DIFFERENTIAL CONNECTOR
FCN-260(D) Series microGiGaCN™
RoHS Compliant
n
FEATURES
• I/O Connector designed for high speed differential
signal applications.   
• Matched Impedance (100 ohms ±10%)
• Low insertion loss
• Low cross talk
• Adopted by InfiniBand as 10G Ethernet, SAS, & sATA for 4x/12x Interface
nSPECIFICATIONS
It em
nMATERIALS
Sp ec i f i c at i o n s
Operating temperature
range
-55˚C to +85˚C
Current rating
AC 0.5A (signal)
AC 1A (ground)
Max. allowable voltage
AC 30
Contact resistance
(20m VDC 10mA)
80 m ohms max. (signal)
45 m ohms max.(ground)
Insulation resistance
1000M ohms minimu m
Dielectric withstanding
voltage
AC 500V for 1 minute
Durability
250 cycle s
Insertion force
55.5 N max. (8 pair)
73 N max. (24 pair)
Withdrawl force
2.5 N min. (8 pair)
8 N min. (24 pair)
Specifications subject to change It em
Mat er i al s
Insulator
LCP Resin (UL94V-0 )
Conductor
Copper Allo y
Plating
Contact: Gold Plating (PAGOS)
Terminal: Gold coat over Pd-Ni
plating
Cover: Zinc
Product Specification are subject to
change, please check our website
(http://us.fujitsu.com/connectors) for
the latest specifications.
http://us.fujitsu.com/connectors
1
microGiGaCN™ FCN- 260 (D) Series
The MicroGigaCN offers a cost-effective
I/O solution for high-speed applications in data and
telecommunications convergence (voice, data, video
and storage). It offers four or twelve link widths,
offering a scalable performance range of 500Mbps
to 6Gbps per link to meet the needs of entry-level
and high-end enterprise systems. Forward crosstalk
is less than 4% at 100 pico second pulse-rise
time (four-pair switching). Fujitsu Components designed the MicroGiGaCN
to specifically address the requirements for a high
speed differential signal I/O connector.
The MicroGiGaCN offers a unique solution to
LVDS, InfiniBand, 10G Ethernet, 3G/6G SAS
& SATA, and other high speed I/O applications.
InfiniBand, IEEE802.3ak, SAS, & SATA have
selected Fujitsu’s connector for the 4x and 12x I/O
connector interface.
The performance requirements of the connector
system were tested with cable to simulate the actual
requirements of an OEM System manufacturer. Our
test data includes the parasitic effects of the PCB,
along with measurements of a completed I/O cable
assembly.
Electrical Performance in out testing:
•
•
•
•
•
Matched Impedance:
100±10 ohms @ 100 ps Trise
Low Cross Talk:
NEXT 4.0% @ 100pc Trise (20 to 80%)
Low Insertion Loss: 2.3dB @ 2.5Gbps (1.25GHz, 1 meter Cable Assembly)
Skew within Differential Pair:
14.4ps (2 connectors and 2 meter of cable)
Skew pair to pair:
21.2ps (2 connectors and 2 meter of cable)
Connection
Specifications subject to change
http://us.fujitsu.com/connectors
2
microGiGaCN™ FCN- 260 (D) Series
Basic Concept for Differential Transfer
BasicConceptforDifferential Transfer
SectionalView (Connection area)
1.5 mm
0.75 mm
Virtual ground
plane
+
+
Patent pending
+
Outer shield
1.27 mm
-
-
-
Differential pair contact
Ground/Powercontact
Product Specification are subject to change, please check our website
(http://us.fujitsu.com/connectors) for the latest specifications.
Fujitsu Components has designed the
mechanical features of the connector to provide space
saving footprint that will allow for 3 4x I/O connectors
to mount onto a PCI form, or 2 12x. As RFI/EMI are
critical elements in high performance cable assemblies,
Fujitsu Components provides the surface mount
sockets with an EMI Ground Spring on the face of
the connector, to insure that the metal surface of the
connector makes sufficient contact with the metal face
of the card bracket.
The latching mechanism of the backshell
offers a lanyard system for ease of un-mating the
I/O plug connector/cable assembly from the SMT I/O
socket. The die cast backshell offers excellent RFI/
EMI characteristics. The backshell uses a ferrule and
Specifications subject to change
unique ground spring system to provide 360 degree
contact of the cable shield to the backshell, which,
combined with the solid interconnect of the socket to
faceplate, offers low AC coupling termination.
The current version of the I/O plug comes
with an attached paddlecard for wire termination.
Fujitsu offers the paddlecard in either an equalized
or un-equalized version (see factory for details of the
equalized version). Standard product offering will be
un-equalized. As there are multiple applications for
the paddlecard, with industry and customer specific
wire termination, Fujitsu Components offers options
to customers of providing the I/O plug connector with
custom paddlecards (consult factory).
http://us.fujitsu.com/connectors
3
microGiGaCN™ FCN- 260 (D) Series
CABLE I/O JACK SCREW LOCK TYPE - WITH ALIGNMENT PIN / WITH CRUSH PIN
nDIMENSIONS
Insula tor
Signal con tact
( J1)
J2
9.6
J3
6.75
7.39
Y
S(mx2-1)
Signal con tact
Section X-X
1.3
Ground con tact
6.1
S(2)
(Center of dimension value 1.3mm)
G(1)
Sheild c over
He xagon sc rew
1.5
0.3
Signal terminal
height
Ø 4
+0.10
-0.15
X
Detail
S(1)
1.5
Ground con tactX
Y
Ground con tact
X
1.2
1.3
6.1
(Center of dimension value 1.3mm)
2-M2.5
9.2
1.5
Section X-X
10.075
X
Solder po st
Ø 4
12
Y
5.8 Max
Gas ket X
Detail
S(1) S(2)
G(1)
7.6
12
S(mx2-1)
Front su rface of shield c over
to top of he xagon sc rew
2-M2.5
X
+0.3
0
7.39
0.3
Signal terminal
height
S(2)
G(1)
X
9.6
6.75
Y
1.2
Signal con tact
Solder po st
10.075
J2
J3
S(mx2)
Insula tor
Gas ket
+0.10
-0.15
X
G(n)
5.8 Max
( J1)
7.6
S(mx2)
G(n)
+0.3
0
Front su rface of shield c over
to top of he xagon sc rew
9.2
Signal con tact
1.5
Ground con tact
X
Scale
5/1
0.3
S(2)
G(1)
Detail
Section Y-Y
G(1)
G(n)
S(1)
S(2)
6.7
S(mx2-1)
0.3
S(1)
S(mx2)
Detail
X
Scale
5/1
Section Y-Y
FCN-268D0**-G/1*
WITH ALIGNMENT PIN
G(1)
G(n)
n RECOMMENDED PCP LAYOUT
S(1)
S(mx2)
Unit: mm
Ground terminal
height
6.7
He xagon sc rew
Ground terminal
height
S(1)
Sheild c over
S(2)
S(mx2-1)
2-Ø 1.8
FCN-268D0**-G/1*
WITH ALIGNMENT PIN
0.15
0.15
Detail
Detail BB
7.65 Detail
Detail AA
7.65
4.75±0.05
0.305±0.025
0.305
±0.025
99
0.305±0.025
0.305
±0.025
+0.05
G(1)
G(1)
{(p-1)x0.5+1.25±0.05}
Detail C C
Detail
ØØ 1.82
1.82 +0.05
00
2-Ø 1.8
Detail B
Detail
1.82
1.82+0.05
00
+0.05
m: Number of signal pin
{(p-1)x0.5+1.25±0.05}
DetailDD
Detail
n : Number of ground pin
p : Number of terminals (total number of signal+, signal-, ground terminals)
Detail C C
Detail
P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size.
