Location:
®
24” X 24” HEAVY DUTY PARKING
AREA CATCH BASIN
F1570
Specification: MIFAB® Series F1570 - (A, B, C, D or E) powder epoxy coated heavy duty parking area catch basin with anchor flange, and
extra heavy duty 24” x 24” (610 x 610) two section (specify material finish) grates with a free area of 200 square inches (129,032²). Grates to
have maximum 13/16” (21) openings.
Function: Used in industrial factories, mechanical rooms, parking garages and other membrane finished areas. 24” x 24” tractor grate is used
with all types of poured finished floors. The anchor flange provides maximum support for drain. Extra deep sump body is designed to handle
large flows of water.
FREE AREA
200 in² (129,032²)
1-1/2” (38) THICK DUCTILE IRON GRATES
(-4) DUCTILE IRON RECOMMENDED FOR
HEAVY WHEEL TRAFFIC (T1200-4)
24 1/2
” (622
)
3/8” (9) MAXIMUM WIDTH
DRAINAGE SLOTS
2” (51)
13 1/2” (292)
OR AS REQUIRED
PIPE SIZE (SEE
CHART BELOW)
2” WIDE
ANCHOR
FLANGE
OPTIONAL DEEP SEAL
TRAP AND NO HUB
INLET (SUFFIX -SIT)
NO HUB
OUTLET
BODY DEPTH
- A,B,C,D,E
(SEE CHART)
OPTIONAL DEEP SEAL TRAP
WITH CLEANOUT ACCESS PLUG
(SUFFIX -32)
BAKED POWDER EPOXY
COATED STEEL BODY
Metric equivalents see chart below (Dimension) Denotes Millimetres
MODEL
NO.
F1570-A
F1570-B
F1570-C
F1570-D
F1570-E
F1570 Series meets
ANSI/ASME floor
drain standard
A112.6.3-2001
BODY DEPTH
NO HUB
PIPE SIZE
2” (51)
3” (76)
4” (102)
6” (152)
18” (457)
24” (610)
30” (762)
36” (914)
SPECIAL
SUFFIX
OPTIONAL VARIATIONS
-3
Stainless steel strainer (veneer)
-4
Ductile iron strainer
-6
Security screws (T-20 Torx & pin)
-12
Galvanized top assembly
-13
Galvanized body
-15Extension
-28
Stainless steel body and grate (Type 304)
-32
Deep seal trap on outlet side
SUFFIX
-95
-BA
-C
-SI
-SIT
-MG
-PA
(Specify)
OPTIONAL VARIATIONS
Client logo
Buy American Act compliant product
Membrane clamp
No hub side inlet
No hub side inlet trap
MI-GARD Floor Drain Trap Sealer (2”, 3” or 4”)
Pennsylvania Steel Act compliant product
Special outlet size
Job Name:
Page No:
Section No:
Contractor:
Schedule No:
Purchase Order No:
MIFAB reserves the right to make changes in material and design without formal notice and obligation.
USA: 1-800-465-2736 www.mifab.com CAN: 1-800-387-3880
Page F86
09-07-2016