exceptionally quiet environment to enable you to focus on
−− 11,000-litre grain tank, discharging rate up to 130 l/s
your work
−− 3D-cleaning system for slopes up to 20%
−− CMOTION multifunction control
−− Professional straw processing with SPECIAL CUT and
power spreader with automatic discharge direction
adjustment for even spreading of straw over the entire
EASY.
−− NEW: AUTO CLEANING
working width
CPS – CLAAS POWER SYSTEMS.
−− NEW: AUTO SLOPE
−− NEW: Automatic crop flow monitoring
−− TELEMATICS
−− GPS PILOT
−− CRUISE PILOT
−− Job management
−− NEW: Mercedes-Benz engines provide reliable reserves of
power, even under the toughest field conditions
−− High-performance working hydraulics for even faster
operation of the AUTO CONTOUR cutterbar control
−− TERRA TRAC and tyre technology for optimal ground
protection
Cutterbars.
−− NEW: LEXION 660 TERRA TRAC
−− Easy and convenient access to maintenance points
−− NEW: Side access to straw walker compartment
−− VARIO cutterbars in widths up to 12.30 m facilitate up to
10% better performance by optimising the crop flow
−− All VARO cutterbars with integrated rapeseed plates and a
table with an adjustment range of 70 cm
−− MAXFLEX 930 and 770 with knife bar which can flex up to
18 cm
−− The AUTO CONTOUR intelligent cutterbar control system
automatically compensates for surface irregularities in the
direction of travel as well as those in the transverse
direction
Residual grain separation
Straw walkers
Straw walker length
Straw walker area
Separation area
MULTIFINGER SEPARATION SYSTEM
Crop cleaning
Plastic preparation floor (divided, removable from the front)
Fan
Fan adjustment, electric
Dual ventilated step
Divided, counterdirectional sieve pan
3D-cleaning system
Total sieve area
Sieve adjustment, electric
Returns feed to accelerator
Returns visible from the cab on the go
Returns display in CEBIS
GRAINMETER
Grain tank
Capacity (as per ANSI/ASAE S312.2)
Unloading auger swivel angle
Discharge rate
QUANTIMETER yield meter
Automatic chain lubrication for grain tank unloading
degrees
m2
No.
m
m2
m2
m2
l
degrees
l/s
●
●
1700
600
395-1150
166-483
●
○
○
142
1.26
●
●
●
●
–
●
●
1700
600
395-1150
166-483
●
○
○
142
1.26
●
●
●
●
–
●
●
1420
600
395-1150
166-483
●
○
○
142
1.06
●
●
●
●
○
●
●
1420
600
395-1150
166-483
●
○
○
142
1.06
●
●
●
●
–
6
4.4
7.48
9.85
●
6
4.4
7.48
9.85
●
6
4.4
7.48
9.85
●
5
4.4
6.25
8.23
●
5
4.4
6.25
8.23
●
●
6-turbine
●
●
●
○
5.8
●
●
●
○
○
●
6-turbine
●
●
●
○
5.8
●
●
●
○
○
●
6-turbine
●
●
●
○
5.8
●
●
●
○
○
●
4-turbine
●
●
●
○
4.8
●
●
●
○
○
●
4-turbine
●
●
●
○
4.8
●
●
●
○
○
11000/
10000 (MONTANA)
101
110 (○ 130)
○
○
10000/
○ 11000
101
110 (○ 130)
○
○
9000/
○ 10000
101
110
○
○
9000
8000/
○ 9000
101
80 (○ 110)
○
○
101
80 (○ 110)
○
○
LEXION
660 /
660 TERRA TRAC 650
630 /
630 MONTANA 620
Chopper
SPECIAL CUT 88-blade straw chopper
SPECIAL CUT straw chopper, 72 knives
STANDARD CUT 64-blade chopper
STANDARD CUT 52-blade straw chopper
Power spreader