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole.
• m: see
Number
of signal sheet
pin about component mounting prohibited area.
• Please
speficication
• n : Number of ground pin
• p : Number of terminals (total number of signal+, signal-, ground terminals)
• P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size.
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole.
• Please see speficication sheet about component mounting prohibited area.
Specifications subject to change
4-0.15
4-0.15
S(2)
S(2)
S(1)
S(1)
ØØ 1.82
1.82 +0.05
00
1.88
1.88
+0.05
00
1.82
1.82+0.05
00
DetailDD
Detail
4-0.15
4-0.15
FCN-268D0**-G/2*
WITH CRUSH PIN
1.88
1.88
+0.05
2.6 +0.05
2.6
00
0.305±0.025
0.305
±0.025
99
6.7 -0.05
6.7
00
3.9±0.05
3.9 ±0.05
5.9
±0.05
5.9±0.05
4.6
4.6 -0.05
-0.05
2.6±0.05
2.6
±0.05
00
5.9
±0.05
5.9±0.05
•
•
•
•
S(2)
S(2)
S(1)
S(1)
2.6±0.05
2.6
±0.05
6.7 -0.05
6.7
S(mx2)
S(mx2-1)
Detail
Detail C
C
00
Edge of P.C.B
Detail
Detail BB
G(1)
G(1)
7.65
7.65
4.75±0.05
3.9±0.05
3.9 ±0.05
2-Ø 2.2 ±0.05
Edge of P.C.B
(P.T.H)
(P.T.H)
S(mx2)
DetailDD
Detail
S(mx2-1)
J8
J8
J7± 0.05
J6± 0.05
4.6
4.6 -0.05
-0.05
G(n)
DetailDG(n)
D
Detail
FCN-268D0**-G/2*
WITH CRUSH PIN
0.305±0.025
0.305
±0.025
Detail
Detail C
C
2-Ø 2.2 ±0.05
(P.T.H)
(P.T.H)
2.6
2.6 +0.05
00
J8
J8
J7± 0.05
J6± 0.05
+0.05
4.75
4.75
2.6
2.6 +0.05
00
G(n)
G(n)
0.5
0.5
0.15
0.15
J6
J6
J7
J7
4.1
4.1
1.25
1.25
1.075
1.075
Detail
Detail AA
Detail
DetailAA
Detail
Detail BB
2-Ø 1.8
0.15
0.15
4.75
4.75
+0.05
2.6 +0.05
2.6
00
J7
J7
1.075
1.075
0.5
0.5
0.15
0.15
J6
J6
4.1
4.1
1.25
1.25
Detail AA
Detail
Detail
Detail BB
2-Ø 1.8
Detail B
Detail
Unit: mm
Unit: mm
http://us.fujitsu.com/connectors
4
microGiGaCN™ FCN- 260 (D) Series
CABLE I/O JACK SCREW LOCK TYPE - WITH DIAMOND PIN
n DIMENSIONS / RECOMMENDED PCP LAYOUT
Ø 1.8
Alignment pin
Detail G
Detail H
J9
4.75
1.8
1.5
1.25
J10
0.15
0.15
0.5
Detail G
7.39
Detail H
+0.3
0
Front su rface of shield c over
to top of h exagon sc rew
5.8 Max
X
Ø 4
7.6
+0.10
-0.15
10.075
Solder po st
1.3
6.1
(Center of dimension value 1.3mm)
9.2
G(n)
2-Ø 2.2 ±0.05
(P.T.H.)
J11±0.05
J10±0.05
J9±0.05
7.65
4.75 ±0.05
Detail J
0.305 ±0.025
0.305 ±0.025
G(1)
+0.05
0
9
2.6
S(mx2-1)
2.6 +0.05
0
S(mx2)
5.9 ±0.05
0
6.7 -0.05
Edge of P.C.B
3.9 ±0.05
0
4.6 -0.05
S(2)
S(1)
2- Ø1.82 +0.05
0
{(p-1)x0.5+ 1.25 ±0.05
Detail J
•
•
•
•
m: Number of signal pin
n : Number of ground pin
p : Number of terminals (total number of signal+, signal-, ground terminals)
P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size.
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole.
• Please see speficication sheet about component mounting prohibited area.
Specifications subject to change
http://us.fujitsu.com/connectors
5
microGiGaCN™ FCN- 260 (D) Series
CABLE I/O JACK SCREW LOCK TYPE
FCN-268D0**-G/ * * PANEL CUTOUT (REFERENCE)
nDIMENSIONS
(1)
J13±0.1
J14±0.1
J15±0.1
.
ax
3m
.
R0
10°
2-Ø3.2 +0.05
0
4.975
10.3±0.1
10°
2.4 max.
