LED FTD DL/5
recessed LED
Spec Sheet
L E D
0-070
downlight
FULLY SUSTAINABLE – FULLY SUSTAINABLE – FULLY SUSTAINABLE – FULLY SUSTAINABLE – FULLY SUSTAINABLE – FULLY SUSTAINABLE – FULLY SUSTAINABLE
Features
LED FTD DL/5 is a 5” aperture downlight employing LED technology. Fixture
is 7 3/8” deep. Precise reflector design yields an optical efficiency of 90%,
minimizes aperture brightness and provides a shielding angle of 40°.
Fixture is powered by an integral Philips Fortimo DLM remote phosphor LED
module, dimmable to 10% with a 0-10 volt dimmer, with a CRI of 80 and a
5-year warranty from Philips. Fixture may be specified with modules of 1100,
1300, 2000 or 2800 lumen light output and with 2700K, 3000K, 3500K
or 4000K color. Refer to the performance tables on the reverse for system
wattages and luminaire efficacies.
Standard luminaire operates on either 120-volt or 277-volt electrical service.
Standard driver permits dimming to 10% with a 0-10V dimmer. An optional
PRODUCT CODE
For complete product code, list basic unit and select one item from each following box.
Lutron® driver permits dimming to 1%.
LED FTD DL/5 modules include an integral plastic shield, making the fixture
suitable for food service areas and other applications requiring protection
from lamp failure.
Reflector is available in two clear natural aluminum finishes – semi-specular
Alzak (C) or slightly diffuse (V) – as well as champagne gold and black.
Other reflector finishes are available on special order.
LED FTD DL/5 includes a pair of mounting bars (¾” x 27” C channel).
Specialty bars for wood joist and T-bar installations are also available.
APPLICATIONS
Fixture is recommended for downlighting in commercial, retail and
residential spaces.
Fixture is
Requires ceiling opening of 5 15/16” (151mm) for Overlap or Flush Detail.
Requires ceiling opening of 6 3/16” (157mm) for Trim Flush Detail.
listed for Damp Location. Fixture is prewired with thermal
protector, approved for ten #12 wire 90° branch circuit pull-through wiring
and suitable for use in a fire rated ceiling.
Fixture with an 1100 lumen module is
Title 24 (2008) compliant. All fixtures
are RoHS compliant. Removal of
the reflector allows access
to the junction box.
SPACING REQUIREMENTS
Luminaires with 2000 or 2800 lumen LED modules must be spaced
30” apart and 15” from walls, and must have ½” clearance above
housing.
MODIFICATIONs AVAILABLE
Contact factory with quantity for pricing; orders may require shop drawing approval.
Basic Unit.................................................................LED-FTD-DL/5
NOTE: Standard driver is dimmable to 10% with a 0-10 volt dimmer.
Light Output
1100 lumens ................................................................... 1100
1300 lumens.................................................................... 1300
2000 lumens ...... note spacing requirements; see box below.......... 2000
2800 lumens ...... note spacing requirements; see box below.......... 2800
Light Engine Color
2700K (CRI 80)................................................................ 2700
3000K (CRI 80)................................................................ 3000
3500K (CRI 80)................................................................ 3500
4000K (CRI 80)................................................................ 4000
Voltage
120 volt service...................................................................120
277 volt service.................................................................. 277
Reflector Color and Detail
Overlap Flange Flush
Trim Flush*
Semi-specular Clear....................COL ............. CFL.................CTF
Slightly diffuse Clear...................VOL ............. VFL................. VTF
Champagne Gold..................... GOL ............. GFL.................GTF
Black........................................BOL ............. BFL................. BTF
Other reflector finishes available on special order.
Overlap Flange continues reflector finish. White painted flanges and custom painted flanges
are available on special order. Add WF (white flange) or CCF (custom color flange).
*Trim Flush reflector trim requires the use of a plaster ring Accessory (see below).
OPTIONS
Specify by adding to the basic unit.