Hydraulic changeover from cab (road travel, swathing, chopping)
Hydraulic adjustment static knife and grating element
Chaff spreader
Chaff fan with power spreader
Automatic discharge direction adjustment
○
–
○
–
○
●
○
○
○
○
○
–
○
–
○
●
○
○
○
○
○
–
○
–
○
●
○
○
○
○
–
○
–
○
–
●
○
○
–
–
–
○
–
○
–
●
○
○
–
–
Running gear
Side slope levelling up to 17%
Longitudinal levelling up to 6%
TERRA TRAC crawler tracks with hydropneumatic suspension
POWER TRAC all-wheel drive
2-speed manual transmission
30 km/h
Car-like driving characteristics
● (MONTANA)
● (MONTANA)
● (TERRA TRAC)
○
● (MONTANA)
○
●
–
–
● (TERRA TRAC)
○
–
○
●
–
–
–
○
–
–
–
● (MONTANA)
● (MONTANA)
–
○
● (MONTANA)
● (MONTANA)
● (MONTANA)
–
–
–
○
–
–
–
Engine
Manufacturer
Model
Cylinders / displacement
Engine control
Maximum output (ECE R 120)
Emissions standard Stage IV (Tier 4)
Fuel consumption measurement
Fuel tank capacity
Planar radiator screen cleaning
DYNAMIC COOLING
Mercedes-Benz
OM 470 LA
S 6/10.7
Electronic
320/435
●
○
800
–
●
Mercedes-Benz
OM 470 LA
S 6/10.7
Electronic
300/408
●
○
800
–
●
Mercedes-Benz
OM 936 LA
S 6/7.7
Electronic
260/354
●
○
800
●
–
Mercedes-Benz
OM 936 LA
S 6/7.7
Electronic
260/354
●
○
800
●
–
Mercedes-Benz
OM 936 LA
S 6/7.7
Electronic
230/313
●
○
800
●
–
●
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○
●
○
○
○
–
○
○
○
●
○
○
○
–
○
○
○
15400
15400
14900
14300
14300
LEXION
MONTANA 660
630/
630
LEXION
650 MONTANA 620
No./l
kW/hp
l
kg
Tyre size
900/60 R 32
IF800/70 R 32 MI
m
m
ø cat.
1.95
1.95
800/70 R 32 CHO
800/70 R 32
710/75 R 34 MI
IF680/85 R 32 MI
m
m
m
m
1.95
1.95
1.95
1.95
680/85 R 32
m
1.95
800/65 R 32
650/75 R 32
30.5L R 32
TERRA TRAC 635 mm
TERRA TRAC 735 mm
TERRA TRAC 890 mm
m
m
m
m
m
m
1.85
1.85
1.85
–
–
–
External width
3.90
3.90
3.78/
3.78
3.80
3.78/3.78
3.78
3.78
3.65/3.65
3.50
3.50
3.50/
3.60
3.86/3.49
–
3.49
3.79
3.99
3.90 3.62
3.78 3.49
3.62
3.49
3.78
3.78
3.65
3.50
3.49
3.49
3.37
3.22
3.49/3.49
3.37/3.22/
3.29
3.50 3.50 3.22/
3.29
3.86 3.86 3.58/3.49 3.49 3.20
–
–
3.49
3.49 –
–
3.79 –
–
3.99 –
–
670
670
MONTANA 660
630
650
630
MONTANA 620
3.80
–
3.49
3.49
3.80
3.49
3.49
3.49
3.49
3.22
3.22
3.49
3.22
3.20
Tyres on the steering axle
Tyres on the drive axle
EASY
CEBIS
TELEMATICS (professional, advanced, basic)
Job management
Yield mapping
CRUISE PILOT
GPS PILOT, LASER PILOT, AUTO PILOT
AUTO CLEANING, AUTO SLOPE
Automatic crop flow monitoring
Weights
Wheeled machine without front attachment, straw chopper and
chaff spreader, full fuel tank (can vary depending on equipment)
670/
670
Tyre size
600/65 R 28 IMP
VF 620/70 R 26
VF520/75 R 26 MI
500/85 R 24 IMP
600/55-26.5 IMP
500/70 R 24 IMP
16.5/85-24 IMP
1
m
m
m
m
m
m
m
ø cat.
1.50
1.50
1.50
1.50
1.35
1.35
1.35
External width
3.80 3.80
–
–
3.49 –
3.49 –
3.80 3.801
3.49 3.49
–
–
3.80
–
3.49
3.49
3.80
3.49
–
–
–
3.49
3.491
3.49
–
3.49
3.49
3.22
3.22
3.49
3.22
3.20
Machine height greater than 4 metres
3.22
3.58
3.20
3.49
–
–
–
More height and reach for easy offloading.