Panel
P.C.B
1.85
( 3.9)
( 5.9)
Unit: mm
n PART NUMBERS
Dimensions (mm)
Part Number
J13
J14
J15
FCN-264D008-G/**
27
24
19.7
FCN-264D024-G/**
51
48
43.7
Specifications subject to change
http://us.fujitsu.com/connectors
6
microGiGaCN™ FCN- 260 (D) Series
CABLE I/O JACK SCREW LOCK TYPE - WITH ALIGNMENT PIN / WITH CRUSH PIN
n PART NUMBERS
FCN-268D**-G/1 with alignment pin
Part Number
Pair
FCN-268D008-G/10
FCN-268D008-G/11
8
FCN-268D008-G/13
FCN-268D024-G/10
FCN-268D024-G/11
24
FCN-268D024-G/13
PCB
thickness
(mm)
Dimensions (mm)
X
J1
J2
J3
J6
J7
J8
1.6
2.325
29.8
20.15
17.25
14.5
19.25
22.15
2.4
3.125
29.8
20.15
17.25
14.5
19.25
22.15
4.0
4.725
29.8
20.15
17.25
14.5
19.25
22.15
1.6
2.325
53.8
44.15
41.25
38.5
43.25
46.15
2.4
3.125
53.8
44.15
41.25
38.5
43.25
46.15
4.0
4.725
53.8
44.15
41.25
38.5
43.25
46.15
n PART NUMBERS
FCN-268D**-G/2 with crush pin
Part Number
Pair
FCN-268D008-G/20
FCN-268D008-G/21
Dimensions (mm)
X
J1
J2
J3
J6
J7
J8
1.6
2.325
29.8
20.15
17.25
14.5
19.25
22.15
2.4
3.125
29.8
20.15
17.25
14.5
19.25
22.15
FCN-268D008-G/23
4.0
4.725
29.8
20.15
17.25
14.5
19.25
22.15
FCN-268D024-G/20
1.6
2.325
53.8
44.15
41.25
38.5
43.25
46.15
2.4
3.125
53.8
44.15
41.25
38.5
43.25
46.15
4.0
4.725
53.8
44.15
41.25
38.5
43.25
46.15
FCN-268D024-G/21
8
PCB
thickness
(mm)
24
FCN-268D024-G/23
n PART NUMBERS
FCN-268D**-G/3 with diamond pin
PCB
thickness
(mm)
X
J9
J10
J11
1.6
2.325
14.5
19.25
22.15
2.4
3.125
14.5
19.25
22.15
FCN-268D008-G/33
4.0
4.725
14.5
19.25
22.15
FCN-268D024-G/30
1.6
2.325
38.5
43.25
46.15
2.4
3.125
38.5
43.25
46.15
4.0
4.725
38.5
43.25
46.15
Part Number
Pair
FCN-268D008-G/30
FCN-268D008-G/31
FCN-268D024-G/31
8
24
FCN-268D024-G/33
Specifications subject to change
Dimensions (mm)
http://us.fujitsu.com/connectors
7
microGiGaCN™ FCN- 260 (D) Series
Signal contact
FCN-264D - VERTICAL MOUNT SOCKETS, LATCH STYLE
Ground contact
n
DIMENSIONS
Signal contact
7.175
G[1]
Section X-X
7.175
S[2]
3
X
Detail V
1.2
Section
1.2
Section
1.3
6.7
6.4
6.7
6.4
X
Y
Detail W
Detail 2-Ø
W 1.8
0.5 TYP
Terminal Pit1.25
ch
2-Ø 1.8
0.5 TYP
Terminal Pitch
B
C
Detail V
4.7
S[1]
4.7
2-Ø 1.8
1.25
B
3.2
3.2
C
0.3
Z-Z
Z-Z
0.3
(Solder post)
Detail V
(Signal・Ground Terminal)
(Solder post)
0.15
Signal Terminal
0.15
Signal Terminal
0.15
Ground Terminal
0.15
Ground Terminal
Detail W
(Contact Terminal)
FCN-264D0**-G/2**
WITH CRUSH PIN
Detail V
FCN-264D0**-G/2**
(Signal・Ground Terminal)
Detail W
WITH CRUSH PIN
2- 1.88
Signal Contact Pit
ch TYP
1.5
1.5 TYP
S[1] Z
1.5 TYP
S[2m-1]
Y
Z
FCN-264D0**-G/1**
WITH ALIGNMENT PIN
1
12
1.5 TYP
Ground Contact Pitch
Signal Contact Pitch
0.025
Z
S[2m-1]
Ground Contact Pitch
Z
X
1
G[1]
1
12
G[n]
1.3
S[2m]
Section Y-Y
2-Ø 1.8
4-R
0.15
X
A
0.025
4-R
0.15
Y
FCN-264D0**-G/1**
WITH ALIGNMENT P
X
1
13
S[2]
3
Section Y-Y
3.9
10.3
X
G[n]
13
A
S[2m]
Section X-X
3.9
10.3
Y
Ground contact
Unit: mm
(Contact Terminal)
n RECOMMENDED
PCB LAYOUT (TOP VIEW)
B±0.05
2-Ø2.2±0.05
(P.T.H)
S[2]
S[1]
S[2m]
{0.5x(p-1)}±0.0
C±0.05
•
3.2±0.05
Connector
S[2]
S[1]
m: Numbermounting
of signalarea
pin
n : Number of ground pin
S[2m]
1.25terminals)
p : Number of terminals (total number of signal+, signal-, ground
P.T.H: Plated Through
hole. Dimensions after soldering shall meet
specified size
S[2m-1]
{0.5x(p-1)}±0.0
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole
3.2±0.05
Please see speficication sheet about C±0.05
component mounting prohibited
area
3.9±0.1
•
•
•
•
0.305±0.025
1.25
S[2m-1]
G[1]
14+0.1
0
0.305±0.025
14+0.1
0
G[n]
0.5±0.025
Ø 1.82+0.05
0
0
8.8 -0.1
0
1-0.1
Connector
mounting area
G[1]
2.6±0.05
0
8.8 -0.1
0
1-0.1
2-Ø2.2±0.05
(P.T.H)
B±0.05
3.9±0.1
G[n]
0.5±0.025
Ø 1.82+0.05
0
1.82+0.05
0
1.82+0.05
0
2.6±0.05
•
•
•
•
Unit: mm
m: Number of signal pin
n : Number of ground pin
p : Number of terminals (total number of signal+, signal-, ground terminals)
P.T.H: Plated Through hole. Dimensions after soldering shall meet specified size
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole
• Please see speficication sheet about component mounting prohibited area
Specifications subject to change
http://us.fujitsu.com/connectors
8
microGiGaCN™ FCN- 260 (D) Series
FCN-264D - VERTICAL MOUNT SOCKETS, LATCH STYLE
n PART NUMBERS
FCN-264D**-G/1 with alignment pin
Part Number
Pair
FCN-264D008-G/1D
FCN-264D008-G/1F
8
FCN-264D008-G/1K
FCN-264D024-G/1D
FCN-264D024-G/1F
24
FCN-264D024-G/1K
PCB
thickness
(mm)
Dimensions (mm)
X
A
B
C
1.6
2.325
17.675
14.5
17.7
2.4
3.125
17.675
14.5
17.7
4.0
4.725
17.675
14.5
17.7
1.6
2.325
41.675
38.5
41.7
2.4
3.125
41.675
38.5
41.7
4.0
4.725
41.675
38.5
41.7
n PART NUMBERS
FCN-264D**-G/2 with crush pin
Part Number
Pair
FCN-264D008-G/2D
FCN-264D008-G/2F
Dimensions (mm)
X
A
B
C
1.6
2.325
17.675
14.5
17.7
2.4
3.125
17.675
14.5
17.7
FCN-264D008-G/2K
4.0
4.725
17.675
14.5
17.7
FCN-264D024-G/2D
1.6
2.325
41.675
38.5
41.7
2.4
3.125
41.675
38.5
41.7
4.0
4.725
41.675
38.5
41.7
FCN-264D024-G/2F
8
PCB
thickness
(mm)
24
FCN-264D024-G/2K
n
RECOMMENDED FOOTPRINT DIMENSIONS
Length of Solder Post
Recommended panel thickness = 1±0.1
K±0.2
Board Surface
to I/O Panel Su rface
4.7
P.C.B.
