View 1
STAR integration volume
SIDE VIEW: DETECTOR POSITIONING
eventual TOF tray size
STAR TOFrp Tray
MRPC
.768" [1.95cm]
3.307" [8.4cm]
3.701" [9.4cm]
1.600"
1.600"
1.550"
.200"
Interior edge of Tray Bottom Assy
View 2
first TFEEp plate @ interior edge of Tray Bottom Assy
Big Holes
Blind holes for PEM studs
TFEEp
W. J. Llope, [email protected], 713-348-4741
TFEEp Hole Pattern
[4.06cm]
[4.06cm]
[3.94cm]
[0.51cm]
1.600" [4.06cm]
1.600" [4.06cm]
1.550" [3.94cm]
.200" [0.51cm]
Parts:
1. One (1) Tray Top Assy (Views 2, 3, 4, & 5)
0.090" 5052 H32 Aluminum Sheet Stock
TOFrp TOP ASSY: TOP VIEW
.200" [0.51cm]
"Shoebox" Shaped Top
0.090 5052 H32 Aluminum Sheet Stock
welded corners
1.750" [4.45cm] .400" [1.02cm]
2.000" [5.08cm]
1.000" [2.54cm]
A
1.750" [4.45cm]
8.200" [20.83cm]
View A
6.500" [16.51cm]
3. Two (2) Tray Feet (Views 6 & B)
0.090" 5052 H32 Aluminum Sheet Stock
welded to Bottom Assy as in View B.
1.750" [4.45cm]
2× R.03 Max
1.750" [4.45cm] .400" [1.02cm]
8.680" [22.05cm]
8.500" [21.59cm]
tolerance +0.010 -0.000
2. One (1) Tray Bottom Assy (Views 6 & 7)
0.050" 5052 H32 Aluminum Sheet Stock
Notes:
1. Parts are to be degreased and wrapped in plastic.
2. PEM nuts and studs to be cleaned before mounting in Top Assy.
3. Top Assy must fit onto Bottom Assy smoothly & without force.
.200" [0.51cm]
.600" [1.52cm]
9.900" [25.15cm]
height of flat sides
of Top Assy...
Spacing between
TFEEp boards:
1.000" [2.54cm]
.250" [0.64cm]
.250" [0.64cm]
.250" [0.64cm]
.750" [1.91cm]
1.250" [3.18cm]
2.250" [5.72cm]
2.750" [6.99cm]
A
(total height of Top Assy
includes bend radii...)
8.500" [21.59cm]
8.730" [22.17cm]
Blind holes for PEM studs
92.000" [233.68cm]
tolerance +0.010 -0.000
TTST and Jalepeno Mounting Detail
92.180" [234.14cm]
TFEEp
View 3
hole posns wrt
inner edge of
Top Assy:
84.500" [214.63cm]
45.000" [114.3cm]
MIN .690" [1.75cm]
TOFrp TOP ASSY: SIDE VIEW
2.000" [5.08cm]
TFEEp
TTST
TFEEp
TTST
TFEEp
TTST
TTST
TFEEp
TFEEp
X
TTST
68.500" [173.99cm]
7.500" [19.05cm]
24.500" [62.23cm]
8.400" [21.34cm]
2.000" [5.08cm]
.600" [1.52cm]
.090" [0.23cm]
.050" [0.13cm]
X
6.000" [15.24cm]
.750" [1.91cm]
Blind Holes for PEM Model F-632-1, "Flush Nuts", Stainless Steel
Blind Hole Diameter: 0.213" +0.003" -0.000"
to accept 6-32 screws inserted from inside the Bottom Assy...
