Dozers
D6R Track-Type Tractor
Specifications
Technical Data
Engine
Model
Maximum Gross Power @ 1800 rpm- ISO 14396
Maximum Net Power @ 1800 rpm - ISO 9249
Rated Gross Power @ 2000 rpm - ISO 14396
Rated Net Power @ 2000 rpm - ISO 9249
Bore
Stroke
Displacement
Weights
Operating
Shipping
Hydraulic Controls
Cat C9 ACERT
Bulldozer
Bulldozer Tilt
Tilt Cylinder
Ripper (Lift)
Ripper (Pitch)
19 300 kPa 2,799 psi
19 300 kPa 2,799 psi
19 300 kPa 2,799 psi
19 300 kPa 2,799 psi
19 300 kPa 2,799 psi
Steering
40 000 kPa 5,802 psi
152 kW, 204 hp
139 kW, 186 hp
148 kW, 198 hp
131 kW, 175 hp
112 mm, 4.4 in
149 mm, 5.9 in
8.8 L, 537 in3
18 225 kg, 40179 lb
15 017 kg, 33106 lb
Transmission
Fwd. 1st
2nd
3rd
Blades
3.8 kph, 2.3 mph
6.6 kph, 4.1 mph
11.5 kph, 7.1 mph
Rev. 1st
2nd
3rd
S-Blade Capacity
S-Blade Width
Ripper
3.89m3, 5.09 yd3
3360 mm, 11 ft 0in
Type
Number of pockets
Overall beam width
Beam cross section
Max clearance raised
Max Penetration
Max Penetration Force
Pry out Force
Weight
Fuel Burn
Pixed Parallelogram
3
2202mm, 87 in
216 x 254mm, 8.5 x 10 in
511mm, 20.1 in
500 mm, 19.7 in
6603 kg, 14557 lb
9134 kg, 20137 lb
1782 kg, 3932 lb
Low
Medium
High
14.8-21.2 Litres per hour
21.2-27.3 Litres per hour
27.3-33.7 Litres per hour
4.8 kph, 3mph
8.4 kph, 5.2mph
14.6 kph, 9.1 mph
www.ezyquip.com.au // 1300 EZYQUIP (1300 399 784)
109
D6R Track-Type Tractor Specifications
3195mm
383mm
1880mm
2440mm
576mm
2664mm
65mm
3860mm
www.ezyquip.com.au // 1300 EZYQUIP (1300 399 784)
110
D7E Track-Type Tractor
Specifications
Technical Data
Engine
Model
Engine Power - SAE J1995
Engine Power - ISO 14396
Engine Power - ISO 14396 (DIN)
Net Power (Rated) - SAE J1349/ ISO 9249
Net Power (Rated) - SAE J1349/ ISO 9249 (DIN)
Net Power (Maximum) - ISO 9249/SAE J1349
Net Power (Maximum) - ISO 9249/ SAE J1349 (DIN)
Bore
Stroke
Displacement
Cat® C9.3 ACERT™
201 kW 270 hp
198 kW 266 hp
270 hp
175 kW 235 hp
238 hp
187 kW, 251 hp
254 hp
115 mm, 4.5 in
149 mm, 5.9 in
9.3 L, 567 in3
Maximum engine power at 1600 rpm, rated net power at 1700 rpm, maximum net power at 1450 rpm. Net power advertised is the power avaliable at the flywheel when
engine is equipped with fan, air cleaner, and muffler. No derating required up to 3200m (10500ft) altitude, beyond 3200m (10500ft) automatic derating occurs. all nonroad
US EPA Tier 4, European Union (EU) stage IIIB and IV, and Japan (MLIT) step 4 certified diesel engines are required to use: Ultra low sulfur diesel (ULSD) and Sulfur-free
fuels that are 15 ppm (mg/kg) sulfur or less. Cat DEO-ULSTM or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification.
Weights
Operating
Shipping
Hydraulic Controls
26 055 kg 57,441 lb
21 955 kg 48,402 lb
Bulldozer
27 600 kPa 4,000 psi
Tilt cylinder
27 600 kPa 4,000 psi
Ripper (lift)
27 600 kPa 4,000 psi
Ripper (pitch)
27 600 kPa 4,000 psi
Steering
41 000 kPa 5,950 psi
Ripper
Type
Number of pockets
Multi-Shank
Overall beam width
2088 mm, 82.2 in
Beam cross section
355 mm, 14.0 in
3
Maximum clearance raised (under tip, pinned in bottom hole)
588 mm, 23.1in
Maximum penetration
650 mm, 25.6 in
Maximum penetration force
87.4 kN, 19639 lbf
Pry out force
234.4 kN, 52695 lbf
Weight - with one shank
1650kg, 3572 lb
Each additional shank
150kg, 330 lb
Ramp angle
26o
Pocket spacing
900 mm, 35.4 in
Shank gauge
1800 mm, 70.9 in
Shank section
72 mm x 228 mm, 2.8 in x 9.0 in
www.ezyquip.com.au // 1300 EZYQUIP (1300 399 784)
111
D7E Track-Type Tractor Specifications
Drive Train
Type
AC Compressor - Nominal input voltage
AC Compressor - Maximum input current
Electric water pump system nominal input voltage
Electric water pump system nominal input current
AC Generator and propulsion module voltage
Electric Drive
320 volts
12 Amps
320 volts
5 Amps
480 volts
Nominal current is dependent on heat/humidity loading on HVAC unit. Measured with water pump operating speed of 4400 rpm. Measurement is 1 Amp with the
water pump operating speed of 2100 rpm.