X
Thickness of Lock Plate
J±0.1
H±0.1
(F±0.1 )
Thickness of I/O Panel
G
10.3±0.1
7.2±0.1
I/O Panel
Unit: mm
n PART NUMBERS
Dimensions (mm)
Part Number
P
(Lock plate thickness)
K
Retention Clip Part
Number
J
K
N
(Panel thickness)
FCN-264D008-G/**
19.7
22.7
1.0
0.5
6.35
FCN-260A622
FCN-264D024-G/**
43.2
46.7
1.0
0.5
6.34
FCN-260A626
Specifications subject to change
http://us.fujitsu.com/connectors
9
microGiGaCN™ FCN- 260 (D) Series
4X / 12X RIGHT ANGLE MOUNT SOCKETS WITH LATCHES
nDIMENSIONS
Detail D
FCN-268D0**-G/1**
WITH ALIGNMENT PIN
1.075
Ø 1.8 (2X)
1.25
X
4.1
( 6.1 )
0.15 ±0.01
E
F
A
0.05 A
3.2
7.175
Detail D
(B)
E
G ( Keep-out area )
F ±0.05
(M)
E ±0.05
G[n]
S
5.175 ( Keep-out area )
3.2 ±0.05
(1.575)
0.305 ±0.025
0.05 A S
Detail G
2- Ø 2.2 ±0.05
(P.T.H.)
0.305 ±0.025
0.05 A S
G[1]
Detail E
FCN-268D0**-G/2**
WITH CRUSH PIN
S[2]
2.6 ±0.05
Ø 1.8 (2X)
S[1]
S[2m]
S[2m-1]
5.9 ±0.05
0
6.7 -0.05
3.9 ±0.05
0
4.6 -0.05
Edge of P.C.B.
1.82
+0.05
0
9.7
Detail F
Ø1.82 +0.05
0
Detail F
1.88 ±0.05 (2X)
Detail
0.5 TYP
0.15±0.01
0.05 A S
1.25
0.5 TYP
A
Detail G
A
0.15 (4X)
•
•
•
•
m: Number of signal pin
n : Number of ground pin
p : Number of terminals (total number of signal+, signal-, ground terminals)
P.T.H: Plated Through hole. Dimensions after soldering shall meet specified size.
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole.
• Please see speficication sheet about component mounting prohibited area.
Detail E
Unit: mm
n RECOMMENDED PANEL LAYOUT
(N )
Panel
P
K±0.1
J±0.1
.3
M
AX
X)
(4.75)
.
Panel cutout center line
4.975
7.2±0.1
10.3±0.1
R0
(8
(6.75)
Recommended panel thickness = 1±0.1
P.C.B.
(3.9)
(5.9)
1.85±0.1
n PART NUMBERS
Dimensions (mm)
Part Number
J
19.7
FCN-268D008-G/**
Part Number
J
FCN-268D024-G/**
N
P
(Lock plate thickness)
(Panel thickness)
Dimensions
(mm)
1.0
22.7
0.5
K
43.7
K
N
1.0
46.7
(Panel thickness)
Unit: mm
Retention Crip
Part Number
FCN-260A622
P
FCN-260A626
(Lock0.5plate thickness)
Retention Clip Part
Number
FCN-268D008-G/**
19.7
22.7
1.0
0.5
FCN-260A622
FCN-268D024-G/**
43.2
46.7
1.0
0.5
FCN-260A626
Specifications subject to change
http://us.fujitsu.com/connectors
10
microGiGaCN™ FCN- 260 (D) Series
4X / 12X RIGHT ANGLE MOUNT SOCKETS WITH LATCHES WITH ALIGNMENT POST OR
CRUSH PIN OPTION
n PART NUMBERS
FCN-268D**-G/1 with alignment pin
PCB
thickness
(mm)
X
A
B
E
F
G
M
1.6
2.325
17.675
24.85
14.5
17.7
19.675
16.075
2.4
3.125
17.675
24.85
14.5
17.7
19.675
16.075
FCN-268D008-G/1K
4.0
4.725
17.675
24.85
14.5
17.7
19.675
16.075
FCN-268D024-G/1D
1.6
2.325
41.675
48.85
38.5
41.7
43.675
40.075
2.4
3.125
41.675
48.85
38.5
41.7
43.675
40.075
4.0
4.725
41.675
48.85
38.5
41.7
43.675
40.075
Part Number
Pair
FCN-268D008-G/1D
FCN-268D008-G/1F
8
FCN-268D024-G/1F
24
FCN-268D024-G/1K
Dimensions (mm)
n PART NUMBERS
FCN-268D**-G/2 with crush pin
Part Number
Pair
PCB
thickness
(mm)
X
A
B
E
F
G
M
1.6
2.325
17.675
24.85
14.5
17.7
19.675
16.075
2.4
3.125
17.675
24.85
14.5
17.7
19.675
16.075
4.0
4.725
17.675
24.85
14.5
17.7
19.675
16.075
1.6
2.325
41.675
48.85
38.5
41.7
43.675
40.075
2.4
3.125
41.675
48.85
38.5
41.7
43.675
40.075
4.0
4.725
41.675
48.85
38.5
41.7
43.675
40.075
FCN-268D008-G/2D
FCN-268D008-G/2F
8
FCN-268D008-G/2K
FCN-268D024-G/2D
FCN-268D024-G/2F
24
FCN-268D024-G/2K
Dimensions (mm)
Retention Clip Hand Tool
Retention Clip
Y
11.2
X
Unit: mm
FCN-268T-T514/H
Each connector is shipped with 1 piece of
FCN-260A622 (8-pair) or FCN-260A626
(24-pair) retention clip. To order connector
and retention clip separately, please
contact sales for part number.
