NEER WATER SOFTENER
Raw Water is termed “Hard Water” when it contains dissolved salts of Calcium &
Magnesium. Temporary alkaline or carbonates of calcium & magnesium, Permanent
non alkaline or noncarbonated hardness is caused by dissolved chlorides, sulphates
or nitrates of calcium & magnesium, Softener removes hardness in water.
Process
The softening process consists of passing raw water containing hardness through a
bed of cation resin in sodium form. The hardness ions Ca & Mg are taken up by resin
and in exchange sodium ions are relinquished from the resin. Raw water will
continue to get softened till the resin gets exhausted. Bringing back the resin to it
original form is called regeneration. Softener resin is regenerated by sodium chloride
(NaCl) of 10 -15% Concentration.
B-WING, OFF. NO. BR2-330, THIRD FLOOR, JAI GANESH VISION, AKURDI, PUNE (MAHA.), INDIA.
PH. +91 020 46780175, MAIL: [email protected]
VISIT: www.neerps.com
Requirement for Designing Softener: Hardness of Water, Flow Rate/Hour,
Single Charge Softening.
WE OFFER ALL RANGES OF WATER SOFTNER
Parameters
Neer-15
Neer-30
Neer-55
Neer-80
Neer-105
Neer-140
Resin Qty.
15 ltr.
30 ltr.
55 ltr.
80 ltr.
105 ltr.
140 ltr.
OBR @ 100
ppm
Hardness
7.5 M 3
15 M 3
28 M 3
40 M 3
55M3
80M3
Min. Working 2.0 Kg / cm² 2.0 Kg / cm² 2.0 Kg / cm² 2.0 Kg / cm² 2.0 Kg / cm2
Pr.
2.0 Kg / cm2
4.0 Kg / cm² 4.0 Kg / cm² 4.0 Kg / cm² 4.0 Kg / cm² 4.0 Kg / cm²
Max.
Working Pr.
4.0 Kg / cm²
Size & Type
of Valve
Top
Mounted
MPV 3/4”
Top
Mounted
MPV 3/4”
Top Mounted
MPV 3/4”
Top
Mounted
MPV 3/4”
Top
Mounted
MPV 1½”
Top Mounted
MPV 1½”
Regenerates
Qty.
Na Cl / 2.5
Kg.
Na Cl / 5
Kg.
Na Cl / 8.5
Kg.
Na Cl / 12
Kg.
Na Cl / 15
Kg.
Na Cl / 20 Kg.
Resin
Thermax
Make
Thermax
Make
Thermax
Make
Thermax
Make
Thermax
Make
Thermax Make
Vessel
FRP
FRP
FRP
FRP
FRP
FRP
Max. Flow
Rate
2 M 3 / Hr.
2 M 3 / Hr.
2 M 3 / Hr.
2 M 3 / Hr.
3 M3 / Hr.
4 M3 / Hr.
8” x 24”
8” x 44”
10” x 54”
12” x 48”
Vessel Dia. &
Height
13” x 54”
14” x 65”
B-WING, OFF. NO. BR2-330, THIRD FLOOR, JAI GANESH VISION, AKURDI, PUNE (MAHA.), INDIA.
PH. +91 020 46780175, MAIL: [email protected]
VISIT: www.neerps.com
Parameters
Neer-200
Neer-250
Neer-330
Neer-480
Neer-750
Neer-1000
Resin Qty.
200 ltr.
250 ltr.
330ltr.
480 ltr.
750 ltr.
1000 ltr.
OBR @ 100
ppm
Hardness
100 M 3
125 M 3
165 M 3
240 M 3
375M3
500M3
Min. Working
Pr.
2.0 Kg /
cm²
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm² 2.0 Kg / cm2
2.0 Kg / cm2
Max. Working
Pr.
4.0 Kg /
cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm² 4.0 Kg / cm²
4.0 Kg / cm²
Size & Type
of Valve
Top
Mounted
MPV 1½”
Side
Mounted
MPV 1½”
Side Mounted
MPV 1½”
Side
Mounted
MPV 1½”
Side
Mounted
MPV 1½”
Side Mounted
MPV 1½”
Regenerates
Qty.
Na Cl / 25
Kg.
Na Cl / 30
Kg.
Na Cl / 40 Kg.
Na Cl / 60
Kg.
Na Cl / 90
Kg.
Na Cl / 120 Kg.
Resin
Thermax
Make
Thermax
Make
Thermax
Make
Thermax
Make
Thermax
Make
Thermax Make
Vessel
FRP
FRP
FRP
FRP
FRP
FRP
Max. Flow
Rate
3 M3 / Hr.
3 M 3 / Hr.
4 M 3 / Hr.
4 M 3 / Hr.
5 M3 / Hr.
5 M3 / Hr.
16” x 65”
18” x 65”
21” x 62”
24” x 72”
30” x 72”
36” x 72”
Vessel Dia. &
Height
Note. : - Inlet Water should be colorless free from turbidity, oil, grease, Organic Matter.
Treated water quality depends on Raw Water Analysis.
(FRP Vessels & MPV can also be used for Filter & DM Plants)
B-WING, OFF. NO. BR2-330, THIRD FLOOR, JAI GANESH VISION, AKURDI, PUNE (MAHA.), INDIA.
PH. +91 020 46780175, MAIL: [email protected]
VISIT: www.neerps.com