Fuel Burn
Low
Medium
High
14.8 - 20.8 Litres per hour
20.8 - 27.2 Litres per hour
27.2 - 34.5 Litres per hour
3392mm
472mm
1981mm
2880mm
719mm
3016mm
70mm
4608mm
www.ezyquip.com.au // 1300 EZYQUIP (1300 399 784)
112
D10T Track-Type Tractor
Specifications
Technical Data
Engine
Model
Gross Power - SAE J1995
Gross Power - ISO 14396
Net Power - SAE J1349/ ISO 9249 Min Fan
Net Power - SAE J1349/ ISO 9249
Net Power - 80/1269/EEC
Bore
Stroke
Displacement
Weights
Operating
Shipping
Hydraulic Controls
Cat C27 ACERT
Pump Type
Gear
Lift Cylinder Flow
404 L/min 107 gal/min
Tilt Cylinder Flow
112 L/min 30 gal/min
Bulldozer Relief Valve Setting
18 790 kPa 2,725 psi
Tilt Cylinder Relief Valve Setting
20 340 kPa 2,950 psi
Ripper (Lift) Relief Valve Setting
18 790 kPa 2,725 psi
Ripper (Pitch) Relief Valve Setting
Tank Capacity
18 790 kPa 2,725 psi
482 kW, 646 hp
471 kW, 632 hp
450 kW, 603 hp
433 kW, 580 hp
433 kW, 580 hp
137.2 mm, 5.4 in
152.4 mm, 6 in
27 L, 1647.6 in3
66 451 kg, 146,499 lb
48 263 kg, 106,402 lb
144 L 38 gal
Transmission
Fwd. 1st
2nd
3rd
Blades
4 km/h 2.5 mph
7.2 km/h 4.5 mph
12.7 km/h 7.9 mph
Rev. 1st
2nd
3rd
Type
Capacity (SAE J1265)
10SU
Width (over end bits)
4860 mm, 15 ft 11 in
Height
2120 mm, 6 ft 11 in
Digging Depth
674 mm, 26.5 in
Groud clearance
1497 mm, 58.9 in
Maximum tilt
993 mm, 39.1 in
Weight*
10229 kg, 22551 lb
Total operating weight**
66451 kg, 146499 lb
5.2 km/h 3.2 mph
9 km/h 5.6 mph
15.8 km/h 9.8 mph
18.5 m3, 24.2yd2
* Includes blade tilt cylinder without hydraulic controls
** Total operating weight: including hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel,
ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) ES shoes, and operator.
www.ezyquip.com.au // 1300 EZYQUIP (1300 399 784)
113
D10T Track-Type Tractor Specifications
Ripper
Type
Added Lenght
Number of pockets
Max clearance raised
Maximum penetration
Maximum penetration force (shank vertical)
Pry out force
Weight
Type
Number of Pockets
Added lenght
Overall Beam Width
Single-Shank,Adjustable Parallelogram
1760 mm 5 ft 9 in
1
1058mm, 41.7in
1494mm, 58.8in
205kN, 46086lb
415.3kN, 93363lb
7117kg, 5ft 10in
Multi-shank, Adjustable Parallelogram
3
1760mm, 5ft 10 in
2920 mm 115 in
Maximum Clearance Raised
1045 mm 41.1 in
Maximum Penetration
876 mm 34.5 in
Maximum Penetration Force (shank vertical)
205 kN 46,086 lb
Pry out Force
415.3 kN 93,363 lb
Weight
7968 kg 17,566 lb
Additional Shank
526.2 kg 1,160 lb
Total Operating Weight* (with SUBlade and ripper)
Fuel Burn
67 302 kg, 148,375 lb
Low
Medium
High
43.9 - 62.6 Litres per hour
62.6 - 81.4 Litres per hour
81.4 - 100.2 Litres per hour
3292, 3736mm
3, 4
4505mm
2550mm
2
5
864mm
664mm
1
4098mm
4354mm
7
6
8
3872mm
9
5339mm
10, 11, 12
7416mm
13, 14
7081mm
15, 16
17
www.ezyquip.com.au // 1300 EZYQUIP (1300 399 784)
114