Standards
Certification
Education & Training
Publishing
To learn more
about MFPT, visit
www.mfpt.org
ON
TA
TI
EN
M
RU
ST
IN
AN SIG
AL NA
YS L
IS
F
AN AIL
AL UR
YS E
IS
Provider #1001262
ISA is accredited by the International Association for Continuing
Education and Training (IACET). ISA complies with the ANSI/IACET
Standard, which is recognized internationally as a standard of
excellence in instructional practices. As a result of this accreditation,
ISA is authorized to issue the IACET CEU.
Sponsored by theAerospace Industries,Test Measurement, a nd
Process Measurement and Control Divisions of ISA in collaboration
with ISA’s Automatic Controls and Robotics (ACARD) and Chemical
and Petroleum Industries (CHEMPID) Divisions and the Propulsion
Instrumentation Working Group (PIWG)
By attending IIS 2016 and gaining high-value ISA technical training
at the event, you’ll optimize your time, and improve your knowledge
and skills in the field of instrumentation. To register or learn more,
visit www.isa.org/IIS/T2016 or call +1 919-549-8411.
Mention promo code 16TIIS.
Visit www.isa.org/IIS/T2016
for event details and to register.
G
$725 ISA Member
$875 Community Member/List
IN
After 9 May
• Introduction to Industrial Automation
Security and the ANSI/ISA-62443
Standards (IC32C)
ST
$675 ISA Member
$825 Community Member/List
• Industrial Wireless Systems (IC85C)
TE
Early Bird
Make the
most of your trip to
exciting, fun Dayton!
Conference Registration:
T
Where: Dayton, Ohio, USA
EN
When: 24–26 May 2016
Attend ISA’s 62nd International Instrumentation
Symposium (IIS), and participate in one of two
valuable technical training opportunities:
&
S
IC S
ST TIC
NO OS
AG N
DI ROG
P
The ISA IIS Symposium is sponsored jointly by the Aerospace Industries,
Test Measurement, and Process Measurement and Controls Divisions of ISA.
IIS is recognized internationally as the outstanding forum for discussion
of new and innovative instrumentation techniques, development, and
applications. It will also incorporate MFPT’s focus on the practical application
of health management across the entire field of engineering.
M
EP30-5739-0116
Expand your
instrumentation
skills and knowledge.
E
TA AG
DA A N
M
The 62nd International Instrumentation Symposium (IIS) is partnering with
the Machinery Failure Prevention Technology (MFPT) Society to offer a
valuable combined event called the 62nd International Instrumentation
Symposium and MFPT 2016.
S GY
OR LO
NS NO
SE CH
TE
Bringing together the expertise,
perspectives, and strengths
of two premier industry
organizations!
International Society of Automation
67 T.W. Alexander Drive
P.O. Box 12277
Research Triangle Park, NC 27709
Conferences & Exhibits
Training date: 23 May 2016
S
EM G
ST RIN
Y
S EE
N
GI
EN
ISA 62nd International Instrumentation Symposium (IIS)
24–26 May 2016
Dayton, Ohio, USA
Enhance your know-how and expertise with an ISA training short course!
Industrial Wireless Systems
Maximize your learning experience
during IIS 2016 in Ohio!
Practical ISA technical training offered in conjunction with this event
ISA will be presenting two of its expert-led technical training course topics at
the 62nd International Instrumentation Symposium (IIS) on 23 May 2016, which
include:
• Industrial Wireless Systems (IC85C)
• Introduction to Industrial Automation Security and the
ISA/IEC 62443 Standards (IC32C)
Meet your continuing education requirements right here by choosing one of the
two courses to earn your PDHs and CEUs!
ISA Training: World-class subject matter expertise
ISA’s technical training courses are known and respected worldwide for their
unbiased, practical approach to technology application. For more than 65
years, ISA has met the real-world training needs of automation and control
professionals through flexible, customized training solutions. ISA courses, taught
by industry and subject matter experts across a wide range of disciplines and
fields, enable students to immediately apply their knowledge and skills to the
workplace.
• Describe today’s wireless offerings for industrial automation
• Identify the security needs of the IT department
• Explain how wireless applications utilizing different wireless technologies may
interplay at your plant
• Identify if a combination of schemes is needed in your plant
• Identify secure methods for linking multiple plants together
• And More...
You Will Cover:
• An Initial Examination of Numerous Wireless Applications
• Communication Fundamentals
• Numbers and Letters
•ISA100
• Network Designs and Topologies
• Advanced Concepts
To register or learn more, visit www.isa.org/2016/IC85C/IIS
or call +1 919-549-8411.
Instructor
Date: 23 May 2016
Course Registration*:
Time: 8:00 a.m. – 4:00 p.m.
