8
1.
2.
H
3.
4.
5.
6.
7.
G
8.
9.
7
6
4
5
SOD-372420 has 19" EIA standard rails,
19RU long.
New style poly filter and frame (see
reference drawing DR-00031)
Two 1/4-20x.625 studs attached to right
side, below side plate, for attaching
optional 110V receptacle(s).
Standard Knockouts in cabinet floor in
standard locations.
EMKA pad locking handle with 3 point
locking.
EMKA P/N: 1000-U32
Side plate shall attach to the cabinet
with #8-32 countersunk screws. PEM
nuts will be attached to the interior of
the cabinet.
There will be a 1/4"-20x.5" ground stud
1" from the back of the cabinet and 1"
from the right side, in the floor of the
enclosure.
Door will have upper and lower rod
guide BOTH 1.75" brackets in
dimensioned locations.
Fan ducting will be mounted to side
plate as standard part and location.
3
2
1
REVISIONS
DESCRIPTION
Initial Release per DR-00068
REV.
A
24
DATE
6/17/2011
H
Update per DR-00531 ADDED EMKA
HANDLE AND DOOR RODS, BRACKETS &
FS-78 DUCTING. UPDATED DEPTH OF
ALUMASHIELD TO 21 1/4", UPDATED SIDE
PANEL CUTOUT TO 5 1/8" FROM BASE.
B
12/17/2012
1
21 4 "
G
F
F
E
E
FS-78 DUCTING
25.776
D
D
2.62
19" EIA
20 RU
38
24
21.5
DOOR OPENING
EMKA HANDLE
35
DOOR OPENING
C
37
C
36.25
24.93
DDB FORM: 7.1-2 REV:C
B
B
NOTES: UNLESS OTHERWISE SPECIFIED
10/01/12
A
4.38
1. DIMENSIONS AND TOLERANCES ARE IN ACCORDANCE WITH ASME Y14.5M
2. DIMENSIONS ARE IN INCHES, UNLESS OTHERWISE SPECIFIED
3. THIS IS A SUPPLEMENTAL DRAWING AND MAY NOT BE FULLY DIMENSIONED.
THE NOTES, TOLERANCES, AND SPECIAL INSTRUCTIONS ARE TO BE USED ALONG
WITH THE LATEST REVISION OF THE SOLID DATABASE. THE PART OR ASSEMBLY
IS TO BE CONTROLLED PER THE ELECTRONIC FILE.
4. SYMBOL
DENOTES CRITICAL DIMENSIONS AND MUST BE INSPECTED.
5. REMOVE ALL BURRS AND SHARP EDGES 0.025" MAX RADIUS OR CHAMFER
6. DO NOT DEBURR PRESS FIT HOLES
7. DIMENSIONS SHALL APPLY AFTER ALODINE, PAINT, FINISH, OR COAT IS APPLIED
8. INSTALL PRESS FIT STANDOFFS, STUDS, AND NUTS IN ACCORDANCE WITH THE MANUFACTURER’S
SPECIFICATIONS.
9. IDENTIFY PART WITH PART NUMBER, REVISION LETTER AND SERIAL NUMBER
10. FINISHED PART TO BE FREE OF OILS, LUBRICANTS, AND OTHER CONTAMINANTS
11. TOLERANCES, UNLESS OTHERWISE SPECIFIED:
1. HOLE SIZE: +/- 0.003"
2. HOLE TO HOLE: +/- 0.005"
3. HOLE TO EDGE: +/- 0.010"
4. HOLE TO FOLD: +/- 0.015"
5. FOLD TO FOLD: +/- 0.020"
8
7
20
24
UNLESS OTHERWISE SPECIFIED:
ANGULAR:
FRACTIONAL/NO DECIMAL:
ONE PLACE DECIMAL:
TWO PLACE DECIMAL:
THREE PLACE DECIMAL:
1
0.1250
0.0625
0.0200
0.0150
ALL HOLES: 0.0030 .
MATERIAL THICKNESS IS: 0.125"
MATERIAL: Varies
PAINT: Varies
6
5
4
File Location: (DDB)(EPDM Vault:)
C:\DDB\Drawing Requests\Customers\DDB Standard products\DR-00068 (SOD-372420)\
3
DO NOT SCALE DRAWING
DDB Unlimited Inc.
NAME DATE
DIMENSIONS ARE IN INCHES
Model by:
DDB
06/10/11
Drawn by: MarvinS
12/17/12
Sales.Rep.: Steveb
Q.A. Appr.: SteveA
12/17/12
12/17/12
Prod.Mgr.: ClarkK
12/17/12
Control Number:
2
A
SOD-372420
SIZE
Cage Code:
D
385Y5
SCALE: 1:2
DWG. NO.:
DR-00068
WEIGHT: 69 lbs.
REV
B
SHEET 1 OF 7
1
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DDB Unlimited, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF DDB Unlimited, INC. IS PROHIBITED.
43.875
8
7
6
4
5
3
2
1
H
H
G
G
2
.199 (TYP)
2
F
.275
.275
F
1.5 (TYP)
3
2.375
29.7
2.375
.588
.275
E
E
.625
.5
3
.155
(TYP)
.625
C
1.75
.625
D
D
.25
.25
.5
Top of Rail
DETAIL C
SCALE 1.5 : 1
Bottom of Rail
#10-32 (TYP)
C
.25
C
35
.5
DDB FORM: 7.1-2 REV:C
19 RU
.25
.625
1.75
#10-32
(TYP)
.625
B
B
.5
.155
(TYP)
10/01/12
D
.625
.275
DETAIL D
SCALE 1.5 : 1
A
.588
DDB Unlimited Inc.
A
SOD-372420 19'' Rail
MATERIAL: Varies
PAINT: Varies
8
7
6
5
4
File Location: (DDB)(EPDM Vault:)
C:\DDB\Drawing Requests\Customers\DDB Standard products\DR-00068 (SOD-372420)\
3
DO NOT SCALE DRAWING
2
SIZE
Cage Code:
D
385Y5
SCALE: 1:2
DWG. NO.:
DR-00068
WEIGHT: lbs.
REV
B
SHEET 6 OF 7
1
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DDB Unlimited, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF DDB Unlimited, INC. IS PROHIBITED.
35