8813 mm / 28.91 ft. (4XL)
8479 mm / 27.82 ft. (3XL)
7902 mm / 25.93 ft. (XXL)
7342 mm / 24.09 ft. (XL)
6838 mm / 22.43 ft. (long)
−− The standard and VARIO cutterbar, CERIO cutterbars, rice
cutterbar, rapeseed cutterbar, folding cutterbar, MAXFLEX,
4805 mm / 15.76 ft.
−− Up to 20% more throughput with the APS threshing system
●
●
1700
600
395-1150
166-483
●
○
○
142
1.26
●
●
●
●
–
670 /
670 TERRA TRAC/
670 MONTANA
4655 mm / 15.27 ft.
−− The new soundproofed comfort cab provides an
mm
mm
rpm
rpm
630/
630 MONTANA 620
4510 mm / 14.80 ft.
Threshing technology.
Threshing system
APS acceleration and pre-separation
MULTICROP
Drum width
Drum diameter
Drum speed
with reduction gear
Rasp bar threshing drum
Closed rasp bar threshing drum
7/18 concave
Concave wrap angle
Main concave area
Concave adjustment, electrohydraulic, with overload protection
Synchronised accelerator and impeller
Automatic drum variator tensioner
Large stone trap
Rice threshing unit
660 /
660 TERRA TRAC 650
4365 mm / 14.32 ft.
LEXION
Cab.
−− CEBIS colour screen for machine configuration
670/
670 TERRA TRAC/
670 MONTANA
4148 mm / 13.61 ft.
Built on experience.
The new LEXION.
SUNSPEED, SWATH UP and MAXFLO ensure high flexibility
VARIO 560 (5.56 m / 18.25 ft.)
VARIO 620 (6.17 m / 20.25 ft.)
VARIO 680 (6.78 m / 22.25 ft.)
VARIO 770 (7.69 m / 25.25 ft.)
VARIO 930 (9.22 m / 30.25 ft.)
As CLAAS continually develops its products to meet customers' requirements, all products are subject to change without notice. All descriptions and specifications in this brochure should be considered
approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please consult your nearest CLAAS dealer and their price
list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid hazards, never remove these protective
panels yourself. Please refer to the relevant instructions in the operator's manual in this regard.
All technical specifications relating to engines are based on the European emission regulation standards: Stage. Any reference to the Tier standards in this document is intended solely for information
purposes and ease of understanding. It does not imply approval for regions in which emissions are regulated by Tier.
82
●Standard○Option□Available–Not available
●Standard○Option□Available–Not available
●Standard○Option□Available–Not available
exceptionally quiet environment to enable you to focus on
−− 11,000-litre grain tank, discharging rate up to 130 l/s
your work
−− 3D-cleaning system for slopes up to 20%
−− CMOTION multifunction control
−− Professional straw processing with SPECIAL CUT and
power spreader with automatic discharge direction
adjustment for even spreading of straw over the entire
EASY.
−− NEW: AUTO CLEANING
working width
CPS – CLAAS POWER SYSTEMS.
−− NEW: AUTO SLOPE
−− NEW: Automatic crop flow monitoring
−− TELEMATICS
−− GPS PILOT
−− CRUISE PILOT
−− Job management
−− NEW: Mercedes-Benz engines provide reliable reserves of
power, even under the toughest field conditions
−− High-performance working hydraulics for even faster
operation of the AUTO CONTOUR cutterbar control
−− TERRA TRAC and tyre technology for optimal ground
protection
Cutterbars.
