ENCAUSTIC TILES
________________________________________________________________________________________________
Using cultural inspiration where Western elegance and Eastern mystery meets, bringing together ancient and modern beauty. The encaustic cement tile has been produced for over a century, methods passed on for generations. The remarkable handicraft masterpieces created by artisans, through know-­‐how and passion resulting in unique works of art which are appreciated worldwide. Over 50 colours currently available. Patterns, designs, borders and corners also available and can be customised. m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au
ENCAUSTIC TILES
________________________________________________________________________________________________
White 834
Light Grey 8.2
Mid Grey 8.4
Wheat SLY
Latte 9.4
Taupe 839
Leaf Green 8
Storm 5.3
Red 840
Terracotta
Olive 7
Breeze 5.4
Purple SPK
Black 800
m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au
ENCAUSTIC TILES
________________________________________________________________________________________________
Emma Pattern
2 x 2 tile pattern shown above
Incorporates colours White 834, Black 800
and Storm 5.3
Renaissance Pattern
2 x 2 tile pattern above
Incorporates colours White 834, Black 800
and Taupe 839
Oval Pattern
2 x 2 tile pattern above
Incorporates colours White 834 and Mid-Grey 8.4
Round Pattern
2 x 2 tile pattern above
Incorporates colours White 834, Purple SPK and
Chocolate 19
m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au
ENCAUSTIC TILES
________________________________________________________________________________________________
Dark Cross Pattern
2 x 2 tile pattern above
Incorporating colours White S834, Mid Grey S8.4,
Black S800,
Triangle pattern
2 x 2 tile pattern above
Incorporating stock colours White S834, Purple SPK,
Storm S5.3
Moroccan Pattern
2 x 2 tile pattern above
Incorporating stock colours White S834,
Leaf Green 8, Terracotta S840, Black S800
m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au
ENCAUSTIC TILES
________________________________________________________________________________________________
DIAMOND pattern
2 x 2 tile pattern shown
PEONY pattern
2 x 2 tile pattern shown
STEEL
LIGHT CROSS
2 x 2 tile pattern
m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au
ENCAUSTIC TILES
________________________________________________________________________________________________
MANUFACTURER’S INSTALLATION GUIDE:
Before installation, please keep tiles in boxes in a dry place. Avoid being in contact with
water or humidity as it may cause tiles to be stained.
Encaustic cement tiles are made from natural materials. Most of the manufacturing
process is by hand. Therefore, the tiles are subject to certain color variations. We
recommend you check your tiles carefully before installation. We will not be responsible for
tiles which have been installed. When installing, please take out the tiles randomly from
different boxes to have a better distribution and blending of the variations in the material.
Encaustic cement tiles are a commercial product widely used in both commercial and
domestic installations, but by their nature will patina and age. This adds beauty if the
viewer appreciates the “lived” and “soft” nature of the product.
LAYING.
Cement tile installation is a simple process. However, great care should be taken during
handling and installation to avoid causing any damage to the tile surface and edges.
The tiles should be laid on a perfectly level and clean surface. The joint between tiles is
normally about 2-3 mm.
Remove any dust or residue from the back of the encaustic tile and substrate. Be aware
that the cement backing of the tile is absorbent and sponging the substrate or back of the
tile with water may be necessary.
Work clean. Any residue of glue on tile surface should be cleaned immediately. Dried glue
residue may cause staining.
GROUTING
Tiles are pre-sealed with a very thin layer of wax. This wax is only temporary and partial
protection for handling and installation.
Wet the surface or the tile prior to grouting either with a spray bottle or sponge. Apply grout
and remove all excessive grouting material before setting. Test any strong grout colours
eg. black on an off-cut to ensure that staining will not occur during grouting.
Work clean. Remove all grout haze with clean water prior to grout setting. Should haze
residue set on the tile then removal must be with a non-acidic cleaner. Any acid based
cleaners will attack the tile surface.
m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au
ENCAUSTIC TILES
________________________________________________________________________________________________
After the tiles are completely dry, apply a sealer. Always follow the instructions of the
manufacturer. We recommend Aqua-Seal products.
Watermarks or efflorescence may occur in wet areas (shower floors etc) during the 30 day
curing period. Micro scrub can be used for removal.
A`nge Kokkaliaris from Aqua-Seal offers professional advice and is experienced with all
the sealing products.
For a new construction, please cover the floor with a good protecting material so that other
contractors do not damage the floor.
CLEANING & MAINTAINENCE:
- Refer to Sealer Manufacturer’s recommendations.
m2 tiles
259 Stirling Hwy, Claremont WA 6010
Ph 08 93847777 Fax 08 93852243
Email: [email protected]
Website: m2tiles.com.au