3.625" [9.21cm]
6.900" [17.53cm]
TTST
TTST
TTST
TTST
7.500" [19.05cm]
6.400" [16.26cm]
TTST
View 4
TOFrp TOP ASSY: TOP VIEW, BIG HOLE POSITIONING
9.025" [22.92cm]
Blind Holes for PEM Model FHLS-632-8, "Studs for close-to-edge mounting", Stainless Steel
Blind Hole Diameter: 0.137 +0.003 -0.000
.750" [1.91cm]
8.000" [20.32cm]
29.500" [74.93cm]
2.000" [5.08cm]
2× R.25 Max
1.000" [2.54cm]
jalepeno
TCD int mezz
7.400" [18.8cm]
7.325" [18.61cm]
7.400" [18.8cm]
.250" [0.64cm]
.250" [0.64cm]
.488" [1.24cm]
10.638" [27.02cm]
1.000" [2.54cm]
1.850" [4.7cm]
8.500" [21.59cm]
20.788" [52.8cm]
8.500" [21.59cm]
1.000" [2.54cm]
30.938" [78.58cm]
41.588" [105.63cm]
52.737" [133.95cm]
64.887" [164.81cm]
Cooling Loop Detail
77.537" [196.95cm]
88.5" [224.83cm]
View 5
TOFrp TOP ASSY: TOP VIEW, BLIND HOLE POSITIONING FOR PEM STUDS
.350" [0.89cm]
(length from tubing center to ends)
Blind Holes for PEM Model FHLS-632-8, "Studs for close-to-edge mounting", Stainless Steel
Blind Hole Diameter: 0.137 +0.003 -0.000
7.800" [19.81cm]
Bend Radius 2" MAX
Al fittings modified
3/8" NPT drilled out
to 0.500" ID, 0.05" depth
8.750" [22.22cm]
Center-to-Center Spacing: 8.725" (8.700" MIN 8.750" MAX)
.350" [0.89cm]
.250" [0.64cm]
9.750" [24.77cm]
10.400" [26.42cm]
19.900" [50.55cm]
20.550" [52.2cm]
30.050" [76.33cm]
30.700" [77.98cm]
40.200" [102.11cm]
41.350" [105.03cm]
50.850" [129.16cm]
52.500" [133.35cm]
Cooling Loop Location Detail
62.000" [157.48cm]
64.650" [164.21cm]
R 82.642" [R 209.91cm]
74.150" [188.34cm]
77.300" [196.34cm]
.440" [1.12cm]
86.800" [220.47cm]
.162" [0.41cm]
View 6
1" [2.54cm]
Engineered Fasteners, C2980A-8
.188" [0.48cm]
hole 0.173"
1" [2.54cm]
TOFrp BOTTOM ASSY: TOP VIEW
.032" [0.08cm]
1" [2.54cm]
Tray Feet (View B)
1" [2.54cm] - 8" [20.3cm]
.430" [1.09cm]
1" [2.54cm]
B
View B
1.500" [3.81cm]
1.250" [3.18cm]
2.900" [7.37cm]
1.250" [3.18cm]
4.440" [11.28cm]
8.400" [21.34cm]
91.900" [233.43cm]
92.000" [233.68cm]
1" [2.54cm]
.430" [1.09cm]
1" [2.54cm]
1" [2.54cm]
B
.750" [1.91cm]
.365" [0.93cm]
tolerance +/- 0.010" [0.03cm]
2.000" [5.08cm]
24.500" [62.23cm]
TOFrp BOTTOM ASSY: SIDE VIEW
B
.311" [0.79cm]
hole 0.204"
.031" [0.08cm]
.218" [0.55cm]
.592" [1.5cm]
1.200" [3.05cm]
1.000" [2.54cm]
TTST Detail
8.500" [21.59cm]
tolerance +0.000 -0.010
.625" [1.59cm]
.625" [1.59cm]
.300" [0.76cm]
3.000" [7.62cm]
9.900" [25.15cm]
.275" [0.7cm]
.480" [1.22cm]
.508" [1.29cm]
R .227" [R 0.58cm]
R .227" [R 0.58cm]
1.750" [4.45cm]
.430" [1.09cm]
92.000" [233.68cm]
B
.430" [1.09cm]
TTST
2.275" [5.78cm]
.250" [0.64cm]
.200" [0.51cm]
Tray Feet
3.510" [8.92cm]
3.300" [8.38cm]
3.200" [8.13cm]
3.093" [7.86cm]
.340" [0.86cm]
Umpco, MS9351-05
.750" [1.91cm]
84.500" [214.63cm]
45.000" [114.3cm]
.592" [1.5cm]
R .078" [R 0.2cm]
R .078" [R 0.2cm]
1.600" [4.06cm]
TOFrp BOTTOM ASSY: TOP VIEW
68.500" [173.99cm]
.220" [0.56cm]
.592" [1.5cm]
HV Connector Holes
.850" [2.16cm]
3.000" [7.62cm]
hole posns wrt
outer edge of
Bottom Assy:
.311" [0.79cm]
hole 0.204"
Tray Feet: End View
Material: 5052 H32 Aluminum Sheet Stock
thickness = 0.090", length = 91"
1" [2.54cm]
View 7
.281" [0.71cm]
1.500" [3.81cm]
1.600" [4.06cm]
1" [2.54cm] - 8" [20.3cm]
.031" [0.08cm]
.282" [0.72cm]
.343" [0.87cm]
Umpco, MS9353-07
1.600" [4.06cm]
8.500" [21.59cm]
.187" [0.47cm]
.470" [1.19cm]
.122" [0.31cm]
9.500" [24.13cm]
.200" [0.51cm]