™
iTAG - HTS High Temperature Printable Sleeve
225°C Temperature Rated Printable Sleeve
Application Method - Heatshrink
High temperature rated, flexible, highly flame retardant, polyvinylidene fluoride printable sleeves. Excellent
chemical and mechanical properties with low friction surface. This sleeving is suitable in applications where
extreme temperatures and exposure to harsh chemicals can be found. Markers are supplied in ladder form on a
roll, having been conditioned for printing with our range of iTAG printers and qualified ribbons.
Features and Benefits
Meets SAE-AMS-DTL 23053 Specification
Print on liner enabled
Flame Retardant Meeting UL224 VW-1
Easy Pick Application
Black stripe for easy detection
Print performance to military requirements
12.5mm, 25mm, 50mm lengths
Perforation between each marker for easy tear
Colours - White
Technical Information
Thermal Properties
Typical Value
Test Method
Storage
Continuous Operating Temperature
-55°C to +225°C
Store in original packaging.
Shrinking starts at
+120°C
Recommended temperature at
Min. Shrink Temperature for Full Recovery
+150°C
+10°C to 25°C at 45-55% R.H.
Colour Stability (200°C x 24h)
Pass
SAE-AMS-DTL-23053
Use within 3 years from date of manufacture.
Low Temperature Flexibility(-55°Cx4h)
Pass no cracking
SAE-AMS-DTL-23053
Corrosion of bare copper (175°Cx16h)
Pass no corrosion
SAE-AMS-DTL-23053
Heat Ageing (225°Cx168h)
Pass no cracking
SAE-AMS-DTL-23053
Heat Shock (275°C x 4h)
No crack. flowing or dripping
SAE-AMS-DTL-23053
Physical Properties
Typical Value
Colours
Longitudinal Change
+0%, - 10%
Standard: White
Specific Gravity
1.9g/cm3 max (1.73g/cm3Typical )
Tensile Strength
24 MPa Min.
ASTM D 412
Elongation at Break
200% Min
ASTM D 412
Chemical Properties
Typical Value
Flammability
Water Absorption
VW-1
0.10% max.
Printer and Ribbon Recommended
Itag printer 300 Dpi
STP-A4+M-300-S-NC-S
Ribbon
TTR-110-300-BK-510
SAE-AMS-DTL-23053
Print Performance White
Specifications:
ADHERENCE:
Meet the requirements SAE-AS81531-1998 Clause 4.6.2
FLUID RESISTANCE:
Meet the requirements of MIL202 Method 215J
Using the TTR-110-300-BK-510 ribbon
Specifications:
Meets SAE-AMS-DTL-23053/18
UL224 VW-1
www.siegrist-orel.co.uk
UL 224
ASTM D 570
Fluid Resistance (after immersion 23°C x24h)
SAE-AMS-DTL-23053
Tensile Strength
13.9 MPa Min.
Elongation
100% Min
Dielectric Strength
15.7 KV/mm Min.
NASA SP-R-0022
Vaccum Outgasing
TML (Total Mass Loss)
1% Max
CVCM ( Collected Volatile Condens. Material
0.1% Max
Electrical Properties
Typical Value
Voltage Rating
N/A
Volume Resistivity
10 Ohm-cm Min.
ASTM D 876
Dielectric Strength
20KV/mm Min.
ASTM D 2671
12
Siegrist-Orel Limited Hornet Close
t : +44 (0) 1843 865241
Pysons Road Industrial Estate
f : +44 (0) 1843 867180
Broadstairs Kent CT10 2LQ
e : [email protected]
identification excellence recognised worldwide
™
Registered in England No. 412829
™
Itag - HTS High Temperature Marker Sleeve
Ordering Information Example
HTS-024-250-WE-S-3X
Shrink Ratio
Pack Size
Colour
Length mm
Bore size mm
Product reference
Ordering Information
Order Code
Nominal
Diameter
Supplied (D)
Nominal
Sleeve Length
Diameter
Recovered (d)
Markers Across Markers/Box
2.4
0.8
12.5
4
4000
HTS-024-125-WE-S-3X
2.4
0.8
25
2
2000
HTS-024-250-WE-S-3X
2.4
0.8
50
1
1000
HTS-024-500-WE-S-3X
3.2
1.6
12.5
4
4000
HTS-032-125-WE-S-2X
3.2
1.6
25
2
2000
HTS-032-250-WE-S-2X
3.2
1.6
50
1
1000
HTS-032-500-WE-S-2X
4.8
2.4
12.5
4
4000
HTS-048-125-WE-S-2X
4.8
2.4
25
2
2000
HTS-048-250-WE-S-2X
4.8
2.4
50
1
1000
HTS-048-500-WE-S-2X
6.4
3.2
12.5
4
4000
HTS-064-125-WE-S-2X
6.4
3.2
25
2
2000
HTS-064-250-WE-S-2X
6.4
3.2
50
1
1000
HTS-064-500-WE-S-2X
9.5
4.8
12.5
4
4000
HTS-095-125-WE-S-2X
9.5
4.8
25
2
2000
HTS-095-250-WE-S-2X
9.5
4.8
50
1
1000
HTS-095-500-WE-S-2X
12.7
6.4
12.5
4
2000
HTS-127-125-WE-S-2X
12.7
6.4
25
2
1000
HTS-127-250-WE-S-2X
12.7
6.4
50
1
500
HTS-127-500-WE-S-2X
19.1
9.5
12.5
4
2000
HTS-190-125-WE-S-2X
19.1
9.5
25
2
1000
HTS-190-250-WE-S-2X
19.1
9.5
50
1
500
HTS-190-500-WE-S-2X
25.4
12.7
12.5
4
1200
HPS-254-125-WE-S-2X
25.4
12.7
25
2
600
HPS-254-250-WE-S-2X
25.4
12.7
50
1
300
HPS-254-500-WE-S-2X
38.1
19.10
50
1
100
HPS-381-500-WE-S-3X
White
Siegrist-Orel Limited Hornet Close
t : +44 (0) 1843 865241
Pysons Road Industrial Estate
f : +44 (0) 1843 867180
Broadstairs Kent CT10 2LQ
e : [email protected]
©2003 Siegrist-Orel Limited. All rights reserved. The Siegrist-Orel logo is a registered trademark of Siegrist-Orel Limited. Other products and brand names may be trademarks of their respective owners.
The information on this datasheet is believed to be correct at the time of publishing. Specifications given in this publication are subject to change without notice.
www.siegrist-orel.co.uk
identification excellence recognised worldwide
TDS 1108
ISS. 3.0
Registered in England No. 412829