−− NEW: LEXION 660 TERRA TRAC
−− Easy and convenient access to maintenance points
−− NEW: Side access to straw walker compartment
−− VARIO cutterbars in widths up to 12.30 m facilitate up to
10% better performance by optimising the crop flow
−− All VARO cutterbars with integrated rapeseed plates and a
table with an adjustment range of 70 cm
−− MAXFLEX 930 and 770 with knife bar which can flex up to
18 cm
−− The AUTO CONTOUR intelligent cutterbar control system
automatically compensates for surface irregularities in the
direction of travel as well as those in the transverse
direction
Residual grain separation
Straw walkers
Straw walker length
Straw walker area
Separation area
MULTIFINGER SEPARATION SYSTEM
Crop cleaning
Plastic preparation floor (divided, removable from the front)
Fan
Fan adjustment, electric
Dual ventilated step
Divided, counterdirectional sieve pan
3D-cleaning system
Total sieve area
Sieve adjustment, electric
Returns feed to accelerator
Returns visible from the cab on the go
Returns display in CEBIS
GRAINMETER
Grain tank
Capacity (as per ANSI/ASAE S312.2)
Unloading auger swivel angle
Discharge rate
QUANTIMETER yield meter
Automatic chain lubrication for grain tank unloading
degrees
m2
No.
m
m2
m2
m2
l
degrees
l/s
●
●
1700
600
395-1150
166-483
●
○
○
142
1.26
●
●
●
●
–
●
●
1700
600
395-1150
166-483
●
○
○
142
1.26
●
●
●
●
–
●
●
1420
600
395-1150
166-483
●
○
○
142
1.06
●
●
●
●
○
●
●
1420
600
395-1150
166-483
●
○
○
142
1.06
●
●
●
●
–
6
4.4
7.48
9.85
●
6
4.4
7.48
9.85
●
6
4.4
7.48
9.85
●
5
4.4
6.25
8.23
●
5
4.4
6.25
8.23
●
●
6-turbine
●
●
●
○
5.8
●
●
●
○
○
●
6-turbine
●
●
●
○
5.8
●
●
●
○
○
●
6-turbine
●
●
●
○
5.8
●
●
●
○
○
●
4-turbine
●
●
●
○
4.8
●
●
●
○
○
●
4-turbine
●
●
●
○
4.8
●
●
●
○
○
11000/
10000 (MONTANA)
101
110 (○ 130)
○
○
10000/
○ 11000
101
110 (○ 130)
○
○
9000/
○ 10000
101
110
○
○
9000
8000/
○ 9000
101
80 (○ 110)
○
○
101
80 (○ 110)
○
○
LEXION
660 /
660 TERRA TRAC 650
630 /
630 MONTANA 620
Chopper
SPECIAL CUT 88-blade straw chopper
SPECIAL CUT straw chopper, 72 knives
STANDARD CUT 64-blade chopper
STANDARD CUT 52-blade straw chopper
Power spreader
Hydraulic changeover from cab (road travel, swathing, chopping)
Hydraulic adjustment static knife and grating element
Chaff spreader
Chaff fan with power spreader
Automatic discharge direction adjustment
○
–
○
–
○
●
○
○
○
○
○
–
○
–
○
●
○
○
○
○
○
–
○
–
○
●
○
○
○
○
–
○
–
○
–
●
○
○
–
–
–
○
–
○
–
●
○
○
–
–
Running gear
Side slope levelling up to 17%
Longitudinal levelling up to 6%
TERRA TRAC crawler tracks with hydropneumatic suspension
POWER TRAC all-wheel drive
2-speed manual transmission
30 km/h
Car-like driving characteristics
● (MONTANA)
● (MONTANA)
● (TERRA TRAC)
○
● (MONTANA)
○
●
–
–
● (TERRA TRAC)
○
–
○
●
–
–
–
○
–
–
–
● (MONTANA)
● (MONTANA)
–
○
● (MONTANA)
● (MONTANA)
● (MONTANA)
–
–
–
○
–
–
–
Engine
Manufacturer
Model
Cylinders / displacement
Engine control
Maximum output (ECE R 120)
Emissions standard Stage IV (Tier 4)
Fuel consumption measurement
Fuel tank capacity
Planar radiator screen cleaning
DYNAMIC COOLING
Mercedes-Benz
OM 470 LA
S 6/10.7
Electronic
320/435
●
○
800
–
●
Mercedes-Benz
OM 470 LA
S 6/10.7
Electronic
300/408
●
○
800
–
●
Mercedes-Benz
OM 936 LA
S 6/7.7
Electronic
260/354
●
○
800
●
–
Mercedes-Benz
OM 936 LA
S 6/7.7
Electronic
260/354
●
○
800
●
–
Mercedes-Benz
OM 936 LA
S 6/7.7
Electronic
230/313
●
○
800
●
–
●
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○
●
○
○
○
○
○
○
○
●
○
○
○
–
○
○
○
●
○
○
○
–
○
○
○
15400
15400
14900
14300
14300
LEXION
MONTANA 660
630/
630
LEXION
650 MONTANA 620
No./l
kW/hp
l
kg
Tyre size
900/60 R 32
IF800/70 R 32 MI
m
m
ø cat.
