be cutkegs,
through
** Minimum rough-inDepth
opening
required is to 25
be/ "larger than
growlers, the adjacent cabito
Handle
Handle
/cans through this hole to a
6theDesigner
net and the power cordbottles
routed
adjusted height Depth
of the
cabinet.
with
door
at
90°
46
/ "
Type
Intuit™
power
outlet. Another way
increase theControl
available
Shelving System
Drop into
place
Shipping Weight
160 lbs
Temperature Range
34° - 46° F
opening depth is to recess the power outlet
into the
# A grounded 15 amp
dedicated circuit is required.
Follow
Agency Approvals
CSA
Shelf Fronts
Stainless Steel
Electrical Requirements
120V / 60Hz / 15A
rear wall to gain the thickness of the power cord plug.
all local building codes when installing electrical and appliNot all recessed outlet boxes will work for this applicaance.
tion as they are too narrow, but a recessed outlet box
equivalent to Arlington #DVFR1W is recommended for
this application, (see Figure 8).
5
8
23
5
13
6
marvelrefrigeration.com
|
800.223.3900
32
8
32