PHM-35
Polypropylene Homopolymer
MELT
-
35
DENSITY - 0.903
PHM-35 is a certified prime grade Polypropylene designed for injection molding of lightweight and thin-walled applications. PHM-35 processing temperature is 215o to 235oC
with mold at 20o to 50oC. PHM-35 complies with FDA regulation 21CFR 177.1520 and
most international regulations concerning the use of Polypropylene in contact with food.
Features:
•
•
•
•
•
•
•
Fast molding cycle
Good dimensional stability
Good processability
Good surface finish
High clarity
High flow
High tensile strength
Typical Applications:
• Long-flow path moldings
• Muti-cavity molds difficult to fill such as
caps, closures and lids
• Housewares articles
• Containers
• Large flat trays
PROPERTIES
ASTM
UNIT
VALUES
Density
D1505
g/cm3
0.903
Melt Flow Rate (230°C, 2.16kg)
D1238
g/10 min
35
PHYSICAL
MECHANICAL (INJECTION MOLD)
Tensile Strength (Yield)
D638
psi
4600
Tensile Elongation (Yield)
D638
%
12
Flexural Modulus - 1% Secant
D790
psi
170k
Notched Izod Impact (73oF)
D256
ft-lb/in
0.60
Rockwell Hardness (R-Scale)
D785
HDT Under Load (66psi, Unannealed, Injection
Molded)
D648
oF
199
Vicat Softening Temperature
D1525
oF
306
83
The technical information, suggested uses and applications presented are made without charge and are believed to be reliable; however, the Ravago Group* disclaims responsibility for reliance and results of use of this information.
THE RAVAGO GROUP DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, CONCERNING THE PRODUCT(S) DESCRIBED HEREINABOVE, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. The Ravago Group expressly disclaims any statements or suggestions as being inducement. All users should rely upon their own knowledge and testing in determining product suitability.