WLS LIGHTING SYSTEMS LXL SERIES DECORATIVE LED SPECIFICATIONS SMARTTEC™ THERMAL CONTROL - WLS drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperatures. EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. LEDS - Select high-brightness LEDs in Cool White (5000K) or Neutral White (4000K) color temperature, 70CRI. DISTRIBUTION - Types 3, FP, and 5. Exceptional uniformity creates bright environments at lower light levels. Improved backlight cutoff minimizes light trespass. HOUSING - One-piece housing/support frame is die-cast aluminum. Pole top access cover and support arms are die-cast aluminum. Housing is sealed with an extruded silicone gasket. HOUSING TOP CAP - Removable spun aluminum cap/driver enclosure is retained by captive stainless steel fasteners and safety cables. Housing and top cap interface is sealed with one-piece extruded silicone gasket. Tool-less entry option is available. DIMENSIONS Ø25-1/2” (648mm) SEALED OPTICAL UNIT - Lens is clear, flat tempered glass, sealed to aluminum optics housing. Pressure stabilizing breather allows super-tight protection while preventing REFLECTORS/DISTRIBUTION PATTERNS temperature cycling form building up internal pressures and vacuums that can stress optical unit seals and components. 46-5/8” (1184mm) 3-1/3” (84mm) Ø4” (102mm) FASTENERS - All exposed fasteners are black oxide coated stainless steel. Internal fasteners are stainless steel or zinc electroplated steel. Ø4” (102mm) or Ø5” (127mm) 24-1/2” (622mm) ELECTRICAL - A terminal block for attachments of incoming primary wiring is supplied. Twostage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC. Optional button-type photocells (PCI) are also available in 120, 208, 240,277 or 347 volt (supply voltage must be specified). Post Top with BK MPT BO (x2) Mounts to 4” or 5” Dia. D180 Bolt-on Pole Ø25-1/2” (648mm) Ø25-1/2” DRIVER - Available in Super Saver (SS) and High Output (HO) drive surrents (Drive currents are factory programmed). State-of-the-art driver technology designed specifically for WLS LED light sources provides unsurpassed system efficiency. Components are fully encased in potting material for moisture resistance. Driver complies with IEC and FCC standards. 18” (457mm) 42-1/4” (1072mm) 19-3/8” (492mm) OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F). 46-5/8” (1184mm) FINISH - Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process. Ø5” (127mm) Ø4” (102mm) Post Top Single Slipfits 4” Dia. Tenon or Pole 3-1/3” (84mm) 24-5/8” (625mm) Post Top with WM Accessory This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements. The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years. Standard colors include bronze, black, platinum plus, buff, white, satin verde green, graphite, and metallic silver. Custom colors available upon request. WARRANTY - WLS LED fixtures carry a limited 5-year warranty. ARRA wet location Funding Compliant Fixtures comply with ANSI C136.31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 1.5G uirements. req Approved By: Project Name: Location: Date: 1919 Windsor Place Fort Worth, TX 76110 Specifications subject to change without notice. 800.633.8711 Fax: 817.735.4824 www.wlslighting.com 01 Rev. 11/15 LXL SERIES DECORATIVE LED ORDERING INFORMATION SERIES DISTRIBUTION 3 - Type III 5 - Type V FP - Forward Throw LXL SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below. Mounting LIGHT DRIVE COLOR MOUNTING INPUT LUMINAIRE SOURCE CURRENT TEMPERATURE STYLE VOLTAGE FINISH OPTIONS BRZ - Bronze BLK - Black PLT - Platinum Plus BUF- Buff WHT - White GRN - Green GPT - Graphite MSV - Metallic Silver CC - Custom Color PC - Photocell TE - Tool-less Entry WM - Wall Mount BK MPT BO - Medium Bolt On Bracket (for PT 180) 2 DIM - 0-10V Dimming (from external source) 1 BLS - Bi-Level Switching (form external 120-277V signal) 1 NO - No Options CW - Cool White PT - Post Top UE - Universal (5000K) AM - Arm Mount Electronic NW - Neutral (120-277 V White (4000K) 50/60Hz) SS - Super Saver HO - High Output LED 347 480 LXL 5 LED HO CW PT UE BRZ NO (EXAMPLE ORDER) ORDER: WLS-LXL FOOTNOTES: 1 - DIM and BLS cannot be ordered together. 2 - Order poles with 3” reduced drilling pattern. For PT configurations other than D180, consult factory. LIGHT OUTPUT - LXL Series Neutral White Cool White POST TOP MOUNT # of LEDS SS 64 HO 64 SS 64 Type 3 6180 8670 5930 8250 Watts Lumens (Nominal) Type FT Type 5 (Nominal) 5570 8270 5350 7560 5240 7510 5150 6890 64 HO LED Chips are frequently updated therefore values may increase. LUMINAIRE EPA CHART - LXL Series SHIPPING WEIGHTS - LXL Series MOUNTING STYLE Catalog Number PT Single PT 1.4 PT D180° PT 2.7 LXL (PT) Approved By: Project Name: Location: Date: 1919 Windsor Place Fort Worth, TX 76110 70 108 70 108 800.633.8711 Fax: 817.735.4824 www.wlslighting.com Est. Weight (kg/lbs.) 29/64 01 Rev. 1/17
© Copyright 2024 Paperzz