For Assembly instructions, please see the
Lock Plate Hand Tool Instruction Manual
n PART NUMBERS
Part Number
Pair
Dimensions
(mm)
X
Y
Panel thickness
(mm)
FCN-260A622
8
23.45
0.5
1.0
FCN-260A626
24
47.45
0.5
1.0
Specifications subject to change
http://us.fujitsu.com/connectors
11
microGiGaCN™ FCN- 260 (D) Series
4X / 12X RIGHT ANGLE MOUNT CONNECTOR SOCKET WITH LATCHES WITH MOUNTING EARS
nDIMENSIONS
2-M 2.5
S1
6.15
X
Y
Ø 1.8
A
Detail
F
G(n)
0.3
E
S(2xm)
10.075
Section X-X
G1
0.15 ±0.01 S2
0.05 AS1
1.3 ±0.05
B
C
1.3 ±0.05
1.5
S
Detail C
Section Z-Z
(Board pin)
1.5
S
A
S(mx2-1)
C
Detail A
0.33
3.2
Spring
10.525
4.6
0
-0.05
S(mx2-1)
•
•
•
•
0.305 ±0.025
0.05 A
0.1 A
+0.05
0
G1
S2
A
S1
2.6
A
0.305 ±0.025
0.05 A
0.5 TYP
1.25
Detail D
A
Edgepin
of P.C.B.
m: Number of signal
A
0.5 TYP
n : Number of ground pin
S(mx2)
1.25
p : Number of terminals (total number of signal+, signal-, ground terminals)
S(mx2-1)
P.T.H: Plated Through
hole. Dimensions after soldering shall meet spefified size.
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to platedDetail
through
hole.
D
• Please see speficication sheet about component mounting prohibited area.
• m: Number of signal pin
• n : Number of ground pin
• p : Number of terminals (total number of signal+, signal-, ground terminals)
• P.T.H: Plated Through hole. Dimensions after soldering shall meet spefified size.
Connector pins shall be fixed by solder or equivalent method after inserting connector pins to plated through hole.
• Please see speficication sheet about component mounting prohibited area.
Specifications subject to change
L
(5.55)
D
2.6
Detail
2- Ø 1.82 +0.05
0
Section S-S
L
+0.05
0
1.575
2.6
3.9±0.05
5.9±0.05
0
6.7 -0.05
9.7
F
0.3
0.305 ±0.025
0.05 A
Detail B
G1
S2
S1
+0.05
0
3.2
K
4.6
S(mx2)
0.1 A
E
Connector mounting area
Edge of P.C.B.
0.305 ±0.025
0.05 A
2.6
J
2- Ø 1.82 +0.05
0
+0.05
0
1.575
10.525
0
-0.05
2-Ø2.2 ±0.05
0.12 A
(P.T.H.)
F
2.6
3.9±0.05
5.9±0.05
0
6.7 -0.05
9.7
2-Ø2.2 ±0.05
0.12 A
(P.T.H.)
Connector mounting
G(n) area
Unit: mm
2.6
Detail A
n RECOMMENDED PCB
LAYOUT
(TOP
VIEW)
3.2
Detail D
K
0.3
Section S-S
60
°
S
E
G(n)
A
0.33
Detail B
J
Detail C
S
+0.10
-0.15
S(2xm)
Detail
F
E
1.8
G(n)
0.15 ±0.01
0.05 A
G1
0.5 TYP
0.15 ±0.01
Terminal pitch
0.05 A
1.25
0.15 ±0.01
A
0.05 A
0.5 TYP
Terminal pitch
1.25
+0.10
-0.15
Spring
A
S2
Section Y-Y
S1
Z
0
-0.05
0
Ø 1.8 -0.05
A
Section Y-Y
Section Z-Z
(Board pin)
3.2
S(mx2-1)
Detail
Z
4.1
6.1
9.2
B
Detail
Detail
Detail
Z
S1
1.5 TYP
Signal Contact
1.5 TYP
Ground Contact
6.15
0.3±0.1
6.4
6.4 ±0.1
G(n)
S(mx2-1)
Z
4.1
6.1
9.2
Section X-X
(5.55)
X
12
7.2
1.5 TYP
Signal Contact
1.5 TYP
Ground Contact
S2
G1
Ground contact
60
°
Y
3
Ground contact
Insulator
10.075
X
G(n)
S(mx2-1)
Y
Gasket
Differential Signal Contacts
0.3 ±0.05
S(mx2)
12.525
2-M
2.5
9.675
6.92
0.3 ±0.05
12
7.2
C
B
A
1.075
X
S2
G1
1.075
X
3
XD
Insulator
1.2 ±0.05
0.12 A
Y
Gasket
Differential Signal Contacts
1.8
S(mx2)
12.525
9.675
6.92
1.2 ±0.05
0.12 A
D
C
B
A
Unit: mm
Unit: mm
http://us.fujitsu.com/connectors
12
microGiGaCN™ FCN- 260 (D) Series
4X / 12X RIGHT ANGLE MOUNT CONNECTOR SOCKET WITH LATCHES, WITH
MOUNTING EARS
n PART NUMBERS
Part Number
Pair
PCB
thickness
(mm)
X
A
B
1.6
2.4
24.34
17.42
20.175 23.025
FCN-268D008-G/3L-R
FCN-268D008-G/3M-R
C
D
E
F
J
K
L
17.7
14.5
25.025
16.075
16.65
2.4
3.2
24.34
17.42
20.175 23.025
17.7
14.5
25.025
16.075
16.65
FCN-268D008-G/3P-R
4.0
4.8
24.34
17.42
20.175 23.025
17.7
14.5
25.025
16.075
16.65
FCN-268D024-G/3L-R
1.6
2.4
48.34
41.42
44.175 47.025
41.7
38.5
49.025
38.075
40.65
2.4
3.2
48.34
41.42
44.175 47.025
41.7
38.5
49.025
38.075
40.65
4.0
4.8
48.34
41.42
44.175 47.025
41.7
38.5
49.025
38.075
40.65
FCN-268D024-G/3M-R
8
Dimensions (mm)
24
FCN-268D024-G/3P-R
n
RECOMMENDED FOOTPRINT DIMENSIONS
( 1)
G±0.1
H±0.1
I±0.1
.3
R0
X.
MA
4.975
10.3 ±0.1
7.2 ±0.1
Panel
2- Ø 3
(3.9)
(5.9)
1.85
P.C.B.