1.95
1.95
800/70 R 32 CHO
800/70 R 32
710/75 R 34 MI
IF680/85 R 32 MI
m
m
m
m
1.95
1.95
1.95
1.95
680/85 R 32
m
1.95
800/65 R 32
650/75 R 32
30.5L R 32
TERRA TRAC 635 mm
TERRA TRAC 735 mm
TERRA TRAC 890 mm
m
m
m
m
m
m
1.85
1.85
1.85
–
–
–
External width
3.90
3.90
3.78/
3.78
3.80
3.78/3.78
3.78
3.78
3.65/3.65
3.50
3.50
3.50/
3.60
3.86/3.49
–
3.49
3.79
3.99
3.90 3.62
3.78 3.49
3.62
3.49
3.78
3.78
3.65
3.50
3.49
3.49
3.37
3.22
3.49/3.49
3.37/3.22/
3.29
3.50 3.50 3.22/
3.29
3.86 3.86 3.58/3.49 3.49 3.20
–
–
3.49
3.49 –
–
3.79 –
–
3.99 –
–
670
670
MONTANA 660
630
650
630
MONTANA 620
3.80
–
3.49
3.49
3.80
3.49
3.49
3.49
3.49
3.22
3.22
3.49
3.22
3.20
Tyres on the steering axle
Tyres on the drive axle
EASY
CEBIS
TELEMATICS (professional, advanced, basic)
Job management
Yield mapping
CRUISE PILOT
GPS PILOT, LASER PILOT, AUTO PILOT
AUTO CLEANING, AUTO SLOPE
Automatic crop flow monitoring
Weights
Wheeled machine without front attachment, straw chopper and
chaff spreader, full fuel tank (can vary depending on equipment)
670/
670
Tyre size
600/65 R 28 IMP
VF 620/70 R 26
VF520/75 R 26 MI
500/85 R 24 IMP
600/55-26.5 IMP
500/70 R 24 IMP
16.5/85-24 IMP
1
m
m
m
m
m
m
m
ø cat.
1.50
1.50
1.50
1.50
1.35
1.35
1.35
External width
3.80 3.80
–
–
3.49 –
3.49 –
3.80 3.801
3.49 3.49
–
–
3.80
–
3.49
3.49
3.80
3.49
–
–
–
3.49
3.491
3.49
–
3.49
3.49
3.22
3.22
3.49
3.22
3.20
Machine height greater than 4 metres
3.22
3.58
3.20
3.49
–
–
–
More height and reach for easy offloading.
8813 mm / 28.91 ft. (4XL)
8479 mm / 27.82 ft. (3XL)
7902 mm / 25.93 ft. (XXL)
7342 mm / 24.09 ft. (XL)
6838 mm / 22.43 ft. (long)
−− The standard and VARIO cutterbar, CERIO cutterbars, rice
cutterbar, rapeseed cutterbar, folding cutterbar, MAXFLEX,
4805 mm / 15.76 ft.
−− Up to 20% more throughput with the APS threshing system
●
●
1700
600
395-1150
166-483
●
○
○
142
1.26
●
●
●
●
–
670 /
670 TERRA TRAC/
670 MONTANA
4655 mm / 15.27 ft.
−− The new soundproofed comfort cab provides an
mm
mm
rpm
rpm
630/
630 MONTANA 620
4510 mm / 14.80 ft.
Threshing technology.
Threshing system
APS acceleration and pre-separation
MULTICROP
Drum width
Drum diameter
Drum speed
with reduction gear
Rasp bar threshing drum
Closed rasp bar threshing drum
7/18 concave
Concave wrap angle
Main concave area
Concave adjustment, electrohydraulic, with overload protection
Synchronised accelerator and impeller
Automatic drum variator tensioner
Large stone trap
Rice threshing unit
660 /
660 TERRA TRAC 650
4365 mm / 14.32 ft.
LEXION
Cab.
