LIVINGSTONE INTERNATIONAL PTY LTD 100% PROUDLY AUSTRALIAN OWNED • SINCE 1984 Head Office: 106 - 116 Epsom Road, Phone: 1300 780 078 Fax: (02) 9313 6444 ABN: 66 052 001 144 International Phone: +61 2 9313 6111 Email: [email protected] International Fax: +61 2 9313 6444 Website: www.livingstone.com.au MATERIAL SAFETY DATA SHEET Rosebery NSW 2018 AUSTRALIA MATERIAL SAFETY DATA SHEET Version: PAGE 1 OF1.1 4 Revision date:DWWJ0010 29-Nov-2012 PRODUCT CODE: 1 of 4 VALID TILL: Page 27/07/2019 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION Material Name: Water for injection, USP Trade Name: Chemical Family: Intended Use: Not established Not applicable Pharmaceutical product 2. HAZARDS IDENTIFICATION Appearance: Clear, colorless liquid Statement of Hazard: Non-hazardous in accordance with international standards for workplace safety. EU Indication of danger: Not classified Australian Hazard Classification (NOHSC): Non-Hazardous Substance. Non-Dangerous Goods. Note: This document has been prepared in accordance with standards for workplace safety, which require the inclusion of all known hazards of the active substance or its intermediates regardless of the potential risk. The precautionary statements and warnings included may not apply in all cases. Your needs may vary depending upon the potential for exposure in your workplace. 3. COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Water for injection CAS Number 7732-18-5 EU EINECS/ELINCS List EU Classification 231-791-2 Not Listed % 100 MATERIAL DATA Ingredient(s) indicated SAFETY as hazardous haveSHEET been assessed under standards for workplace safety. Material Name: Water for injection, USP Page 2 of 4 Revision date: 29-Nov-2012 Version: 1.1 4. FIRST AID MEASURES _______________________________________________________________________________________________________ Additional Information: Eye Contact: Due to the nature of this material first aid is not normally required. Skin Contact: Due to the nature of this material first aid is not normally required. Ingestion: Due to the nature of this material first aid is not normally required. Inhalation: Not an expected route of exposure. 5. FIRE FIGHTING MEASURES Extinguishing Media: As for primary cause of fire. Hazardous Combustion Products: Not applicable Fire Fighting Procedures: Not applicable The content of this MSDSHazards: is to the best of Livingstone knowledge of the product and how to safely handle it in the workplace based on NotInternational’s applicable Fire / Explosion third party information. Livingstone International expressly disclaims that this MSDS document is a representation or guarantee of full and complete information for the product. All users should read the MSDS and consider the information in the context of how the selected product will be handled 6. ACCIDENTAL RELEASE MEASURES and used in the workplace including its use in independent expert. The responsibility for products sold by Livingstone International is subject to its standard Terms and Conditions of Sale (Australia, New Zealand). Health and Safety Precautions: Not applicable LIVINGSTONE INTERNATIONAL PTY LTD MATERIAL SAFETY DATA 100% PROUDLY AUSTRALIAN OWNED • SHEET SINCE 1984 ABN: 66 052 001 144 Material Name: Head Water for 106 injection, USP Page 2 of 4 Office: - 116 Epsom Road, Phone: 1300 780 078 International Phone: +61 2 9313 6111 Email: [email protected] Revision date: 29-Nov-2012 Version: 1.1 Rosebery NSW 2018 AUSTRALIA Fax: (02) 9313 6444 International Fax: +61 2 9313 6444 Website: www.livingstone.com.au _______________________________________________________________________________________________________ Skin Contact: MATERIAL SAFETY SHEET Due to the nature of this materialDATA first aid is not normally required. Ingestion: PRODUCT CODE: DWWJ0010 Inhalation: Due to the nature of this material first aid is not normally required. PAGEof2exposure. OF 4 Not an expected route VALID TILL: 27/07/2019 5. FIRE FIGHTING MEASURES Extinguishing Media: As for primary cause of fire. Hazardous Combustion Products: Not applicable Fire Fighting Procedures: Not applicable Fire / Explosion Hazards: Not applicable 6. ACCIDENTAL RELEASE MEASURES Health and Safety Precautions: Not applicable Measures for Cleaning / Collecting: Wipe up with a damp cloth and place in container for disposal. Measures for Environmental Protections: None Additional Consideration for Large Spills: None Additional Information: No special measures are required. 7. HANDLING AND STORAGE General Handling: Storage Conditions: No special handling requirements for normal use of this material. Store as directed by product packaging. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION No Occupational Exposure Limit (OEL) or Short Term Exposure Limit (STEL) has been identified. Engineering Controls: Environmental Exposure Controls: Personal Protective Equipment: Hands: Eyes: Skin: Respiratory protection: Engineering controls should be used as the primary means to control exposures. Refer to specific Member State legislation for requirements under Community environmental legislation. Refer to applicable national standards and regulations in the selection and use of personal protective equipment (PPE). Not required for the normal use of this product. Not required under normal conditions of use. Not required for the normal use of this product. None required under normal conditions of use. _______________________________________________________________________________________________________ EX02902 The content of this MSDS is to the best of Livingstone International’s knowledge of the product and how to safely handle it in the workplace based on third party information. Livingstone International expressly disclaims that this MSDS document is a