Back to the Nanoform 700 ultra Product Page
Technical Product Specifications
Nanoform® 700 ultra
Machine Base and Control
Machine Base
Machine Type
Vibration Isolation
Control System
Operating System
Programming Resolution
File Transfer
Performance
Description
Sealed natural granite base provides exceptional long term machine tool stability
Ultra precision, two, three or four axes CNC contouring machine
Self leveling dual chamber pneumatic isolation system
UPx™ Control System with optional Adaptive Control Technology
QNX real time operating system
0.01nm linear / 0.0000001˚ rotary
USB, CD-ROM, Ethernet
Surface Finish (Ra) < 1.0nm, Form Accuracy (P-V) < 0.125μm
Linear Oil Hydrostatic Slideways
Type
Travel
Maximum Feedrate
Drive System
Position Feedback Resolution
X-axis Straightness
Z-axis Straightness
Vertical Straightness
Description
Hydrostatic oil bearing slideways with symmetrical linear motor placement
X axis: 350 mm (13.8 ") Z axis: 300 mm (11.8 ")
4000 mm/min. (157 "/min.)
AC Linear Motor
32 picometers (0.032 nanometers)
Horizontal: 0.30μm (12μ”) full travel 0.05μm/25mm (2μ”)
Horizontal: 0.40μm (16μ”) full travel 0.05μm/25mm (2μ”)
X: 0.75μm (30μ”) Z: 0.75μm (30μ")
Workholding Air Bearing Spindle
Spindle Air Bearing Type
Materials
Standard Swing capacity
Motor
Ultimate Load capacity
Axial Stiffness
Radial Stiffness
Motion Accuracy
Thermal Control
C-axis Feedback Resolution
C-axis Positioning Accuracy
C-axis Max Speed
Workholding Spindle Max Speed
High Performance HS150 Spindle
Slot type thrust bearing
Steel shaft / Bronze journal
700 mm (27.5") diameter
350 mm (13.7") over optional B Axis tabletop
Integral brushless motor
136 Kg (300 lbs) @100 PSI
230 N/micron (1,314,000 lbs./inch)
130 N/micron (743,600 lbs./inch)
Axial/Radial ≤ 15 nm (0.6 micro inches)
Liquid cooled chiller +/- 0.1C Accuracy
0.010 arc-sec 16,200 line encoder
+/- 1 arc-sec
1,500 RPM
10,000 RPM
Rotary B-axis
Type
Material
Tabletop size
Maximum Speed
Motor Torque
Position Feedback Resolution
Radial Error Motion
Axial Error Motion
Coning Error
Radial Stiffness
Axial Stiffness
Moment Stiffness
HydroRound Rotary B-axis
Bi-conical, self compensated, patented oil hydrostatic bearing with integral motor and integral encoder
High-alloy steel
380 mm (15")
10 RPM
72 inch-lbs. 8.1N/μm
0.003 arc-sec
0.10 µ (4 micro in.) @ 1" above table and can be improved with optional error mapping
0.10 µ (4 micro in.)
1.0 nm/mm (1.0 µ/in.)
525 N/µm (3,000,000 lbs/in.)
875 N/µm (5,000,000 lbs/in.)
17 N-m/µrad (150 inch-lbs/µrad)
High Speed Milling / Grinding Spindles
Air Supply Pressure
Air Consumption
Radial Load Capacity
Axial Stiffness
Radial Stiffness
Axial Error Motion
Radial Error Motion
Maximum Speed
SP75FF Spindle
690 KPA (100 PSI)
2.8 l/s (6.0 SCFM)
32 kg (70 lbs) Ultimate Load Capacity
70N/μm (400,000 lbs/in.)
22N/μm (125,000 lbs/in.)
< 50 nm (2 micro in.)
< 50 nm (2 micro in.)
15,000 RPM
Facility Requirements
Power
Compressed Air Supply
Machine Size and Weight
Nanoform® 700 ultra
208 +/-10% or 230 +/-10% VAC - 3.0 KVA 1 phase - 50/60Hz
Typical: 12 SCFM @ 100 PSIG
1437mm x 1930mm x 2043mm (57" x 76" x 80")
Heavy Duty HD-160 Spindle
Slot type thrust bearing
Steel shaft / Bronze journal
700 mm (27.5") diameter
350 mm (13.7") over optional B Axis tabletop
Integral brushless motor
170 Kg (375 lbs) @100 PSI
350 N/μm (2,000,000 lbs./in.)
175 N/μm (1,000,000 lbs./in.)
Axial/Radial ≤ 50nm (2μ”)
Liquid cooled chiller +/- 0.1C Accuracy
0.026 arc-sec
+/- 2 arc-sec
3,000 RPM
5,000 RPM
Levicron High Speed Milling Spindle
610 KPA (88 PSI)
1.1 l/s (2.4 SCFM)
29 Kg (65 lbs) ultimate
50 N/µm (285,000 lbs/inch)
35 N/µm (200,000 lbs/inch)
< 30 nm (1.2 micro in.)
< 30 nm (1.2 micro in.)
80,000 RPM (stiffness increases 50% with 60k RPM model)
AMETEK® Precitech, Inc.
Global Manufacturer of Innovative Ultra Precision Machining Solutions
44 Blackbrook Road • Keene, NH 03431 USA • Phone: 603-357-2511
[email protected] • www.precitech.com
•
Fax: 603-358-6174
Nanoform 700 Ultra 4/2014