−− CEBIS colour screen for machine configuration
670/
670 TERRA TRAC/
670 MONTANA
4148 mm / 13.61 ft.
Built on experience.
The new LEXION.
SUNSPEED, SWATH UP and MAXFLO ensure high flexibility
VARIO 560 (5.56 m / 18.25 ft.)
VARIO 620 (6.17 m / 20.25 ft.)
VARIO 680 (6.78 m / 22.25 ft.)
VARIO 770 (7.69 m / 25.25 ft.)
VARIO 930 (9.22 m / 30.25 ft.)
As CLAAS continually develops its products to meet customers' requirements, all products are subject to change without notice. All descriptions and specifications in this brochure should be considered
approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please consult your nearest CLAAS dealer and their price
list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid hazards, never remove these protective
panels yourself. Please refer to the relevant instructions in the operator's manual in this regard.
All technical specifications relating to engines are based on the European emission regulation standards: Stage. Any reference to the Tier standards in this document is intended solely for information
purposes and ease of understanding. It does not imply approval for regions in which emissions are regulated by Tier.
82
●Standard○Option□Available–Not available
●Standard○Option□Available–Not available
●Standard○Option□Available–Not available
Cutterbars
Cutterbars
Front attachments
VARIO cutterbars
CERIO cutterbars
Rapeseed equipment
Folding cutterbars
SUNSPEED
MAXFLEX
MAXFLO
VARIO rice cutterbars
CERIO rice cutterbars
SWATH UP
Variable speed drive front attachment (electrohydraulic)
Front attachment step drive
Instant cutterbar brake
rows
rpm
rpm
Standard cutterbars
Effective cutting widths
Drive
Folding dividers
Spacing: knife bar – intake auger
Cutting frequency
Multifinger intake auger
Reverser, hydraulic
Automated cutterbar control
CONTOUR
AUTO CONTOUR
Reel speed control
Reel height adjustment
Parked position
Automatic operating position
Replacement knife bar
Crop lifters
1
mm
strokes/min
VARIO 12301, VARIO 1080, VARIO 930, VARIO 770, VARIO 680, VARIO 620, VARIO 560,
VARIO 500
CERIO 930, CERIO 770, CERIO 680, CERIO 620, CERIO 560
For all standard and VARIO cutterbars, not available for CERIO cutterbars
C 540, C 450
16, 12, 8
MAXFLEX 930, MAXFLEX 770, MAXFLEX 620, MAXFLEX 560
MAXFLO 1050, MAXFLO 900
Available as HD version with rice harvesting accessory pack
Available as HD version with rice harvesting accessory pack
SWATH UP 450
284-420
332, 420
○
CERIO 930 (9.22 m), CERIO 770 (7.70 m), CERIO 680 (6.78 m),
CERIO 620 (6.17 m), CERIO 560 (5.56 m)
Single-side gear drive
●
490-680, manually adjustable
1218
●
●
VARIO cutterbars
Effective cutting widths
Drive
Folding dividers
Spacing: knife bar – intake auger
Knife bar
Cutting frequency
Reel and auger bearing
Intake auger diameter
Automated cutterbar control
CONTOUR
AUTO CONTOUR
Reel speed control
Reel height adjustment
Reel levelling system
Table positioning
Parked position
Replacement knife bar
Crop lifters
mm
strokes/min
VARIO 1230 (12.27 m), VARIO 1080 (10.74 m) VARIO 930 (9.22 m), VARIO 770 (7.70 m),
VARIO 680 (6.78 m), VARIO 620 (6.17 m),
VARIO 560 (5.56 m), VARIO 500 (4.95 m)
Synchronised gear drives on both sides
Single-side gear drive
●
●
490-1135, 700 mm continuously adjustable
490-1135, 700 mm continuously adjustable
travel range
travel range
Divided, synchronised drive on both sides
Undivided
1218
1218
Divided reel and intake auger with central
Undivided reel and auger
bearing
660
660
○
●
●
●
●
●
●
●
●
●
○
●
●
●
●
●
●
●
●
○
●
●
●
●
●
●
Only for LEXION 670 TERRA TRAC
●Standard○Option□Available–Not available
●Standard○Option□Available–Not available
HRC / 105012130516 KK ME 0716