EUAZ-04 Base frame, EUAZ-05 Adjustable feet, sizes 11–53

EU Air Handling Unit
INSTALLATION
EUAZ-04 Base frame, EUAZ-05 Adjustable feet, sizes 11–53
To assemble the base frame delivered in
“knocked-down” condition
The base frame is delivered in "knocked-down" condition in a package together with the necessary bolts and
nuts.
Assemble the base frame as shown in Fig. 1, using one
cross-beam at every beam joint and, if required, several
cross-beams evenly distributed along the base frame.
Arrange the beams so that
they are level, tighten the
M8 screws/nuts through
the angle bracket, beam
and cross beam to 28 Nm
Jointing piece
Cross-beam
Drill 4 ø7.3 mm holes using the
ø 6.3 pilot holes provided and fit
M8 Taptie self-tapping screws
as safety screws.
Fig. 1
To fit (secure) the unit to the base frame
Fitting adjustable feet
Fit one angle bracket (1), included in the EUAZ-16 jointing set, at each end of the base frame. Fit the remaining
angle brackets spacing them evenly along the beams.
Secure them with self-tapping screws (2).
The feet are fitted with even spacing along the side rails
if the number of feet is greater than 4. In the case of 4
feet, 1 foot should be fitted at each end of the side
beams.
2
1
Casing
Adjustment of set-screws:
1) Release the locking
nut (A).
2) Adjust the height
with the set-screw
(B).
3) Retighten the
locking nut (A).
150
A
B
Fig. 3
Fig. 2
Length of base frame
030 - 200
210 - 400
410 - 600
610 - 750
760 - 960
Fläkt Woods
4072 GB 03.01
1
Number of adjustable feet
4
6
8
10
12
Specifications are subject to alteration without notice
EU Air Handling Unit
INSTALLATION
EUAZ-04 Base frame, sizes 60–84
Base frame for EU(B,G)B
All screws and nuts required for assembling the base
frame are included in the supply.
3
2
1
4
Sizes
64, 73, 82, 84
6
5
1. Beam
2. Hole for lifting tube
3. Channel-section connection piece with welded nuts (M10)
4. Retaining plate, long
5. Retaining plate, short
6. End plate
7. Bolt (M10) fitted in corner piece of the unit
8. Bolt (M10)
9. Nut (M10)
10. Self-tapping screw
11. Drill, ø 7.3 mm dia. holes in the frame of the unit during
installation.
8
7
EUAZ-04
8
8, 9
7
10
11
Quantity
bb *)
ccc (cm)
d
1
3
4
60, 62, 64
71, 75
80, 82, 84
035–300
305–600
1
2
4
2
2
Item no.
5
6
4
4
4
4
8
9
10
20
40
20
20
4
*) For code suffix bb = 64, 73, 82, 84; ccc max. = 300 cm.
Fläkt Woods
4072 GB 03.01
2
Specifications are subject to alteration without notice