Revolution 52 Aluminum Flatbed (model: HAR5212WSA)
Length x Width: 48 feet x 102 inches
Suspension type: wide spread air
Frame rating: 80,000 lbs distributed (52,000 lbs concentrated
Tires: 275/80R 22.5 14PR premium OEM tires provided by
Flooring: knurled extruded 3 1/8 aluminum, multi-hollow
Auto glad hand dump: installed
Electric dump valve: wired to 7-way auxiliary socket to dump
in 4 feet)
friction stir welded floor with two wood nailer strips (nailer
strips provided by OVERSEAS HARDWOOD COMPANY)
Side Rails: Revolution technology – one piece aluminum
Tire inflation: TIREMAAX inflation system provided by
HENDRICKSON
Suspension detail: AANT23K Intraax air ride provided by
HENDRICKSON
rear axle
Front and rear corners: tapered
Electrical system: exclusive Revolution technology: provided
extrusion
Stationary chain cargo tie downs: 15 pair recessed in
siderails
Stake pockets: routed aluminum on 24 inch centers (two load
securement openings between stake pockets)
Rubrail: integrated with side rail
Main beams: extruded aluminum (8.25 inch flange with 26
inch beam height)
Kingpin: 30 inches
Loaded fifth wheel height: 49 inches
Landing gear: model A400 provided by JOST INTERNATIONAL
Bulkheads: none standard
Bulkhead pockets: none standard
Number of axles: 2
Axle spindle: tapered
Brakes: spring brakes, auto slacks
ABS: 4S/2M (no cable or tool)
Axle spread: 122 inches (set at rear)
Hub and drums: 10-hole hub-piloted ADI with outboard
fused drums
Wheel ends: grease in hubs *** 5-year wheel end warranty ***
Wheels: 22.5 x 8.25 Alcoa LvL One buffed aluminum wheels
provided by MAINTENANCE PLUS OF BIRMINGHAM, AL
MAINTENANCE PLUS OF BIRMINGHAM, AL
by GROTE INDUSTRIES (LED lights: 5 marker lights per side,
3 rear recessed light bars, 10-year comprehensive electrical
system warranty)
Paint: black urethane on steel parts with Revolution decals
Conspicuity tape: per NHTSA specs (installed in recess on
rubrails)
Bumper: meets U.S. underride requirements
Mudflaps: 2 sets Revolution
Winch track: dual full-length integrated aluminum (double L)
Sliding winches: 12 winches provided by ANCRA
INTERNATIONAL, LLC
Winch straps: 12 winch straps installed (27 feet x 4 inches
each) Provided by ANCRA INTERNATIONAL, LLC
Dock bumpers: 1 pair rubber on rear
Hubodometer: none standard
Registration holder: install (OEM standard)
Tool Box: 1 aluminum double-door box provided by
AERO INDUSTRIES (18 inches x 24 inches x 60 inches)
includes 4 sliding securement devices and 4 chocks
VIN plate: standard US VIN plate
Estimated total weight w/o options: 8,348# +/- 3%
Estimated total weight with options: 8,584# +/- 3%
Corporate Headquarters • 3515 Industrial Way • Jasper, Alabama 35501 • 800-821-6535 • www.fontainetrailer.com
©2011 Fontaine Trailer Company • Photo may show some optional equipment • Specifications subject to change without notice