Unit: mm
n PART NUMBERS
Part Number
Dimensions (mm)
G
H
I
FCN-268D008-G/3*-R
29.85
22.7
19.7
FCN-268D024-G/3*-R
53.85
46.7
43.7
Specifications subject to change
http://us.fujitsu.com/connectors
13
microGiGaCN™ FCN- 260 (D) Series
4X / 12X PLUG CONNECTOR WITH INFINIBAND STYLE PCB
n
REFERENCE
S(2m)
G(n)
S2
(A)
7.9
3.2
G1
S(2m-1)
{1.5
{1.5x(m-1)}
x(m-1)}
Signal
Signalcontact
contact
{1.5
x(n-1)-0.75}
{1.5x(n-1)0.75 }
Ground
contact
Ground
contact
S1
S8
S7
S7
S4
S4
S3
S3
(D)
S(2m-1)
S(2m-1)
S(2m)
S(2m)
( 9.55)
18.1
Solder pad
( 7.05 )
B
C
0.45
0.6
1.1
3.04
(E)
Slot for guard for miss insertion to cover
S2
S1
S6
S5
S(2m-3)
S(2m-2)
Unit: mm
• m : Number of signal pin
• n : Number of ground pin
n PART NUMBERS
Part Number
Pair
Dimensions (mm)
A
B
C
D
E
FCN-261R008-G/5L
8
17.7
10.5
12.0
17.4
14.95
FCN-261R024-G/5L
24
41.7
34.5
36.0
41.4
38.95
Specifications subject to change
http://us.fujitsu.com/connectors
14
microGiGaCN™ FCN- 260 (D) Series
4X / 12X PLUG CONNECTOR WITH INFINIBAND STYLE PCB (CABLE MOUNT)
n PART NUMBERS
Non-Equalized Plug Kits
RoHS 6/6
Data Speeds
FCN-261R008-G/0L
4x up to 3.2Gbps
FCN-261R008-G/5L
4x up to 5Gbps
FCN-261R024-G/0L
12x up to 3.2Gbps
FCN-261R024-G/5L
12x up to 5Gbps
Equalized Plug Kits
4x Plug Kits - Equalized
RoHS 6/6 (lead free solder)
Data Speeds
Equalized Pair
FCN-261R008-G/6L#08
IB DDR 8 meter, 24AWG
1-4
FCN-261R008-G/6L#10
IB DDR 10 meter, 24AWG
1-4
FCN-261R008-G/6L#12
IB DDR 12 meter, 24AWG
1-4
FCN-261R008-G/6M#08
IB DDR 8 meter, 26AWG
1-4
FCN-261R008-G/6M#10
IB DDR 10 meter, 26AWG
1-4
FCN-261R008-G/6M#12
IB DDR 12 meter, 26AWG
1-4
12x Plug Kits - Equalized
RoHS 6/6 (lead free solder)
Data Speeds
Equalized Pair
FCN-261R024-G/6L#08
12x IB DDR 8 meter, 24AWG
1-12
FCN-261R024-G/6L#10
12x IB DDR 10 meter, 24AWG
1-12
FCN-261R024-G/6L#12
12x IB DDR 12 meter, 24AWG
1-12
FCN-261R024-G/6M#08
12x IB DDR 8 meter, 26AWG
1-12
FCN-261R024-G/6M#10
12x IB DDR 10 meter, 26AWG
1-12
FCN-261R024-G/6M#12
12x IB DDR 12 meter, 26AWG
1-12
IB SDR = InfiniBand Single Data rate - 2.5Gbps
IB DDR = InfiniBand Double Data rate - 5Gbps
Equalized circuits are optimized for cable length / wire AWG
Specifications subject to change
http://us.fujitsu.com/connectors
15
microGiGaCN™ FCN- 260 (D) Series
4X / 12X PLUG CONNECTOR WITHOUT PCB
RECOMMENDED PADDLE CARD OUTLINE
n
DIMENSIONS
3.45±0.1
(0.136±0.004)
2±0.1
(0.079±0.004)
J±0.1(37.95)[1.494]
5.5±0.1 Pad center
(0.217±0.004)
5.25±0.1 (0.507±0.004)
3±0.1(0.120±0.004)
3.2(0.126)
1.6±0.1
(0.063±0.004)
1.7±0.1
(0.067±0.039)
{1.5x(m-1)}[0.059]
14.6±0.1
(0.575±0.039)
1±0.1
(0.669±0.039)
17±0.1
(0.669±0.004)
H±0.1(36.5)[1.437]
G±0.1(38.2)[1.504]
G±0.5(36)[1.417]
1.5±0.05 (0.059±0.002)
0.75±0.05(0.030±0.002)
0.45±0.05
(0.018±0.002)
E±0.5(34.5)[1.358]
1.5±0.05 (0.059±0.002)
0.45±0.05(0.018±0.002)
{1.5x(n-1)-0.75}[0.059(n-1)-0.030]
B(34.5)[1.358]
C(36)[1.417)
Unit: mm (in.)
n PART NUMBERS
Part Number
Pai r
m
n
FCN-261R008-G/A
8
1-8
1- 9
FCN-261R024-G/A
12
Specifications subject to change
B
C
10.5 (0.413 ) 12.0 (0.472 )
1-2 4 1-2 5 34.5 (1.358 ) 36.0 (1.417 )
http://us.fujitsu.com/connectors
16
microGiGaCN™ FCN- 260 (D) Series
4X I/O CABLE ASSEMBLY (LATCH/THUMB SCREW)
CONFORMS TO IBTA DDR / 100GBASE-CX4
n PART NUMBERS
Conforming Standard
IB DDR (5Gbps)
Type
Cable
Cable
length
Part Number
1m
26AWG
Latch
28AWG
30AWG
26AWG
Thumb
screw
Conforming Standard
10GBASE-CX4 (3.215 Gbps)
28AWG
30AWG
Cable
length
Part Number
FCD-ZZ26001
1m
FCD-ZZ22001
2m
FCD-ZZ26002
2m
FCD-ZZ22002
3m
FCD-ZZ26003
3m
FCD-ZZ22003
5m
FCD-ZZ26004
5m
FCD-ZZ22004
1m
FCD-ZZ26011
7m
FCD-ZZ22005
2m
FCD-ZZ26012
10m
FCD-ZZ22006
3m
FCD-ZZ26013
1m
FCD-ZZ22011
1m
FCD-ZZ26021
2m
FCD-ZZ22012
2m
FCD-ZZ26022
3m
FCD-ZZ22013
3m
FCD-ZZ26023
5m
FCD-ZZ22014
1m
FCD-ZZ27001
7m
FCD-ZZ22015
2m
FCD-ZZ27002
10m
FCD-ZZ22016
3m
FCD-ZZ27003
1m
FCD-ZZ22021
5m
FCD-ZZ27004
2m
FCD-ZZ22022
1m
FCD-ZZ27011
3m
FCD-ZZ22023
2m
FCD-ZZ27012
5m
FCD-ZZ22024
3m
FCD-ZZ27013
1m
FCD-ZZ23001
1m
FCD-ZZ27021
2m
FCD-ZZ23002
2m
FCD-ZZ27022
3m
FCD-ZZ23003
3m
FCD-ZZ27023
5m
FCD-ZZ23004
7m
FCD-ZZ23005
10m
FCD-ZZ23006
1m
FCD-ZZ23011
2m
FCD-ZZ23012
3m
FCD-ZZ23013
5m
FCD-ZZ23014
7m
FCD-ZZ23015
10m
FCD-ZZ23016
1m
FCD-ZZ23021
2m
FCD-ZZ23022
3m
FCD-ZZ23023
5m
FCD-ZZ23024
Type
Cable
26AWG
Latch
28AWG
30AWG
26AWG
Thumb
Screw
28AWG
30AWG
Specifications subject to change
http://us.fujitsu.com/connectors
17
microGiGaCN™ FCN- 260 (D) Series
4X I/O CABLE ASSEMBLY (LATCH/THUMB SCREW)
CONFORMS TO IBTA DDR / 100GBASE-CX4
150±20
Inspector No.