Dimmable...................... standard driver is dimmable to 10% with a 0-10
volt dimmer and is suitable for either 120 or 277 volt operation.
Dimmable to 1% with Lutron® driver, compatible with Lutron 3-wire
fluorescent dimmer or EcoSystem Bus Control; suitable for 120 or
277 volt operation; not suitable for 2800 lumen engine ............ – DLU
Emergency battery pack; increases depth to 10 3/8”,
increases footprint length to 17 ½” and 3” additional
clearance needed to service pack through aperture ................... – EM
accessories
Specify as a separate line item.
Plaster ring allows use of 5 7/8” OD Trim Flush (-TF)
reflector in sheetrock ceiling; 6 3/16” dia hole required . ....TF RING/5
+DOD:luminaire suitable for high humidity environments; add +DOD to Product Code.
+FL:reflector flush trim detail for metal or wood ceilings; add +FL to Product Code.
+MAR:reflector suitable for marine environments; add +MAR to Product Code.
41-50 22ND STREET, L IC NY 11101
tel 718.685.0700
U.S. Patent No. US 7,744,256 B2 (June 29, 2010)
©
Copyright, Edison Price Lighting 2012
fax 718.786.8530 www.epl.com
11:12
LED FTD DL/5
PHOTOMETRIC REPORT (tested per IESNA LM-79-2008)
Report No. 21228 and 21291. Original Luminaire Testing Laboratories, Inc. (LTL) test report furnished upon request.
Luminaire.......................... recessed LED round downlight with aluminum reflector
Lamp................................ Philips LED Fortimo DLM 2000, 3000K CCT
Spacing Criteria................ 1.0
Luminaire light output.......... 1631 lumens
standard (0-10V DIMMING) DRIVER INFORMATION
CANDLEPOWER DISTRIBUTION(Candela)
UL Class 2, dry and damp location
Vertical Horizontal Angle
Angle
0
Input Watts
(1100/1300/2000/2800 lumens, 3000K LED)
0
5
15
25
35
45
55
65
75
85
90
Voltage
1469
1480
1472
1334
666
37
3
1
1
0
0
Input Current (A)
(1100/1300/2000/ 2800 lumens, 3000K)
120
277
16/18/33/42
16/18/33/42
.13/.15/.28/.35 .06/.07/.12/.15
Output Current (mA)
620-880
620-880
Output Voltage (Vdc)
20–47
20–47
Min. Power Factor
>0.9
>0.9
–4 to 131
–4 to 131
Operating Temperature Range (F)
light output multipliers
1100 lumen
light engine
1300 lumen
light engine
2000 lumen light engine
2800 lumen
light engine
EM pack light output
(90 minutes)
1
1.4 (estimated)
.30 (measured)
.61 (estimated) .71 (estimated)
luminaire light output and efficacy
Color
1100 lumens light engine 1300 lumens light engine 2000 lumens light engine
Luminaire Luminaire Luminaire Light Luminaire System
Light Luminaire System
Light Luminaire System
Output
Efficacy Wattage Output Efficacy Wattage
Output Efficacy Wattage
2800 lumens light engine
Luminaire
Light Luminaire System
Output Efficacy Wattage
2700K
995*
62
16
1165*
65
18
1631
49
33 2283*
54
3000K
995*
62
16
1165*
65
18
1631
49
33
2283*
54
42
3500K
995*
66
15
1165*
69
17
1631
51
32
2283*
59
39
4000K
995*
66
15
1165*
69
17
1631
53
31
2283*
59
39
*estimated values
ZONAL LUMEN SUMMARY
Zone
0- 30°
0- 40°
0- 60°
0- 90°
90-180°
0-180°
Lumens
1155
1566
1629
1631
0
1631
% Fixture
70.8
96.0
99.9
100.0
0.0
100.0
color multipliers
LUMINANCE data
EvenTone (V)
.95
Champagne Gold (G)
.95
Vertical
Angle
Black (B)
.49
45
55
65
75
85
2
Candela/m
4200
386
246
230
246
42