When printing to a Kyocera 2100 “Private Print” will be enabled by default. This will allow you to send a job to the printer but not have it print until you’re standing in front of the device. If you are printing something and want to have it print right away you can go into “Properties” when printing and go to the “Job” side tab. Remove the checkmark next to the icon under “Job Storage.” Doing so will make the job start printing right away. When printing via private print you will be asked for an Access Code:
This is the code you will need to enter when you go to the device to print your job. It can be any 4 digits you choose, you just need to remember which access code you entered when printing. Put in a 4 digit code and click OK for your job to be sent to the printer. Once you get to the printer push the “Document Box” button and choose the “Private/Stored” option and push OK. A list of usernames will show up. Find your name and click OK. A list of documents you’ve printed will show up. Choose the document or “All Files” and push OK
Choose “Print” to print your job You will be asked for your ID. Put in the 4 digits you chose when printing from your computer via the keypad below and push “OK” Choose the number of copies and hit OK. Your job will print.