FlexAdaptor
Phase One FlexAdaptor
The flexible solution for digital
capture on your 4" x 5" camera
Phase One FlexAdaptor
The flexible solution for digital
capture on your 4" x 5" camera
Phase One®'s FlexAdaptor™ is a versatile
sliding adaptor that allows Phase One's
single shot direct digital imaging systems,
the LightPhase® and Phase One H 20,
to be mounted on various 4" x 5" view
cameras from Sinar, Horseman, Cambo,
Linhof, Toyo, and Arca Swiss.
Phase One FlexAdaptor for 4” x 5” cameras
Capture all types of images on your 4” x 5” camera
Captures all types of subjects in all types of light via the renowned Phase One
single shot technology. You will benefit from digital captures that surpass
the quality of film.
Once mounted, you can choose to shoot
only once like you normally would with
the LightPhase or Phase One H 20.
Or you can choose to take two or three
overlapping shots and stitch them together
by software. The final result is a high
resolution, panoramic image.
The FlexAdaptor supports the following
single shot systems: LightPhase
for Hasselblad, LightPhase for Mamiya
645AF, LightPhase for CONTAX 645,
and Phase One H 20.
Generate large files
Allows stitching of two or three image captures in order to generate panoramic
images at resolutions up to no less than 89 MB depending on the single shot
camera system in use.
Support for a broad range of 4” x 5” cameras
Enables easy mounting of any Phase One single shot camera back on 4" x 5"
view cameras from Sinar, Horseman, Cambo, Linhof, Toyo, and Arca Swiss.
Interchangeable inserts provide support for all LightPhase models as well as
Phase One H 20 with the same adaptor.
No change in focus
Comes with a specially made focusing screen that matches the focal plane
of the 4" x 5" view camera and with masks that indicate the 1-2-3 shot areas.
Full support for your 4” x 5” camera
Benefits from the functionality of the view camera in terms of image area,
supported lenses, for instance wide–angle lenses, as well as tilt, swing, and
shift functions.
The FlexAdaptor may be used with all
LightPhase and H 20 models. Simply replace
the interchangeable inserts.
FlexAdaptor with LightPhase
Phase One Stitching action
3 x 18 MB / 3000 x 2000 pixels
49 MB / 3000 x 5300 pixels
Phase One Stitching action
2 x 18 MB / 3000 x 2000 pixels
33 MB / 3000 x 3600 pixels
FlexAdaptor with Phase One H 20
Phase One Stitching action
2 x 48 MB / 4000 x 4000 pixels
Phase One FlexAdaptor
Fits the following 4" x 5"
view cameras:
Sinar
Horseman
Toyo
Linhof
Cambo
Arca Swiss
Dimensions:
Length:
Width:
Depth:
Depth:
Phase One
Roskildevej 39
DK-2000 Frederiksberg
Denmark
Tel +45 3646 0111
Fax +45 3646 0222
e-mail [email protected]
www.phaseone.com
307 mm
172 mm
50 mm without
viewfinder
97 mm with
viewfinder
Phase One
24 Woodbine Ave.
Northport, NY 11768
USA
Tel (631) 757-0400
Fax (631) 757-2217
e-mail [email protected]
www.phaseone.com
Phase One and LightPhase are registered trademarks of Phase One A/S.
All other brands or product names are trademarks or registered trademarks
of their respective holders. © 2001 Phase One A/S. All rights reserved.
The images were captured with Phase One H 20 and LightPhase. #86667000.
89 MB / 4000 x 7800 pixels
Phase One FlexAdaptor
and LightPhase
Phase One FlexAdaptor
and Phase One H 20
Supports LightPhases for:
Hasselblad
Mamiya RZ 67 Pro II
Mamiya 645 AF
CONTAX 645
Working modes:
One-shot mode
Two-shot mode
Working modes:
One-shot mode
Two-shot mode
Three-shot mode
Image file size:
One Image:
18 MB
Two-shot mode:
Approx. 33 MB
Three-shot mode: Approx. 49 MB
Image file size:
One Image:
Approx. 48 MB
Two-shot mode:
Approx. 89 MB