CEN-AA
CEN-AA Inline Centralizer Tool
Part No. 20140 – 4403
Description
This is a three-arm conducting tool-string inline centralizer. In vertical holes with a full stack
of tools, the Inline Centralizer provides proper centralization in a well bore of 4.5-inch to
16-inch diameter.
Combinable with
The CEN is combinable with all TTI open hole tools.
For information on Parts, Test, Calibration and Accessory equipment available for the
CEN-AA, contact your Tucker Technologies Technical Sales Representative.
Specification
Parameters
English
Metric
20,000 PSI
1,379 bar
Temperature
325° F
163° C
Weight
92 lbs
41.7 kg
Tool Length
4.8 ft.
1.47 m
Transport Length1
6.65 ft.
2.03 m
3.5 in
8.89 cm
Pressure
Tool OD
1
From end of top thread protector to end of bottom thread protector.
Logging Parameters
Parameter
English
Metric
Borehole Ranges:
Minimum
5.00 in
12.70 cm
Maximum
16 in
40.64 cm
Borehole Environment
Open hole, cased hole, fluid-filled, or air filled.
Ver A - Nov. 2009. This document and the information within are considered confidential and may not be reproduced in any form without the express
written consent of Tucker Technologies, Inc. This document is subject to change without notice.
Tucker Technologies, Inc.
Tel: 918-252-5416
Fax: 918-252-4496
[email protected]
www.tuckerenergy.com
1