representation or guarantee of full and complete information for the product. All users should read the MSDS and consider the information in the context of how the selected product will be handled and used in the workplace including its use in independent expert. The responsibility for products sold by Livingstone International is subject to its standard Terms and Conditions of Sale (Australia, New Zealand). LIVINGSTONE INTERNATIONAL PTY LTD 100% PROUDLY AUSTRALIAN OWNED • SINCE 1984 Head Office: 106 - 116 Epsom Road, Phone: 1300 780 078 Rosebery NSW 2018 AUSTRALIA Fax: (02) 9313 6444 ABN: 66 052 001 144 International Phone: +61 2 9313 6111 Email: [email protected] International Fax: +61 2 9313 6444 Website: www.livingstone.com.au MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Material Name: Water for injection, USP Page 3 of 4 Revision date: 29-Nov-2012 Version: 1.1 _______________________________________________________________________________________________________ PRODUCT CODE: DWWJ0010 PAGE 3 OF 4 VALID TILL: 27/07/2019 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State: Odor: Molecular Weight: Liquid None 18.02 pH: Melting/Freezing Point (°C): Boiling Point (°C): 7 0 100 Color: Molecular Formula: Colorless H2O 10. STABILITY AND REACTIVITY Chemical Stability: Conditions to Avoid: Incompatible Materials: Stable None None 11. TOXICOLOGICAL INFORMATION No information available. 12. ECOLOGICAL INFORMATION Environmental Overview: No harmful effects to aquatic organisms are expected. 13. DISPOSAL CONSIDERATIONS Waste Treatment Methods: Dispose of waste in accordance with all applicable laws and regulations. Member State specific and Community specific provisions must be considered. Considering the relevant known environmental and human health hazards of the material, review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure and environmental release. It is recommended that waste minimization be practiced. The best available technology should be utilized to prevent environmental releases. This may include destructive techniques for waste and wastewater. 14. TRANSPORT INFORMATION The following refers to all modes of transportation unless specified below. Not regulated for transport under USDOT, EUADR, IATA, or IMDG regulations. 15. REGULATORY INFORMATION The content of this MSDS is to the best ofNot Livingstone classifiedInternational’s knowledge of the product and how to safely handle it in the workplace based on EU Indication of danger: third party information. Livingstone International expressly disclaims that this MSDS document is a representation or guarantee of full and complete _______________________________________________________________________________________________________ information for the product. All users should read the MSDS and consider the information in the context of how the selected product will be handled EX02902 and used in the workplace including its use in independent expert. The responsibility for products sold by Livingstone International is subject to its standard Terms and Conditions of Sale (Australia, New Zealand). specific and Community specific provisions must be considered. Considering the relevant known environmental and human health hazards of the material, review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure and environmental release. It is recommended that waste minimization ABN: 66environmental 052 001 144 PROUDLYbeAUSTRALIAN OWNED • SINCE practiced. The best available technology should 1984 be utilized to prevent releases. This may include destructive techniques for waste and wastewater. LIVINGSTONE INTERNATIONAL PTY LTD 100% Head Office: 106 - 116 Epsom Road, Phone: 1300 780 078 Rosebery NSW 2018 AUSTRALIA 14. TRANSPORT INFORMATION Fax: (02) 9313 6444 International Phone: +61 2 9313 6111 Email: [email protected] International Fax: +61 2 9313 6444 Website: www.livingstone.com.au The following refers to all modes of transportation unless specified below. MATERIAL SAFETY DATA SHEET Not regulated for transport under USDOT, EUADR, IATA, or IMDG regulations. MATERIAL SAFETY DATA SHEET PRODUCT CODE: DWWJ0010 PAGE 4 OF 4 VALID TILL: Page 27/07/2019 4 of 4 Material Name: Water for injection, USP Version: 1.1 Revision date: 29-Nov-2012 _______________________________________________________________________________________________________ 15. REGULATORY INFORMATION 15. REGULATORY INFORMATION Not classified EU Indication of danger: _______________________________________________________________________________________________________ OSHA Label: Non-hazardous in accordance with international standards for workplace safety. EX02902 Canada - WHMIS: Classifications WHMIS hazard class: None required Water for injection Inventory - United States TSCA - Sect. 8(b) Australia (AICS): REACH - Annex IV - Exemptions from the obligations of Register: EU EINECS/ELINCS List Present Present Present 231-791-2 16. OTHER INFORMATION No other information available. END OF MSDS The content of this MSDS is to the best of Livingstone International’s knowledge of the product and how to safely handle it in the workplace based on third party information. Livingstone International expressly disclaims that this MSDS document is a representation or guarantee of full and complete information for the product. All users should read the MSDS and consider the information in the context of how the selected product will be handled and used in the workplace including its use in independent expert. The responsibility for products sold by Livingstone International is subject to its standard Terms and Conditions of Sale (Australia, New Zealand). _______________________________________________________________________________________________________ EX02902
© Copyright 2024 Paperzz