(71.9)
49
24.9
Connector 2
S2
S1
S15
G9
S16
G1
14.4
n
DIMENSIONS LATCH TYPE 4X)
Label 2
Label 1
(Cable assembly part number)
S15
G9
S16
S2
S1
G1
microGiGaCN TM I/O
50.8 ±5
Label 1
19.1±5
Connector 1
Specifications subject to change
Fujitsu ComponentLimited
(Lot.No. )
150 ±20
50.8 ±5
Label 2
19.1±5
Unit: mm
http://us.fujitsu.com/connectors
18
microGiGaCN™ FCN- 260 (D) Series
4X / 12X BACKSHELL KITS, WITH LATCHES
CABLE I/O PLUG COVER
n
DIMENSIONS
49
22.9
D
10.3
C
B
E
(A)
7.2
ØF
Projection of die casting cover
Screw M2.5
Polarization
Attached parts
Projection area
Quantity
Back shell screw (M2.5)
2
Ferrule
1
Innter ferrule
1
Back shell latch
2
Spring
1
Aligner*
1
* Aligner is not attached for
FCN-260C008-E/L0
Unit: mm
n PART NUMBERS
Part Number
Pair
FCN-260C008-A/L0
FCN-260C008-C/L0
8
FCN-260C008-E/L0
FCN-260C024-A/L0
FCN-260C024-C/L0
24
FCN-260C024-E/L0
Specifications subject to change
Cable
Dimensions (mm)
A
B
C
D
E
F
24AWG
24.9
17.7
8.7
14.4
7.2
10.45
26AWG
24.9
17.7
8.7
14.4
7.2
9.23
28AWG
24.9
17.7
8.7
14.4
7.2
9.23
24AWG
48.9
41.7
8.7
21.0
10.5
15.65
26AWG
48.9
41.7
8.7
17.5
10.5
14.3
28AWG
48.9
41.7
8.3
16.4
8.2
13.3
http://us.fujitsu.com/connectors
19
microGiGaCN™ FCN- 260 (D) Series
4X LOOPBACK MODULE - 8 PAIRS
FCN-261Z008 (ROHS 5/6) - discontinued, replaced by:
FCN-261Z008L (ROHS 6/6)
nDIMENSIONS
49 (1.929)
(24.9)[0.980]
22.9 (0.902)
Pin Number
7.2
(0.283)
8.7(0.346)
14.4 (0.567)
17.7 (0.697)
10.3(0.406)
7.2
(0.283)
From
To
S1
S16
S2
S15
S3
S14
S4
S13
S5
S12
ScrewM2.5
S2
S16
S6
S11
S7
S10
S8
S9
n PART NUMBER
S1
Unit: mm (in.)
S15
12X LOOPBACK MODULE - 24 PAIRS
FCN-261Z024 (ROHS 5/6)- discontinued, replaced by:
FCN-261Z024L (ROHS 6/6)
nDIMENSIONS
49 (1.929)
(48.9) [1.925]
7.2
(0.283)
20.9 (0.823)
9.61
(0.039)
8.3 (0.327)
10.3 (0.406)
21 (0.827)
41.7 (1.642)
S2
Part Number
Pair
FCN-261Z008L
8
Pin Number
S12
S37
From
To
S13
S36
S1
S48
S14
S35
S2
S47
S15
S34
S3
S46
S16
S33
S4
S45
S17
S32
S5
S44
S18
S31
S6
S43
S19
S30
S7
S42
S20
S29
S8
S41
S21
S28
S9
S40
S22
S27
S10
S39
S23
S26
S11
S38
S24
S25
S48
n PART NUMBER
S1
S47
Specifications subject to change
Unit: mm (in.)
Part Number
Pair
FCN-261Z024L
24
http://us.fujitsu.com/connectors
20
microGiGaCN™ FCN- 260 (D) Series
4X LOOPBACK MODULE - 8 PAIRS WITH THUMBSCREWS
FCN-261Z008-SL
nDIMENSIONS
Screw M2.5
S16
S2
(29.8)
S15
S1
20.15
14.4
10.3
8.7
9.65
49
10.5
Unit: mm
n PART NUMBER
Part Number
Pair
FCN-261Z008-SL
8
Pin Number
From
To
S1
S16
S2
S15
S3
S14
S4
S13
S5
S12
S6
S11
S7
S10
S8
S9
Specifications subject to change
http://us.fujitsu.com/connectors
21
microGiGaCN™ FCN- 260 (D) Series
4X / 12X BACKSHELL KIT, THUMBSCREWS
nDIMENSIONS
7.7 Min.
(Key slot)
K1(Key)
K2(Key)
3.75 (Key)
0.75 (Key)
