Compatibility table

Compatibility table
Camera
EOS 5D
EOS 5D Mk II
EOS 5D Mk III
EOS 6D
EOS 7D
EOS 10D
EOS 20D/20Da
EOS 30D
EOS 40D
EOS 50D
EOS 60D/60Da
EOS 70D
EOS 300D
EOS 350D
EOS 400D
EOS 450D
EOS 500D
EOS 550D
EOS 600D
EOS 650D
EOS 700D
EOS 1000D
EOS 1100D
EOS M
EOS D30
EOS D60
Battery magazine
Camera
battery
pack
Battery
grip
BP-511A
LP-E6
LP-E6
LP-E6
LP-E6
BP-511
BG-E4
BG-E6
BG-E11
BG-E13
BG-E7
BG-ED3
direct fit
direct fit
BGM-E11L
BGM-E13L
direct fit
direct fit
BGM-E2
BGM-E6
BGM-E11A
BGM-E13A
BGM-E6
not available
BP-511A
BG-E2/N*
direct fit
BGM-E2
LP-E6
LP-E6
BP-511
BG-E9
BG-E14
BG-E1
BGM-E9L
BGM-E14L
direct fit
BGM-E9A
BGM-E14A
not available
NB-2LH
BG-E3
BGM-E3L
BGM-E3A
LP-E5
BG-E5
BGM-E5L
BGM-E5A
LP-E8
BG-E8
BGM-E8L
BGM-E8A
for one or two for six AA-size
battery packs
batteries
LP-E8
LP-E5
LP-E10
LP-E12
BG-E8
BGM-E8L
BGM-E8A
BG-E5
BGM-E5L
BGM-E5A
Canon battery grip not available (see notes)
Canon battery grip not available
BP-511
BG-ED3
direct fit
AA batteries
cannot be used
* The BG-E2 and BG-E2N are both compatible with the EOS 20D,
30D, 40D and 50D. The BG-E2N was introduced with the EOS 40D
and adds a weatherproof seal to the battery compartment.
Direct fit means that the battery packs are inserted into the battery
grip without the need for a magazine tray.
© EOS magazine 2013
Notes
EOS 1D/1Ds series cameras
The EOS professional models are not listed in the table above because they all have
built-in battery grips, complete with a second set of controls for shooting in the portrait
format. The cameras use a battery pack (Ni-MH or Lithium-ion, depending on model)
which slides in from the side of the camera. Size AA batteries cannot be fitted.
EOS 1100D
There is a Battery Grip BG-E9, and a BG-E11, but no BG-E10. Logically, this would be
the grip for the EOS 1100D, but there is no grip for this camera mentioned in the instruction manual, nor in any Canon listing. If you do an internet search for BG-E10 you will
find quite a few compatible from third-party manufacturers, but so far we have not seen
a genuine Canon BG-E10 grip. Our guess is that Canon feels there will be insufficient
demand for a grip to fit this entry-level model, but has left its options open.
© EOS magazine 2013