Early Bird (Before 9 May 2016)
$570 ISA Member
$718 Community Member/List
$646 Affiliate Member
After 9 May 2016
$600 ISA Member
Space is limited,
so register early!
You Will Be Able To:
• ANSI/ISA-100.11a-2011: Wireless Systems for Industrial Automation—Process Control and
Related Applications
Course Details (each course)
CEUs (PDHs): 0.7 (7)
This course will cover the most relevant details associated with industrial wireless systems
with an emphasis towards how the various technological choices coexist, interoperate,
and interact with each other. Numerous examples of real-world deployments are covered
for facilities such as supervisory control and acquisition (SCADA) systems, petrochemical
plants, electrical power generation, and transmission systems. The operational differences posed to the wireless system’s performance by discrete manufacturing needs,
monitoring of devices, and even control systems are addressed.
Includes ISA Standards:
Taking an ISA training course will:
• Enhance on-the-job training
• Fill in missing knowledge and skill gaps
• Teach the How’s and Why’s
• Provide continuing education credits
• Expand professional networks
Location: Dayton Convention Center
22nd East 5th Street
Dayton, Ohio, USA 45402
Course No.: IC85C
$755 Community Member/List
$680 Affiliate Member
*Course registration is separate from and in addition to conference registration.
You can choose to register for training or the conference only, or for both.
Dr. Peter Fuhr has been working in the areas of wireless communications,
sensors, and photonics for longer than he cares to admit. He was among the
earliest group of individuals to embed sensors into various civil structures, and
helped pioneer the integration of sensors and actuators onto the comm channel
that used to be called “The Information Superhighway.” Dr. Fuhr has published
and presented over 500 technical articles and holds numerous patents. He serves on several
industrial, governmental, and corporate advisory boards for companies in the wireless, photonic,
and nano technological areas. He is a Senior Member of the IEEE, has served as an ISA course
developer, and instructor for many years. Dr. Fuhr has received many awards throughout his career including the Presidential Award for Excellence in Research. Dr. Fuhr is active in the ISA100
Wireless Committee.
Introduction to Industrial Automation Security
and the ISA/IEC 62443 Standards
Course No.: IC32C
This course teaches you the basics of the ISA/IEC 62443 standards and how these can be applied
in the typical factory or plant. In this seminar, you will be introduced to the terminology, concepts,
and models, as well as the element of creating a cybersecurity management system will be explained along with how these should be applied to industrial automation and control systems.
You Will Be Able To:
• Define the terminology, concepts, and models for electronic security in the industrial automation
and control systems environment
• Define the elements of the ANSI/ISA-62443-2-1 (ANSI/ISA-99.02.01-2009) Security for Industrial
Automation and Control Systems: Establishing an Industrial Automation and Control Systems
Security Program
• Define the core concepts of risk and vulnerability analysis methodologies
• And More…
You Will Cover:
• Understanding the Current Industrial Security Environment
• How IT and the Plant Floor are Different and How They are the Same
• Current Security Standards and Practices
• Creating A Security Program
• And More…
Includes ISA Standards:
• ANSI/ISA-62443-1-1 (ANSI/ISA-99.00.01-2007) Security for Industrial Automation and Control
Systems Part 1: Terminology, Concepts & Models
• ANSI/ISA-62443-2-1 (ANSI/ISA-99.02.01-2009) Security for Industrial Automation and Control
Systems: Establishing an Industrial Automation and Control Systems Security Program
•ANSI/ISA-62443-3-3 Security for Industrial Automation and Control Systems: System Security
Requirements and Security Levels
To register or learn more, visit www.isa.org/2016/IC32C/IIS
or call +1 919-549-8411.
Instructor
John Cusimano is an industrial control system cyber security and functional safety
expert with more than twenty years of experience.
John has performed or supervised numerous control system cybersecurity vulnerability and cyber risk assessments in the Oil & Gas, Pipeline, Chemical, Water/Wastewater, Pharmaceutical and Power industries per NIST, ISA/IEC 62443 and NERC CIP standards. He
has also overseen and participated in the security testing and certification of several control and
safety systems per the ISA Secure and Achilles security certification programs.
A leader in the development of ICS cybersecurity standards and best practices, John is Chairman of
ISA 99 WG4 TG2 Zones & Conduits committee and co-chair of ISA 99 WG4 TG6 Product Development committee. His is also the lead developer and instructor for the ISA IC32 series of courses.
Prior to joining aeSolutions, John was director of cybersecurity services for exida and held several
process automation and safety related positions with Siemens’ and Moore Products Co. John
started his career at Eastman Kodak Company, where he implemented and managed automation
projects. John has a B.S. degree in Electrical & Computer Engineering from Clarkson University and
holds CFSE, CISSP and GICSP certifications.