1.7 Min.
(Key slot width)
C4
10.3
Ø C5
2-M2.5
2.25 (Key)
K3(Key)
K4(Key)
6.75
C3
9.65
C2
C1
Quantity
Attached parts
Thumb screw
49
10.5
Back shell screw (M2.5)
Ferrule
2
1
Inner ferrule
1
Thumbscrew
2
Spring
1
Aligner
Plug key
1
4
Unit: mm
n PART NUMBERS
Part Number
FCN-260C008-A/S3
FCN-260C008-C/S3
FCN-260C024-A/S3
FCN-260C024-C/S3
Pair
8
24
Specifications subject to change
Cable
Dimmensions (mm)
C1
C2
C3
C4
C5
K1
K2
K3
K4
24AWG
29.8
20.15
17.25
14.4
10.45
9.75
6.75
5.25
8.25
26AWG
29.8
20.15
17.25
14.4
9.23
9.75
6.75
5.25
8.25
24AWG
53.8
44.15
41.25
21.0
15.65
33.75
30.75
29.25
32.25
26AWG
53.8
44.15
41.25
17.5
14.3
33.75
30.75
29.25
32.25
http://us.fujitsu.com/connectors
22
microGiGaCN™ FCN- 260 (D) Series
n ASSEMBLY TOOLS
Ferrule Crimp Dies
FCN-237T-T109/H
Hand Press
Ferrule Crimp Dies
Part Number
Applicable Backshell
Applicable Cable OD
Notes
FCN-261T-T002/H
FCN-260C008-A/L0
9.53±0.4
Normally 8 pair, 24AWG
FCN-260C008-A/S3
0.375±0.015
FCN-260C008-C/L0
8.38±0.4
FCN-260C008-C/S3
0.330±0.015
FCN-261T-T101/H
FCN260C024-E/L0
11.05±0.4
0.435±0.015
Normally 24 pair, 28AWG
FCN-261T-T105/H
FCN-260C024-A/L0
15.49±0.4
Normally 24 pair, 24AWG
FCN-260C024-A/S3
0.610±0.015
FCN-261T-T103/H
Normally 8 pair, 26AWG or
28AWG
Both the press and ferrule crimp tool are required for the ferrule crimp process.
Note that additional tooling will be added to cover smaller wire bundle O.D.s. Please check with factory.
Specifications subject to change
http://us.fujitsu.com/connectors
23
microGiGaCN™ FCN- 260 (D) Series
n INSTRUCTIONS FOR CABLE ASSEMBLY
1. Set the crimping dies onto the hand press
After a set is completed
2. A ferrule and a spring are put on the cable.
a. Strip the cable insulator and put the spring, which shall
be moved at the position where it does not interfere with
assembly process.
Spring
c. A ferrule is put on the position of 2mm from
the end of the jacket
d. Strip the shield pair of wires (27mm [1.063in.]
from the ring edge) and then wire insulation
(27.5mm [1.082 in.]).
27
27
.5m
mm
Specifications subject to change
m(
(1.
1.0
06
3)
b. The shield braid is turnd back
and cut the length of 13mm (0.512
in.)
13mm (0.512 in.)
2mm (0.079 in.)
e. A shield of pair wires passed through the
aligner, and solder the wires onto the paddle
card.
82
)
http://us.fujitsu.com/connectors
24
microGiGaCN™ FCN- 260 (D) Series
3. Ferrule crimping:
To explain the process clearly, the following photos do not have a paddle card.
a. Set the cable onto right side of the jig, and end of the jig, ferrule edges are made to become parallel, and
surface of provisional crimp and the connector made to parallel, pre-crimp the ferrule until part A, D hit parts
B, E. (The ferrule becomes an eclipse).
parallel
X(mm)[in.]
Cable
Pa ir
Connector
AW G
X (mm) [in.]
8
24
10.5 [0.413 ]
24
24
15.60 [0.614 ]
b. Confirm that lever is tightened hardly. If it isn't, a lever shall
be pulled to the front and tightened.
c. Set the cable at the table cavity at the left side. (The ferrule
edge/end face shall be parallel to the jig).
If a ring is not able to be inserted into the hollow, loosen with
the lever, and insert the ferrule again. Then tighten with the
lever.
d. Crimp ferrule until parts A, D hit
parts B, E.
Specifications subject to change
e. Hand press is returned to the
original position, and loosened
with the lever pulling forward.
f. Crimp completion.
http://us.fujitsu.com/connectors
25
microGiGaCN™ FCN- 260 (D) Series
Y
(m
Check Y dimension:
m
]
in
)[
C able
Y (m m ) [in.]
P air
AW G
8
24
10.8 [0.425]
24
24
16.00 [0.630]
4. Turn back the jacket and cut in the ferrule edge.
cut in the ferrule edge
5. Installation of cover:
g. Set the cable and soldered with the paddle card into the outer cover. (#1 pin position side of the connector shall be on top) and put another cover, and set the spring, which is initially put on the cable,
at the edge of the ferrule and install it inside and then fix the covers with the screws.
Specifications subject to change
http://us.fujitsu.com/connectors
26
microGiGaCN™ FCN- 260 (D) Series
Fujitsu Components International Headquarter Offices
Contact
Japan
FUJITSU COMPONENT LIMITED
Shinagawa Seaside Park Tower
12-4, Higashi-shinagawa 4-chome,
Tokyo 140 0002, Japan
Tel: (81-3) 3450-1681
Fax: (81-3) 3474-2385
Email: [email protected]
Web: www.fujitsu.com/jp/group/fcl/en/
Europe
FUJITSU COMPONENTS EUROPE B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
China
FUJITSU ELECTRONIC COMPONENTS
(SHANGHAI) CO., LTD.
Unit 4306, InterContinental Center
100 Yu Tong Road, Shanghai 200070,
China
Tel: (86 21) 3253 0998 /Fax: (86 21) 3253 0997
Email: [email protected]
www.fujitsu.com/sg/products/devices/components/
North and South America
FUJITSU COMPONENTS AMERICA, INC.
2290 North First Street, Suite 212
San Jose, CA 95131 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components/
Asia Pacific
FUJITSU COMPONENTS ASIA, LTD.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex,
Singapore 118529
Tel: (65) 6375-8560 / Fax: (65) 6273-3021
Email: [email protected]
www.fujitsu.com/sg/products/devices/components/
Hong Kong
FUJITSU COMPONENTS HONG KONG CO., LTD.
Room 06, 28/F, Greenfield Tower, Concordia Plaza,
No.1 Science Museum Road,
Tsim Sha Tsui East, Kowloon, Hong Kong
Tel: (852) 2881 8495 Fax: (852) 2894 9512
Email: [email protected]
www.fujitsu.com/sg/products/devices/components/
Korea
FUJITSU COMPONENTS KOREA, LTD.
Alpha Tower #403,
645 Sampyeong-dong,
Bundang-gu, Seongnam-si,
Gyeonggi-do, 13524 Korea
Tel: (82 31) 708-7108
Fax: (82 31) 709-7108
Email: [email protected]
www.fujitsu.com/sg/products/devices/components/ Copyright
All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that
the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the
right to change specifications/datasheets without prior notice.
Copyright ©2016 Fujitsu Components America, Inc. All rights reserved. Revised Decmber 9, 2016
Specifications subject to change
http://us.fujitsu.com/connectors
27