Maintenance
Weekly
Using the Pallmann Hardwood Floor Dusting Pad, lightly dust the
floor to remove large debris. A vacuum may also be used for large
areas. The Pallmann Hardwood Floor Cleaner may be used with
the Pallmann Microfiber Pad on a weekly basis or as needed to
thoroughly clean your floors. Clean stubborn spots, spills, and
shoe marks by spraying the Hardwood Floor Cleaner directly on
the areas.
Monthly
Inspect protector pads on furniture and ensure that all walk off
mats are in proper locations. Also, visually inspect the wood
floor for traffic patterns that may be present. If a traffic pattern is
noticeable, it may be time to consult a wood flooring professional
to discuss recoating your wood floors.
Yearly
Contact a professional hardwood flooring contractor to deep
clean your wood floors using the Pallmann Clean Strong product
once a year. Over time, accumulation of every day residues such
as oils, grease, and dirt will occur on the hardwood floor. These
residues will act as an abrasive which may cause premature finish
wear. The Pallmann Clean Strong product is a professional
product that should only be used by a professional hardwood
flooring contractor.
Several Years Later
A new coat of finish may need to be applied to your wood floor
several years after the initial application. This will ensure that you
do not wear down the current finish to bare wood, causing expensive
sanding procedures. Compared to re-sanding, re-coating is
an inexpensive procedure that often can be completed in one
day with little to no dust in the home. We recommend using our
dustless recoating products—Pall-X Bond with our Pall-X 96 or
Pall-X 98 waterborne finishes.
PALLMANN | A Brand of UFLOOR Systems Inc.
14509 E. 33rd Place, Unit G | Aurora, CO 80011
Phone: 720.374.4810 | Fax: 720.374.2113
[email protected] | pallmann.us
Who is Pallmann?
Choosing the Perfect Sealer
Choosing the Perfect Finish
Pall-X 98 Finish
Since 1900 Pallmann has been using the latest technology
available in the wood floor finish market. Pallmann is
consistently striving to produce the next generation of
waterborne finishes that meet or exceed environmental
standards, in addition to providing the protection
homeowners demand for their wood floors. After testing
these standards, we then take the manufacturing process
one step further. We combine our German Engineering
with American Technical Expertise to give you,
the homeowner, and your contractor the very best
waterborne finish system for your project.
Pall-X Color Sealer
Pall-X 98 is a two component waterborne hardwood floor finish with
Pall-X Color is a single component waterborne sealer that seals raw or
commercial and high traffic residential applications. Pall-X 98 is a clear
statined wood in addition to adding a layer of protection to your floor.
Pall-X Color’s unique formula reacts with most wood species to bring
out the warm rich tones of the wood. This sealer is recommended to
enhance the vibrancy and depth of the stain color. (Note: do not use
over white or pastel stains.)
unmatched durability and chemical resistance. This finish is ideal for
finish that allows the natural beauty of the floor to shine through the finish.
It is available in three popular sheens: semi-gloss, satin, and matte.
VOC compliant and
100% fully cured
in 4 days allows
homeowners to become
115 Years of Quality Innovation
active on their floor
quicker than when
choosing traditional oil
By choosing Pallmann to protect your wood floors, you can
Pall-X 325 Sealer
be confident that your new finish will look great for years to
Pall-X 325 is a single component waterborne sealer that seals raw or
come. Pallmann’s references include providing finishes for
stained wood in addition to adding a layer of protection to your floor.
projects ranging from grand ballrooms in the French Alps
Pall-X 325 is ideal when a clear, light tone appearance is desired. This
to local coffee shops in Colorado. Our finishes are shipped
sealer is recommended when a white or pastel stain is used prior to
from our facility in Wurzburg, Germany, and are equipped
application of the final coats of finish.
modified polyurethanes.
Pall-X 96 Finish
with 115 years of history and expertise, giving you the
assurance and confidence to trust Pallmann on your wood
Pall-X 96 is a single component waterborne hardwood floor finish designed
flooring project.
for residential or light commercial applications. This highly durable single
component finish has excellent wear, chemical resistance, and the capability
Pall-X Color
Pall-X Color
to be suitable for many wood flooring projects. Pall-X 96 is a clear finish that
allows the natural beauty of the floor to shine through the finish.
It is available in four
popular sheens: gloss,
semi-gloss, satin, and
matte. VOC compliant
and 100% fully cured
in 7-10 days allows
homeowners to become
active on their floor
Front cover:
Savannah Neighborhood Clubhouse in
Dallas, Texas featuring Pall-X 98 finish.
Pall-X 325
Pall-X 325
Red Oak
White Oak
quicker than when
choosing traditional oil
modified polyurethanes.